Variational quantum eigensolver (VQE) is a hybrid quantum-classical algorithm designed for noisy intermediate-scale quantum (NISQ) computers. It is promising for quantum chemical calculations (QCC) because it can calculate the ground-state energy of molecules. Although VQE has a theoretical potential to achieve a higher accuracy than classical approximation methods, it is challenging to achieve it on current NISQ computers due to the significant impact of noise. Density matrix embedding theory (DMET) is a well-known technique that can be used to decompose a molecule into multiple fragments, which is available to mitigate the noise impact on VQE. However, our preliminary evaluation shows that the naive combination of DMET and VQE hardly mitigates it. In this work, we present two proposals to mitigate the noise impact on the DMET+VQE combination. (1) The size of quantum circuits used by VQE is decreased by reducing the number of bath orbitals which represent interactions between multiple fragments in DMET. (2) While VQE is executed on a NISQ computer, reduced density matrices (RDMs), which are used to calculate the energy of fragments in DMET, are calculated accurately by executing quantum circuits using a noise-less quantum computer simulator. The evaluation using a noisy quantum computer simulator shows that our proposals improve the accuracy of the DMET+VQE combination by an order of magnitude.
Variational quantum eigensolver (VQE) is a hybrid quantum-classical algorithm designed for noisy intermediate-scale quantum (NISQ) computers. It is promising for quantum chemical calculations (QCC) because it can calculate the ground-state energy of molecules. Although VQE has a theoretical potential to achieve a higher accuracy than classical approximation methods, it is challenging to achieve it on current NISQ computers due to the significant impact of noise. Density matrix embedding theory (DMET) is a well-known technique that can be used to decompose a molecule into multiple fragments, which is available to mitigate the noise impact on VQE. However, our preliminary evaluation shows that the naive combination of DMET and VQE hardly mitigates it. In this work, we present two proposals to mitigate the noise impact on the DMET+VQE combination. (1) The size of quantum circuits used by VQE is decreased by reducing the number of bath orbitals which represent interactions between multiple fragments in DMET. (2) While VQE is executed on a NISQ computer, reduced density matrices (RDMs), which are used to calculate the energy of fragments in DMET, are calculated accurately by executing quantum circuits using a noise-less quantum computer simulator. The evaluation using a noisy quantum computer simulator shows that our proposals improve the accuracy of the DMET+VQE combination by an order of magnitude.
Variational quantum eigensolver (VQE) is a hybrid quantum-classical algorithm designed for noisy intermediate-scale quantum (NISQ) computers. It is promising for quantum chemical calculations (QCC) because it can calculate the ground-state energy of a target molecule. Although VQE has a potential to achieve a higher accuracy than classical approximation methods in QCC, it is challenging to achieve it on current NISQ computers due to the significant impact of noises. Density matrix embedding theory (DMET) is a well-known technique to divide a molecule into multiple fragments, which is available to mitigate the noise impact on VQE. However, our preliminary evaluation shows that the naive combination of DMET and VQE does not outperform a gold standard classical method. In this work, we present three approaches to mitigate the noise impact for the DMET+VQE combination. (1) The size of quantum circuits used by VQE is decreased by reducing the number of bath orbitals which represent interactions between multiple fragments in DMET. (2) Reduced density matrices (RDMs), which are used to calculate a molecular energy in DMET, are calculated accurately based on expectation values obtained by executing quantum circuits using a noise-less quantum computer simulator. (3) The parameters of a quantum circuit optimized by VQE are refined with mathematical post-processing. The evaluation using a noisy quantum computer simulator shows that our approaches significantly improve the accuracy of the DMET+VQE combination. Moreover, we demonstrate that on a real NISQ device, the DMET+VQE combination applying our three approaches achieves a higher accuracy than the gold standard classical method.
A variational quantum eigensolver (VQE) designed for noisy intermediate-scale quantum (NISQ) computers is a promising hybrid quantum-classical algorithm for quantum chemical calculations (QCC). Its accuracy and computational cost strongly depend on an ansatz, and unitary coupled-cluster (UCC) ansatze are well-known chemistry-inspired ansatze that can achieve a high accuracy for QCC. However, UCC-based quantum circuits have a high depth and a lot of 2-qubit controlled NOT (CNOT) gates which are sensitive to noises, leading to the low accuracy of VQE running on NISQ computers. To address this issue, we propose a novel offline quantum circuit pruning technique that reduces the number of CNOT gates and depth of UCC-based quantum circuits by reducing the number of excitation operators per parameter to a user-specified value. It is applied only once before VQE is executed (i.e., offline), which is the advantage over state-of-the-art quantum circuit pruning techniques. The evaluation using a quantum computer simulator with a noise model based on a real NISQ device shows that our offline pruning technique improves the accuracy of UCCSD-VQE while sustaining the potential accuracy of the UCCSD ansatz and has a synergy with a well-known noise mitigation method called zero noise extrapolation (ZNE).
Abstract Quantum computers are expected to be highly beneficial for chemistry simulations, promising significant improvements in accuracy and speed. The most prominent algorithm for chemistry simulations on NISQ devices is the Variational Quantum Eigensolver (VQE). It is a hybrid quantum-classical algorithm which calculates the ground state energy of a Hamiltonian based on parametrized quantum circuits, while a classical optimizer is used to find optimal parameter values. However, quantum hardware is affected by noise, and it needs to be understood to which extent it can degrade the performance of the VQE algorithm. In this paper, we study the impact of noise on the example of the hydrogen molecule. First, we compare the VQE performance for a set of various optimizers, from which we find NFT to be the most suitable one. Next, we quantify the effect of different noise sources by systematically increasing their strength. The noise intensity is varied around values common to superconducting devices of IBM Q, and curve fitting is used to model the relationship between the obtained energy values and the noise magnitude. Since the amount of noise in a circuit highly depends on its architecture, we perform our studies for different ansatzes, including both hardware-efficient and chemistry-inspired ones. Finally, we compare our results from noisy simulations with experiments on different IBM hardware devices.
As a hybrid quantum-classical algorithm, the variational quantum eigensolver is widely applied in quantum chemistry simulations, especially in computing the electronic structure of complex molecular systems. However, on existing noisy intermediate-scale quantum devices, some factors such as quantum decoherence, measurement errors, and gate operation imprecisions are unavoidable. To overcome these challenges, this study proposes an efficient noise-mitigating variational quantum eigensolver for accurate computation of molecular ground state energies in noisy environments. We design the quantum circuit with reference to the structure of matrix product states and utilize it to pre-train the circuit parameters, which ensures circuit stability and mitigates fluctuations caused by initialization. We also employ zero-noise extrapolation to mitigate quantum noise and combine it with neural networks to improve the accuracy of the noise-fitting function, which significantly eliminates noise interference. Furthermore, we implement an intelligent grouping strategy for measuring Hamiltonian Pauli strings, which not only reduces measurement errors but also improves sampling efficiency. We perform numerical simulations to solve the ground state energy of the H4molecule by using MindSpore Quantum framework, and the results demonstrate that our algorithm can constrain noise errors within the range of O(10−2)∼O(10−1), outperforming mainstream variational quantum eigensolvers. This work provides a new strategy for high-precision quantum chemistry calculations on near-term noisy quantum hardware.
Simulating strongly correlated molecular systems on near-term quantum hardware remains challenging because current hardware offers limited quantum volume and moderate-fidelity qubits. One way to address this challenge is through bootstrap embedding (BE). Bootstrap embedding partitions molecules into smaller fragments that are then embedded in the ``bath'' of other fragments iteratively. Bootstrap embedding is appealing for quantum simulation because fragmentation reduces the qubit requirements of each fragment problem. In this work, we develop a quantum bootstrap embedding (QBE) workflow that uses variational quantum eigensolver (VQE) fragment solvers and examines the algorithmic choices that determine the success of the overall VQE-QBE procedure. To improve efficiency, we introduce FastAdaptVQE, a sparse-matrix-accelerated form of the adaptive variational quantum eigensolver (ADAPT-VQE) that replaces symbolic commutator evaluation with direct statevector calculations, and MatrixFreeAdaptVQE, a matrix-free extension that removes the sparse-matrix memory bottleneck that arises for larger fragments. We also explore modifying the ADAPT-VQE operator-selection step by replacing the purely greedy choice with a lookahead strategy. Benchmarks on H4, F2, and selected geometries of H6 reach chemical accuracy, within 1 kcal/mol of BE results obtained with a full configuration interaction (FCI) solver. For n-butane, density-matching residuals converged, but energy errors remained outside chemical accuracy. These results show that combining QBE with VQE can accurately compute molecular energies, while density convergence alone does not ensure energy accuracy. This work lays the foundation for extending these energy calculations to larger molecular systems and quantum materials on near-term quantum hardware.
High Resolution Image Download MS PowerPoint Slide The recent developments of quantum computing present novel potential pathways for quantum chemistry as the scaling of the computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g., quantum phase estimation), but the limited capabilities of current noisy intermediate-scale quantum devices motivated the development of less demanding hybrid algorithms. In this context, the variational quantum eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground-state energies of small molecules. This study investigates the folded spectrum (FS) method as an extension of the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy using the same or quantum circuit as for the ground-state calculation. Inspired by the variance-based methods from the quantum Monte Carlo literature, the FS method minimizes the energy variance, thus, in principle, requiring a computationally expensive squared Hamiltonian to be applied. We alleviate this potentially poor scaling by employing a Pauli grouping procedure to identify sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction in the computational cost. We applied the FS-VQE method to small molecules (H 2, LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. Furthermore, we explore the application of quantum error mitigation techniques, demonstrating improved energy accuracy on noisy simulators compared with simulations without mitigation.