Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Josephson Oscillators Based on Amorphous Superconductors

Ivan P. Nevirkovets, John B. Ketterson

Published Feb 3, 2023• 1 citation
Publisher

Abstract

Thin films of amorphous MoxGe1-xgrown with magnetron sputtering are known to exhibit excellent homogeneity and fairly high superconducting transition temperatures (up to 7.5 K). These properties make MoGe thin films suitable to form high-quality tunnel junctions, as demonstrated recently by our group [see Supercond. Sci. Technol. 35, 035008 (2022)]. Here, we report the experimental demonstration of an MoGe/Al/AlOx/(Al)MoGe Josephson oscillator based on amorphous superconductor MoGe, which allows for continuous tuning of the oscillation frequency from about 1 GHz up to tens of GHz. We believe such an oscillator may be useful as a compact on-chip microwave source suitable to control some types of qubits based on Josephson junctions.

DOI
10.1109/tasc.2023.3242214

Related papers

Hybrid Nb/MoGe Josephson Junctions for the Development of Flux-Flow-Type Josephson Oscillators

Ivan P. Nevirkovets

Josephson junctions (JJs) with layered Nb/MoGe electrodes were fabricated and characterized at 4.2 K. Mo0.75Ge0.25is known to be a superconductor with the transition temperature of up to 7.4 K. It is essentially an amorphous material that has very uniform and smooth surface in thin-film form. This allowed us to fabricate high-quality all-MoGe Josephson junctions with very thin Al overlayer to form AlOxbarrier [Supercond. Sci. Technol., vol. 35, Article no. 035008, 2022]. Here we report JJs with composite Nb/MoGe electrodes aiming at development of flux-flow-type Josephson oscillators operating at low frequencies suitable for qubit control. Using MoGe allows one to preserve a large effective magnetic penetration depth and a high kinetic inductance of the electrodes, which results in (i) a standing wave (Fiske) resonance to occur at lower frequencies, and (ii) in a higher impedance of the oscillator; the latter is important for matching it with other elements of the superconducting circuit. At the same time, using Nb as a part of the composite electrode allows one to maintain the critical parameters (critical current and voltage) of the JJ close to those of the Nb-based JJs. In addition, damping in hybrid Nb/MoGe JJs is lower than that in all-MoGe JJs, which results in a higher current of flux-flow steps, and potentially, in a higher microwave emission power.

IEEE Transactions on Applied Superconductivity•Dec 26, 2024•0 citations

DC-operated Josephson junction arrays as a cryogenic on-chip microwave measurement platform

Senne Vervoort, Lukas Nulens, Davi A. D. Chaves +8 more

Abstract Providing radio frequency (RF) signals to cryogenic circuits requires bulky and expensive cabling interfacing specialized RF electronics at room temperature. Superconducting-normal metal-superconducting Josephson junction arrays (JJAs) can change this paradigm by placing the RF source and detector on-chip. In this work, we demonstrate that DC-biased JJAs can emit signals in the C-band frequency spectrum and beyond, with a minimal linewidth of 106.5 ± 0.1 MHz and maximum power of 11.9 fW. We fabricate JJAs comprised of amorphous MoGe or NbTiN superconducting islands and metallic Au weak links. Temperature, magnetic field, applied current, and device design are explored to control the RF sources, while we identify important features that affect the ideal source behavior. Combined with the ability of these JJAs to detect microwave radiation, these sources allow us to propose a fully DC-operated cryogenic on-chip measurement platform that is an alternative to the high-frequency circuitry currently required for quantum applications.

arXiv:2412.17576•Communications Physics•Jul 12, 2025•4 citations

Superconducting Sub-Terahertz Oscillator with Continuous Frequency Tuning

Maxim E. Paramonov, Lyudmila V. Filippenko, Fedor V. Khan +2 more

The development and approbation of a superconducting local oscillator based on a long Josephson junction made it possible to create a fully superconducting integrated receiver in sub-terahertz frequency range, which was successfully tested both on board a high-altitude balloon and in the laboratory. In order to expand the frequency range of a superconducting integrated local oscillator, it is necessary to ensure the continuous tuning of its frequency at an arbitrary bias current, including a so-called resonant mode regime. The resonant mode regime takes place for high-quality tunnel junctions with low leakage; in this regime, stable generation is possible only at Fiske steps, the distance in frequency between which is tens of GHz. A method for suppressing resonances has been proposed and implemented; this method is based on the introduction of normal metal layers into the region near the long Josephson junction. Modeling of the propagation of electromagnetic waves in the proposed integrated structure was carried out; experimental samples were fabricated, and their comprehensive study was performed. The complete suppression of resonances and the possibility of the continuous tuning of the frequency of a superconducting local oscillator in the range of 200–700 GHz have been demonstrated. The linewidth of the FFO radiation does not exceed 15 MHz over the entire frequency range, which makes it possible to implement the phase locked loop mode in an integrated receiver intended for spectral studies.

Applied Sciences•Sep 5, 2022•2 citations

Shunted Josephson Junctions and Optimization of Niobium Integrated Matching Circuits

M. S. Shevchenko, Artemiy A. Atepalikhin, Fedor V. Khan +3 more

Josephson junctions (JJs) with non-hysteretic I-V characteristic and high critical parameters are required for many applications; in particular, they are needed to create tunable THz range oscillators. We fabricated and studied shunted superconductor-insulator-superconductor (SIS) Nb-AlOx-Nb tunnel junctions with an area of about 1μm2, estimated their parameters, and compared them with theoretical models. To assess the performance of shunted junctions in the terahertz range, their characteristics were studied under the influence of a high-frequency signal; the estimated value of the characteristic voltage for the shunted junction at a high frequency is about 1 mV. To improve the circuit parameters, a new type of the shunting based on application of NIS junctions was proposed, which reduces the influence of parasitic inductance, expands the frequency range of the generator, and decreases the size of the structure. The JJs with a new type of shunting have been fabricated and studied. The niobium integrated circuits intended for matching the superconducting oscillator and an SIS junction as a microwave detector were designed, fabricated, and tested. Such structures are required for studying the spectral characteristics and analyzing the operation of the oscillator. The developed circuits have demonstrated efficient operation at frequencies from 300 to 700 GHz; the experimental results are in good agreement with the simulated characteristics. The results obtained will be implemented for further development of the THz range oscillators.

IEEE Transactions on Applied Superconductivity•Nov 23, 2021•7 citations

Josephson Junctions with Ferromagnetic Interlayer

G. Wild

We report on the fabrication of superconductor/insulator/ferromagnetic metal/superconductor (Nb/AlOx/PdNi/Nb) π-Josephson junctions. An analysis of Fiske modes up to about 400 GHz provides information on the junction quality factor and the relevant damping mechanisms. High quality factors of up to 30 around 200 GHz have been achieved. They allow for the study of the dynamic properties of the junctions, in particular the switching probability from the zero-voltage into the voltage state with and without microwave irradiation. The experiments with microwave irradiation are well explained within semi-classical models and numerical simulations. At mK temperature, the switching dynamics without applied microwaves clearly shows secondary quantum effects. Here, we could observe for the first time macroscopic quantum tunneling in Josephson junctions with ferromagnetic interlayer.

•Jan 1, 2012•1 citation

A Voltage-Controlled Josephson Frequency Comb

Giorgio De Simoni, Francesco Giazotto

Microwave frequency combs constitute promising resources for quantum technologies, cryogenic electronics, and multiplexed sensing architectures. In this work, we propose a frequency-comb generator based on a Josephson field-effect transistor operated in a relaxation-oscillation regime. The device comprises a gate-tunable ballistic superconductor-semiconductor-superconductor junction embedded in a resistively shunted circuit, in which electrostatic control of the carrier density enables in situ tuning of both the critical current and the Josephson inductance. Time-domain circuit simulations indicate that the resulting oscillator produces coherent voltage pulses whose Fourier spectrum forms a microwave frequency comb. In contrast to conventional Josephson-based comb architectures, the proposed platform provides direct electrical control of the comb spacing, emission frequencies, and modal power distribution via a gate electrode. For a representative Al/InAs implementation, we demonstrate continuous frequency coverage in the technologically relevant 1-10 GHz range. Furthermore, the concept is shown to be compatible with higher-$T_c$ superconductors, underscoring its potential as a compact and scalable microwave source for cryogenic quantum information and sensing applications.

arXiv:2607.17992•Jul 20, 2026•0 citations
Thin films of amorphous MoxGe1-xgrown with magnetron sputtering are known to exhibit excellent homogeneity and fairly high superconducting transition temperatures (up to 7.5 K). These properties make MoGe thin films suitable to form high-quality tunnel junctions, as demonstrated recently by our group [see Supercond. Sci. Technol. 35, 035008 (2022)]. Here, we report the experimental demonstration of an MoGe/Al/AlOx/(Al)MoGe Josephson oscillator based on amorphous superconductor MoGe, which allows for continuous tuning of the oscillation frequency from about 1 GHz up to tens of GHz. We believe such an oscillator may be useful as a compact on-chip microwave source suitable to control some types of qubits based on Josephson junctions.
Josephson junctions (JJs) with layered Nb/MoGe electrodes were fabricated and characterized at 4.2 K. Mo0.75Ge0.25is known to be a superconductor with the transition temperature of up to 7.4 K. It is essentially an amorphous material that has very uniform and smooth surface in thin-film form. This allowed us to fabricate high-quality all-MoGe Josephson junctions with very thin Al overlayer to form AlOxbarrier [Supercond. Sci. Technol., vol. 35, Article no. 035008, 2022]. Here we report JJs with composite Nb/MoGe electrodes aiming at development of flux-flow-type Josephson oscillators operating at low frequencies suitable for qubit control. Using MoGe allows one to preserve a large effective magnetic penetration depth and a high kinetic inductance of the electrodes, which results in (i) a standing wave (Fiske) resonance to occur at lower frequencies, and (ii) in a higher impedance of the oscillator; the latter is important for matching it with other elements of the superconducting circuit. At the same time, using Nb as a part of the composite electrode allows one to maintain the critical parameters (critical current and voltage) of the JJ close to those of the Nb-based JJs. In addition, damping in hybrid Nb/MoGe JJs is lower than that in all-MoGe JJs, which results in a higher current of flux-flow steps, and potentially, in a higher microwave emission power.
Abstract Providing radio frequency (RF) signals to cryogenic circuits requires bulky and expensive cabling interfacing specialized RF electronics at room temperature. Superconducting-normal metal-superconducting Josephson junction arrays (JJAs) can change this paradigm by placing the RF source and detector on-chip. In this work, we demonstrate that DC-biased JJAs can emit signals in the C-band frequency spectrum and beyond, with a minimal linewidth of 106.5 ± 0.1 MHz and maximum power of 11.9 fW. We fabricate JJAs comprised of amorphous MoGe or NbTiN superconducting islands and metallic Au weak links. Temperature, magnetic field, applied current, and device design are explored to control the RF sources, while we identify important features that affect the ideal source behavior. Combined with the ability of these JJAs to detect microwave radiation, these sources allow us to propose a fully DC-operated cryogenic on-chip measurement platform that is an alternative to the high-frequency circuitry currently required for quantum applications.
The development and approbation of a superconducting local oscillator based on a long Josephson junction made it possible to create a fully superconducting integrated receiver in sub-terahertz frequency range, which was successfully tested both on board a high-altitude balloon and in the laboratory. In order to expand the frequency range of a superconducting integrated local oscillator, it is necessary to ensure the continuous tuning of its frequency at an arbitrary bias current, including a so-called resonant mode regime. The resonant mode regime takes place for high-quality tunnel junctions with low leakage; in this regime, stable generation is possible only at Fiske steps, the distance in frequency between which is tens of GHz. A method for suppressing resonances has been proposed and implemented; this method is based on the introduction of normal metal layers into the region near the long Josephson junction. Modeling of the propagation of electromagnetic waves in the proposed integrated structure was carried out; experimental samples were fabricated, and their comprehensive study was performed. The complete suppression of resonances and the possibility of the continuous tuning of the frequency of a superconducting local oscillator in the range of 200–700 GHz have been demonstrated. The linewidth of the FFO radiation does not exceed 15 MHz over the entire frequency range, which makes it possible to implement the phase locked loop mode in an integrated receiver intended for spectral studies.
Josephson junctions (JJs) with non-hysteretic I-V characteristic and high critical parameters are required for many applications; in particular, they are needed to create tunable THz range oscillators. We fabricated and studied shunted superconductor-insulator-superconductor (SIS) Nb-AlOx-Nb tunnel junctions with an area of about 1μm2, estimated their parameters, and compared them with theoretical models. To assess the performance of shunted junctions in the terahertz range, their characteristics were studied under the influence of a high-frequency signal; the estimated value of the characteristic voltage for the shunted junction at a high frequency is about 1 mV. To improve the circuit parameters, a new type of the shunting based on application of NIS junctions was proposed, which reduces the influence of parasitic inductance, expands the frequency range of the generator, and decreases the size of the structure. The JJs with a new type of shunting have been fabricated and studied. The niobium integrated circuits intended for matching the superconducting oscillator and an SIS junction as a microwave detector were designed, fabricated, and tested. Such structures are required for studying the spectral characteristics and analyzing the operation of the oscillator. The developed circuits have demonstrated efficient operation at frequencies from 300 to 700 GHz; the experimental results are in good agreement with the simulated characteristics. The results obtained will be implemented for further development of the THz range oscillators.
We report on the fabrication of superconductor/insulator/ferromagnetic metal/superconductor (Nb/AlOx/PdNi/Nb) π-Josephson junctions. An analysis of Fiske modes up to about 400 GHz provides information on the junction quality factor and the relevant damping mechanisms. High quality factors of up to 30 around 200 GHz have been achieved. They allow for the study of the dynamic properties of the junctions, in particular the switching probability from the zero-voltage into the voltage state with and without microwave irradiation. The experiments with microwave irradiation are well explained within semi-classical models and numerical simulations. At mK temperature, the switching dynamics without applied microwaves clearly shows secondary quantum effects. Here, we could observe for the first time macroscopic quantum tunneling in Josephson junctions with ferromagnetic interlayer.
Microwave frequency combs constitute promising resources for quantum technologies, cryogenic electronics, and multiplexed sensing architectures. In this work, we propose a frequency-comb generator based on a Josephson field-effect transistor operated in a relaxation-oscillation regime. The device comprises a gate-tunable ballistic superconductor-semiconductor-superconductor junction embedded in a resistively shunted circuit, in which electrostatic control of the carrier density enables in situ tuning of both the critical current and the Josephson inductance. Time-domain circuit simulations indicate that the resulting oscillator produces coherent voltage pulses whose Fourier spectrum forms a microwave frequency comb. In contrast to conventional Josephson-based comb architectures, the proposed platform provides direct electrical control of the comb spacing, emission frequencies, and modal power distribution via a gate electrode. For a representative Al/InAs implementation, we demonstrate continuous frequency coverage in the technologically relevant 1-10 GHz range. Furthermore, the concept is shown to be compatible with higher-TcT_cTc​ superconductors, underscoring its potential as a compact and scalable microwave source for cryogenic quantum information and sensing applications.