Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Hybrid Nb/MoGe Josephson Junctions for the Development of Flux-Flow-Type Josephson Oscillators

Ivan P. Nevirkovets

Published Dec 26, 2024• 0 citations
Publisher

Abstract

Josephson junctions (JJs) with layered Nb/MoGe electrodes were fabricated and characterized at 4.2 K. Mo0.75Ge0.25is known to be a superconductor with the transition temperature of up to 7.4 K. It is essentially an amorphous material that has very uniform and smooth surface in thin-film form. This allowed us to fabricate high-quality all-MoGe Josephson junctions with very thin Al overlayer to form AlOxbarrier [Supercond. Sci. Technol., vol. 35, Article no. 035008, 2022]. Here we report JJs with composite Nb/MoGe electrodes aiming at development of flux-flow-type Josephson oscillators operating at low frequencies suitable for qubit control. Using MoGe allows one to preserve a large effective magnetic penetration depth and a high kinetic inductance of the electrodes, which results in (i) a standing wave (Fiske) resonance to occur at lower frequencies, and (ii) in a higher impedance of the oscillator; the latter is important for matching it with other elements of the superconducting circuit. At the same time, using Nb as a part of the composite electrode allows one to maintain the critical parameters (critical current and voltage) of the JJ close to those of the Nb-based JJs. In addition, damping in hybrid Nb/MoGe JJs is lower than that in all-MoGe JJs, which results in a higher current of flux-flow steps, and potentially, in a higher microwave emission power.

DOI
10.1109/tasc.2024.3523254

Related papers

Josephson Oscillators Based on Amorphous Superconductors

Ivan P. Nevirkovets, John B. Ketterson

Thin films of amorphous MoxGe1-xgrown with magnetron sputtering are known to exhibit excellent homogeneity and fairly high superconducting transition temperatures (up to 7.5 K). These properties make MoGe thin films suitable to form high-quality tunnel junctions, as demonstrated recently by our group [see Supercond. Sci. Technol. 35, 035008 (2022)]. Here, we report the experimental demonstration of an MoGe/Al/AlOx/(Al)MoGe Josephson oscillator based on amorphous superconductor MoGe, which allows for continuous tuning of the oscillation frequency from about 1 GHz up to tens of GHz. We believe such an oscillator may be useful as a compact on-chip microwave source suitable to control some types of qubits based on Josephson junctions.

IEEE Transactions on Applied Superconductivity•Feb 3, 2023•1 citation

Dynamics and Applications of Long Josephson Junctions

Yongming Zhang

The first object of this work is to theoretically study the effects of tunnel junction parameters on flux-flow Josephson oscillators (FFOs) by numerical simulation and to experimentally study the rf properties of FFOs by integrating them together with an SIS (superconductor-insulator-superconductor) mixer/detector on a chip. By using a CAD modeled integrated sub-mm wave receiver, the composite linewidth of two FFOs was measured to be less than 2.1 MHz in the band 280-330 GHz. The receiver consists of two identical FFOs and an SIS mixer. The linewidth was determined by mixing the two signals in the SIS mixer and analyzing the intermediate frequency. The output power coupled to a 10 .OMEGA. microstripline was about 0.5 µW, and could be adjusted by changing the current bias of the oscillator. The FFOs are connected to the SIS mixer via interdigital capacitors. The FFOs and the SIS element are made of Nb/NbOx/PbBi junctions by the "reactive ion beam oxidation" technique with the critical current density jc controlled by the oxidation time. Lift-off stencils for defining the junction sizes and the top-electrodes were made by using electron-beam writing on PMMA/Copolymer double layer resist. The jc of a long Josephson junction (LJJ) determines the fluxon motion. For LJJs which had jc > 1 kA/cm2, velocity-matching (VM, where the phase velocity of propagating fluxons equals that of the electromagnetic wave in the LJJ) steps could be tuned linearly from about 0.2 to 1.4 mV by an applied magnetic field. Coupled radiation at around 100 GHz (about 3 nW), 261 GHz (4.6 nW), and 330 GHz (0.43 µW), from flux-flow oscillations, was observed. From the step's steepness, the junction quality factor QJ is determined. QJ is between 4 to 7 in the voltage range of 0.4 to 1 mV. Coupled radiation (> 3 nW) at around 100 GHz corresponding to resonant soliton oscillation in low jc samples (250 to 1000 A/cm2) was detected. Simulations show that, for a uniform bias feed, the height of the VM step .gammam increases almost linearly with the external magnetic field .beta.e and the quasiparticle loss .alpha., but is less dependent on the surface loss .beta.. An approximate expression .gammam = a + .alpha(1+b).beta.e agrees with simulations. The maximum ac output voltage decreases with increasing dampings .alpha. and .beta.. It is important to include the .beta.-term in the mathematical model. The second part of this work is devoted to rf properties of long YBa2Cu3O7-.delta. (YBCO) grain boundary junctions made on 0- 32 °. [001]-tilt YSZ bicrystals. Josephson flux-flow resonances and Fiske resonances were observed. The first resonances could be tuned from about 0.5 to 2.0 mV in a 30 µm long junction at 16 K, and we determined the ratio between barrier thickness and relative dielectric constant td/.epsilon.r=2.9 Å and the loss .alpha.= 1.3 at 16 K. Simulations support the experimental observation that Josephson vortices can propagate unidirectionally in an overdamped, homogeneous junction up to .alpha.Ã? 2. From the Fiske resonances at 256-638 GHz, their Q-values, and the Steward-McCumber parameter, we find td/.epsilon.r=4 Å, the London penetration depth .gamma.L=145±5 nm and the surface resistance RS ~20 m.OMEGA. at 280 GHz. We conclude that the boundary is dielectric and the YBCO grains are well superconducting within 5-20 nm from the boundary. The dielectric between the grains could be part of a tunnel barrier and/or a matrix for filamentary conduction. Josephson flux-flow transitors based on long bicrystal junctions were made with an Au loop used as the control line. The line modulated the critical current Ic. Current gain larger than unity was obtained below 70 K. The gain increased with the junction length and varied roughly like the square root Ic when adjusting the temperature. A transresistance larger than 5 .OMEGA. was obtained at 15 K. Better performance is expected from junctions with high current densities.

•Jan 1, 1993•8 citations

NbN-based half-flux-quantum element for integration with superconducting qubits

Naoki Takeuchi, Mikiya Naruse, Shigeyuki Miyajima +4 more

Half-flux-quantum (HFQ) logic is a superconductor logic family comprising conventional Josephson junctions (0-JJs) and π Josephson junctions (π-JJs). The energy scale of HFQ logic can be flexibly reduced by phase shifts owing to π-JJs; thus, HFQ circuits are a promising building block for qubit interface circuits. In this study, we demonstrate an NbN-based HFQ circuit element compatible with NbN-based superconducting qubits for all-NbN monolithic integration of qubits and HFQ circuits. The use of NbN is beneficial for both qubits and HFQ circuits owing to its high-quality junctions and high kinetic inductance. First, we developed a prototype of an NbN-based 0-JJ/π-JJ hybrid fabrication process for designing HFQ circuits. We evaluated 0-JJs and π-JJs fabricated through the hybrid process, which demonstrated that the 0-JJs had a small deviation with regard to critical current density and the π-JJs had a sufficiently high critical current density to work as π phase shifters. Furthermore, we fabricated an HFQ superconducting quantum interference device, which is one of the most fundamental elements in HFQ circuits, and observed clear HFQ-period modulation in the magnetic flux dependence of the maximum current at 4.2 K.

Applied Physics Letters•Apr 8, 2024•4 citations

Shunted Josephson Junctions and Optimization of Niobium Integrated Matching Circuits

M. S. Shevchenko, Artemiy A. Atepalikhin, Fedor V. Khan +3 more

Josephson junctions (JJs) with non-hysteretic I-V characteristic and high critical parameters are required for many applications; in particular, they are needed to create tunable THz range oscillators. We fabricated and studied shunted superconductor-insulator-superconductor (SIS) Nb-AlOx-Nb tunnel junctions with an area of about 1μm2, estimated their parameters, and compared them with theoretical models. To assess the performance of shunted junctions in the terahertz range, their characteristics were studied under the influence of a high-frequency signal; the estimated value of the characteristic voltage for the shunted junction at a high frequency is about 1 mV. To improve the circuit parameters, a new type of the shunting based on application of NIS junctions was proposed, which reduces the influence of parasitic inductance, expands the frequency range of the generator, and decreases the size of the structure. The JJs with a new type of shunting have been fabricated and studied. The niobium integrated circuits intended for matching the superconducting oscillator and an SIS junction as a microwave detector were designed, fabricated, and tested. Such structures are required for studying the spectral characteristics and analyzing the operation of the oscillator. The developed circuits have demonstrated efficient operation at frequencies from 300 to 700 GHz; the experimental results are in good agreement with the simulated characteristics. The results obtained will be implemented for further development of the THz range oscillators.

IEEE Transactions on Applied Superconductivity•Nov 23, 2021•7 citations

NbN,Nb Double-Layered Base-Electrode Josephson Junctions

S. Kosaka, Kazuyoshi Kojima, Fujitoshi Shinoki +2 more

A new structure of the base-electrode for Josephson devices have been developed in which niobium (Nb) and niobium nitride (NbN) films were sequentially sputtered to form a double-layered structure. Owing to this structure, it is possible not only to reduce the kinetic inductance of the base-electrode due to the small penetration depth of Nb film, but also to obtain good tunneling characteristics with a small subgap conductance due to the surface stability of NbN film. Single-flux-quantum (SFQ) memory cells with this structure have been fabricated and it has been observed that the kinetic inductance is much decreased comparing with that of the SFQ cell with a base-electrode of NbN single layer.

International Conference on Solid State Devices and Materials (SSDM)•Aug 26, 1981•1 citation

Properties of Unshunted and Resistively Shunted Nb/AlOx-Al/Nb Josephson Junctions With Critical Current Densities From 0.1 to 1 mA/μm2

Sergey K. Tolpygo, Vladimir Bolkhovsky, Scott Zarr +5 more

We investigated current-voltage characteristics of unshunted and externally shunted Josephson junctions (JJs) with high critical current densities Jcin order to extract their basic parameters and statistical characteristics for JJ modeling in superconducting integrated circuits as well as to assess their potential for future technology nodes. Nb/AlOx-Al/Nb junctions with diameters from 0.5 to 6 μm were fabricated using a fully planarized process with Mo or MoNxthin-film shunt resistors with sheet resistance Rsq= 2 Ω/sq and Rsq= 6 Ω/sq, respectively. We used our current standard MIT Lincoln Laboratory process node SFQ5ee to fabricate JJs with Jc= 0.1 mA/μm2and our new process node SFQ5hs (where “hs” stands for high speed) to make JJs with Jc= 0.2 mA/μm2and higher current densities up to about 1 mA/μm2. Using LRC resonance features on the I-V characteristics of shunted JJs, we extract the inductance associated with Mo shunt resistors of 1.4 pH/sq. The main part of this inductance, about 1.1 pH/sq, is the inductance of the 40-nm Mo resistor film, while the geometrical inductance of superconducting Nb wiring contributes the rest. We attribute this large inductance to “kinetic” inductance arising from the complex conductivity of a thin normal-metal film in an electromagnetic field with angular frequency ω, σ(ω) = σ0/(1 + iωτ), where σ0is the static conductivity and r the electron scattering time. Using a resonance in a large-area unshunted high-Jcjunction excited by a resistively coupled small-area shunted JJ, we extract the Josephson plasma frequency and specific capacitance of high-Jcjunctions in 0.1-1 mA/μm2Jcrange. We also present data on Jctargeting and JJ critical current spreads. We discuss the potential of using 0.2-mA/μm2JJs in very large scale integration single flux quantum circuits and 0.5-mA/μm2JJs in high-density integrated circuits without shunt resistors.

arXiv:1612.08435•IEEE Transactions on Applied Superconductivity•Feb 13, 2017•85 citations
Josephson junctions (JJs) with layered Nb/MoGe electrodes were fabricated and characterized at 4.2 K. Mo0.75Ge0.25is known to be a superconductor with the transition temperature of up to 7.4 K. It is essentially an amorphous material that has very uniform and smooth surface in thin-film form. This allowed us to fabricate high-quality all-MoGe Josephson junctions with very thin Al overlayer to form AlOxbarrier [Supercond. Sci. Technol., vol. 35, Article no. 035008, 2022]. Here we report JJs with composite Nb/MoGe electrodes aiming at development of flux-flow-type Josephson oscillators operating at low frequencies suitable for qubit control. Using MoGe allows one to preserve a large effective magnetic penetration depth and a high kinetic inductance of the electrodes, which results in (i) a standing wave (Fiske) resonance to occur at lower frequencies, and (ii) in a higher impedance of the oscillator; the latter is important for matching it with other elements of the superconducting circuit. At the same time, using Nb as a part of the composite electrode allows one to maintain the critical parameters (critical current and voltage) of the JJ close to those of the Nb-based JJs. In addition, damping in hybrid Nb/MoGe JJs is lower than that in all-MoGe JJs, which results in a higher current of flux-flow steps, and potentially, in a higher microwave emission power.
Thin films of amorphous MoxGe1-xgrown with magnetron sputtering are known to exhibit excellent homogeneity and fairly high superconducting transition temperatures (up to 7.5 K). These properties make MoGe thin films suitable to form high-quality tunnel junctions, as demonstrated recently by our group [see Supercond. Sci. Technol. 35, 035008 (2022)]. Here, we report the experimental demonstration of an MoGe/Al/AlOx/(Al)MoGe Josephson oscillator based on amorphous superconductor MoGe, which allows for continuous tuning of the oscillation frequency from about 1 GHz up to tens of GHz. We believe such an oscillator may be useful as a compact on-chip microwave source suitable to control some types of qubits based on Josephson junctions.
The first object of this work is to theoretically study the effects of tunnel junction parameters on flux-flow Josephson oscillators (FFOs) by numerical simulation and to experimentally study the rf properties of FFOs by integrating them together with an SIS (superconductor-insulator-superconductor) mixer/detector on a chip. By using a CAD modeled integrated sub-mm wave receiver, the composite linewidth of two FFOs was measured to be less than 2.1 MHz in the band 280-330 GHz. The receiver consists of two identical FFOs and an SIS mixer. The linewidth was determined by mixing the two signals in the SIS mixer and analyzing the intermediate frequency. The output power coupled to a 10 .OMEGA. microstripline was about 0.5 µW, and could be adjusted by changing the current bias of the oscillator. The FFOs are connected to the SIS mixer via interdigital capacitors. The FFOs and the SIS element are made of Nb/NbOx/PbBi junctions by the "reactive ion beam oxidation" technique with the critical current density jc controlled by the oxidation time. Lift-off stencils for defining the junction sizes and the top-electrodes were made by using electron-beam writing on PMMA/Copolymer double layer resist. The jc of a long Josephson junction (LJJ) determines the fluxon motion. For LJJs which had jc > 1 kA/cm2, velocity-matching (VM, where the phase velocity of propagating fluxons equals that of the electromagnetic wave in the LJJ) steps could be tuned linearly from about 0.2 to 1.4 mV by an applied magnetic field. Coupled radiation at around 100 GHz (about 3 nW), 261 GHz (4.6 nW), and 330 GHz (0.43 µW), from flux-flow oscillations, was observed. From the step's steepness, the junction quality factor QJ is determined. QJ is between 4 to 7 in the voltage range of 0.4 to 1 mV. Coupled radiation (> 3 nW) at around 100 GHz corresponding to resonant soliton oscillation in low jc samples (250 to 1000 A/cm2) was detected. Simulations show that, for a uniform bias feed, the height of the VM step .gammam increases almost linearly with the external magnetic field .beta.e and the quasiparticle loss .alpha., but is less dependent on the surface loss .beta.. An approximate expression .gammam = a + .alpha(1+b).beta.e agrees with simulations. The maximum ac output voltage decreases with increasing dampings .alpha. and .beta.. It is important to include the .beta.-term in the mathematical model. The second part of this work is devoted to rf properties of long YBa2Cu3O7-.delta. (YBCO) grain boundary junctions made on 0- 32 °. [001]-tilt YSZ bicrystals. Josephson flux-flow resonances and Fiske resonances were observed. The first resonances could be tuned from about 0.5 to 2.0 mV in a 30 µm long junction at 16 K, and we determined the ratio between barrier thickness and relative dielectric constant td/.epsilon.r=2.9 Å and the loss .alpha.= 1.3 at 16 K. Simulations support the experimental observation that Josephson vortices can propagate unidirectionally in an overdamped, homogeneous junction up to .alpha.Ã? 2. From the Fiske resonances at 256-638 GHz, their Q-values, and the Steward-McCumber parameter, we find td/.epsilon.r=4 Å, the London penetration depth .gamma.L=145±5 nm and the surface resistance RS ~20 m.OMEGA. at 280 GHz. We conclude that the boundary is dielectric and the YBCO grains are well superconducting within 5-20 nm from the boundary. The dielectric between the grains could be part of a tunnel barrier and/or a matrix for filamentary conduction. Josephson flux-flow transitors based on long bicrystal junctions were made with an Au loop used as the control line. The line modulated the critical current Ic. Current gain larger than unity was obtained below 70 K. The gain increased with the junction length and varied roughly like the square root Ic when adjusting the temperature. A transresistance larger than 5 .OMEGA. was obtained at 15 K. Better performance is expected from junctions with high current densities.
Half-flux-quantum (HFQ) logic is a superconductor logic family comprising conventional Josephson junctions (0-JJs) and π Josephson junctions (π-JJs). The energy scale of HFQ logic can be flexibly reduced by phase shifts owing to π-JJs; thus, HFQ circuits are a promising building block for qubit interface circuits. In this study, we demonstrate an NbN-based HFQ circuit element compatible with NbN-based superconducting qubits for all-NbN monolithic integration of qubits and HFQ circuits. The use of NbN is beneficial for both qubits and HFQ circuits owing to its high-quality junctions and high kinetic inductance. First, we developed a prototype of an NbN-based 0-JJ/π-JJ hybrid fabrication process for designing HFQ circuits. We evaluated 0-JJs and π-JJs fabricated through the hybrid process, which demonstrated that the 0-JJs had a small deviation with regard to critical current density and the π-JJs had a sufficiently high critical current density to work as π phase shifters. Furthermore, we fabricated an HFQ superconducting quantum interference device, which is one of the most fundamental elements in HFQ circuits, and observed clear HFQ-period modulation in the magnetic flux dependence of the maximum current at 4.2 K.
Josephson junctions (JJs) with non-hysteretic I-V characteristic and high critical parameters are required for many applications; in particular, they are needed to create tunable THz range oscillators. We fabricated and studied shunted superconductor-insulator-superconductor (SIS) Nb-AlOx-Nb tunnel junctions with an area of about 1μm2, estimated their parameters, and compared them with theoretical models. To assess the performance of shunted junctions in the terahertz range, their characteristics were studied under the influence of a high-frequency signal; the estimated value of the characteristic voltage for the shunted junction at a high frequency is about 1 mV. To improve the circuit parameters, a new type of the shunting based on application of NIS junctions was proposed, which reduces the influence of parasitic inductance, expands the frequency range of the generator, and decreases the size of the structure. The JJs with a new type of shunting have been fabricated and studied. The niobium integrated circuits intended for matching the superconducting oscillator and an SIS junction as a microwave detector were designed, fabricated, and tested. Such structures are required for studying the spectral characteristics and analyzing the operation of the oscillator. The developed circuits have demonstrated efficient operation at frequencies from 300 to 700 GHz; the experimental results are in good agreement with the simulated characteristics. The results obtained will be implemented for further development of the THz range oscillators.
A new structure of the base-electrode for Josephson devices have been developed in which niobium (Nb) and niobium nitride (NbN) films were sequentially sputtered to form a double-layered structure. Owing to this structure, it is possible not only to reduce the kinetic inductance of the base-electrode due to the small penetration depth of Nb film, but also to obtain good tunneling characteristics with a small subgap conductance due to the surface stability of NbN film. Single-flux-quantum (SFQ) memory cells with this structure have been fabricated and it has been observed that the kinetic inductance is much decreased comparing with that of the SFQ cell with a base-electrode of NbN single layer.
We investigated current-voltage characteristics of unshunted and externally shunted Josephson junctions (JJs) with high critical current densities Jcin order to extract their basic parameters and statistical characteristics for JJ modeling in superconducting integrated circuits as well as to assess their potential for future technology nodes. Nb/AlOx-Al/Nb junctions with diameters from 0.5 to 6 μm were fabricated using a fully planarized process with Mo or MoNxthin-film shunt resistors with sheet resistance Rsq= 2 Ω/sq and Rsq= 6 Ω/sq, respectively. We used our current standard MIT Lincoln Laboratory process node SFQ5ee to fabricate JJs with Jc= 0.1 mA/μm2and our new process node SFQ5hs (where “hs” stands for high speed) to make JJs with Jc= 0.2 mA/μm2and higher current densities up to about 1 mA/μm2. Using LRC resonance features on the I-V characteristics of shunted JJs, we extract the inductance associated with Mo shunt resistors of 1.4 pH/sq. The main part of this inductance, about 1.1 pH/sq, is the inductance of the 40-nm Mo resistor film, while the geometrical inductance of superconducting Nb wiring contributes the rest. We attribute this large inductance to “kinetic” inductance arising from the complex conductivity of a thin normal-metal film in an electromagnetic field with angular frequency ω, σ(ω) = σ0/(1 + iωτ), where σ0is the static conductivity and r the electron scattering time. Using a resonance in a large-area unshunted high-Jcjunction excited by a resistively coupled small-area shunted JJ, we extract the Josephson plasma frequency and specific capacitance of high-Jcjunctions in 0.1-1 mA/μm2Jcrange. We also present data on Jctargeting and JJ critical current spreads. We discuss the potential of using 0.2-mA/μm2JJs in very large scale integration single flux quantum circuits and 0.5-mA/μm2JJs in high-density integrated circuits without shunt resistors.