Abstract Quantum computers are expected to be highly beneficial for chemistry simulations, promising significant improvements in accuracy and speed. The most prominent algorithm for chemistry simulations on NISQ devices is the Variational Quantum Eigensolver (VQE). It is a hybrid quantum-classical algorithm which calculates the ground state energy of a Hamiltonian based on parametrized quantum circuits, while a classical optimizer is used to find optimal parameter values. However, quantum hardware is affected by noise, and it needs to be understood to which extent it can degrade the performance of the VQE algorithm. In this paper, we study the impact of noise on the example of the hydrogen molecule. First, we compare the VQE performance for a set of various optimizers, from which we find NFT to be the most suitable one. Next, we quantify the effect of different noise sources by systematically increasing their strength. The noise intensity is varied around values common to superconducting devices of IBM Q, and curve fitting is used to model the relationship between the obtained energy values and the noise magnitude. Since the amount of noise in a circuit highly depends on its architecture, we perform our studies for different ansatzes, including both hardware-efficient and chemistry-inspired ones. Finally, we compare our results from noisy simulations with experiments on different IBM hardware devices.
Abstract Quantum computers are expected to be highly beneficial for chemistry simulations, promising significant improvements in accuracy and speed. The most prominent algorithm for chemistry simulations on NISQ devices is the Variational Quantum Eigensolver (VQE). It is a hybrid quantum-classical algorithm which calculates the ground state energy of a Hamiltonian based on parametrized quantum circuits, while a classical optimizer is used to find optimal parameter values. However, quantum hardware is affected by noise, and it needs to be understood to which extent it can degrade the performance of the VQE algorithm. In this paper, we study the impact of noise on the example of the hydrogen molecule. First, we compare the VQE performance for a set of various optimizers, from which we find NFT to be the most suitable one. Next, we quantify the effect of different noise sources by systematically increasing their strength. The noise intensity is varied around values common to superconducting devices of IBM Q, and curve fitting is used to model the relationship between the obtained energy values and the noise magnitude. Since the amount of noise in a circuit highly depends on its architecture, we perform our studies for different ansatzes, including both hardware-efficient and chemistry-inspired ones. Finally, we compare our results from noisy simulations with experiments on different IBM hardware devices.
Variational quantum algorithms are suitable for use on noisy quantum systems. One of the most important use-cases is the quantum simulation of materials, using the variational quantum eigensolver (VQE). To optimize VQE performance, a suitable parameterized quantum circuit (ansatz) must be selected. We investigate a class of ansatze that incorporates knowledge of the quantum hardware, namely the hardware efficient ansatze. The performance of hardware efficient ansatze is affected differently by noise, and our goal is to study the effect of noise on evaluating which ansatz gives more accurate results in practice. First, we study the effect of noise on the different hardware efficient ansatze by benchmarking and ranking the performance of each ansatz family (i) on a chemistry application using VQE and (ii) by the recently established metric of "expressibility". The results demonstrate the ranking of optimal circuits does not remain constant in the presence of noise. Second, we evaluate the suitability of the expressibility measure in this context by performing a correlation study between expressibility and the performance of the same circuits on a chemistry application using VQE. Our simulations reveal a weak correlation and therefore demonstrate that expressibility is not an adequate measure to quantify the effectiveness of parameterized quantum circuits for quantum chemistry. Third, we evaluate the effect of different quantum device noise models on the ordering of which ansatz family is best. Interestingly, we see that to decide which ansatz is optimal for use, one needs to consider the specific hardware used even within the same family of quantum hardware.
The Variational Quantum Eigensolver (VQE) is a promising quantum algorithm for applications in chemistry within the Noisy Intermediate-Scale Quantum (NISQ) era. The ability for a quantum computer to simulate electronic structures with high accuracy would have a profound impact on material and biochemical science with potential applications e.g., to the development of new drugs. However, considering the variety of quantum hardware architectures, it is still uncertain which hardware concept is most suited to execute the VQE for e.g., the simulation of molecules. Aspects to consider here are the required connectivity of the quantum circuit used, the size and the depth and thus the susceptibility to noise effects. Besides theo-retical considerations, empirical studies using available quantum hardware may help to clarify the question of which hardware technology might be better suited for a certain given application and algorithm. Going one step into this direction, within this work, we present results using the VQE for the simulation of the hydrogen molecule, comparing superconducting and ion trap quantum computers. The experiments are carried out with a standardized setup of ansatz and optimizer, selected to reduce the number of required iterations. The findings are analyzed considering different quantum processor types, calibration data as well as the depth and gate counts of the circuits required for the different hardware concepts after transpilation.
New approaches into computational quantum chemistry can be developed through the use of quantum computing. While universal, fault-tolerant quantum computers are still not available, and we want to utilize today's noisy quantum processors. One of their flagship applications is the variational quantum eigensolver (VQE)-an algorithm for calculating the minimum energy of a physical Hamiltonian. In this study, we investigate how various types of errors affect the VQE and how to efficiently use the available resources to produce precise computational results. We utilize a simulator of a noisy quantum device, an exact statevector simulator, and physical quantum hardware to study the VQE algorithm for molecular hydrogen. We find that the optimal method of running the hybrid classical-quantum optimization is to: (i) allow some noise in intermediate energy evaluations, using fewer shots per step and fewer optimization iterations, but ensure a high final readout precision; (ii) emphasize efficient problem encoding and ansatz parametrization; and (iii) run all experiments within a short time-frame, avoiding parameter drift with time. Nevertheless, current publicly available quantum resources are still very noisy and scarce/expensive, and even when using them efficiently, it is quite difficult to perform trustworthy calculations of molecular energies.
Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the noisy intermediate-scale quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various well known strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides an assessment of current quantum algorithms for molecular modeling on real quantum hardware, highlighting the impact of noise and hardware limitations on the achievable accuracy.
Variational quantum eigensolver (VQE) is a hybrid quantum-classical algorithm designed for noisy intermediate-scale quantum (NISQ) computers. It is promising for quantum chemical calculations (QCC) because it can calculate the ground-state energy of a target molecule. Although VQE has a potential to achieve a higher accuracy than classical approximation methods in QCC, it is challenging to achieve it on current NISQ computers due to the significant impact of noises. Density matrix embedding theory (DMET) is a well-known technique to divide a molecule into multiple fragments, which is available to mitigate the noise impact on VQE. However, our preliminary evaluation shows that the naive combination of DMET and VQE does not outperform a gold standard classical method. In this work, we present three approaches to mitigate the noise impact for the DMET+VQE combination. (1) The size of quantum circuits used by VQE is decreased by reducing the number of bath orbitals which represent interactions between multiple fragments in DMET. (2) Reduced density matrices (RDMs), which are used to calculate a molecular energy in DMET, are calculated accurately based on expectation values obtained by executing quantum circuits using a noise-less quantum computer simulator. (3) The parameters of a quantum circuit optimized by VQE are refined with mathematical post-processing. The evaluation using a noisy quantum computer simulator shows that our approaches significantly improve the accuracy of the DMET+VQE combination. Moreover, we demonstrate that on a real NISQ device, the DMET+VQE combination applying our three approaches achieves a higher accuracy than the gold standard classical method.
The variational quantum eigensolver (VQE) is a promising algorithm to demonstrate quantum advantage on near-term noisy-intermediate-scale quantum (NISQ) computers. One central problem of VQE is the effect of noise, especially physical noise, on realistic quantum computers. We systematically study the effect of noise for the VQE algorithm by performing numerical simulations with various local noise models, including amplitude damping, dephasing, and depolarizing noise. We show that the ground state energy will deviate from the exact value as the noise probability increase, and typically, the noise will accumulate as the circuit depth increase. The results suggest that the noisy quantum system can remain entanglement at the noise level of NISQ devices by comparing the VQE solution with the mean-field solution for the many-body ground state problem. We build a noise model to capture the noise in a real quantum computer, and the corresponding numerical simulation is consistent with experimental results on IBM Quantum computers through cloud. Our work sheds new light on the practical research of noisy VQE, and the deep understanding of the noise effect of VQE will also help develop error mitigation techniques on near-term quantum computers.