Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Optical Technology

Integrated optical waveguides for quantum photon gates at a wavelength of 810 nm

V. M. Petrov, Mikhail V. Parfenov, Aleksandr V. Tronev, Daniil D. Reshetnikov, Igor V. Il'ichev

Published Jun 1, 2024• 0 citations
Publisher

Abstract

Subject of study. The optical losses in waveguides designed for creating quantum photon gates at a wavelength of 810 nm were investigated. Aim of study. The aim of the study was to create integrated optical single-mode waveguides for quantum photon gates at a wavelength of 810 nm and to estimate optical losses acceptable for maintaining the necessary degree of photon-pair entanglement. Method. The waveguides were manufactured through thermal diffusion of titanium ions into a substrate composed of an X-slice of nominally pure lithium niobate (LiNbO3). Optical losses were estimated by experimentally measuring the loss per unit length of the waveguide. Optical radiation was coupled into and out of the waveguide using fiber segments, with one end connected and the other cleaved. A drop of immersion liquid was applied between the cleaved fiber and waveguide end, and measurements were performed for both polarization modes. Main results. Six groups of samples were produced, each containing waveguides with strip widths of d=3.0, 2.0, and 1.5 µm. The measured optical losses in the manufactured waveguides indicated that those with a titanium strip width of d≈3 µm exhibited the lowest losses. The estimated minimum optical losses for transverse magnetic and transverse electric polarization were approximately 0.20–0.25 and 0.1 dB/cm, respectively. Practical significance. The waveguides manufactured with a strip width of approximately 3 µm can be used to create quantum photonic gates in an integrated optical design. The chosen wavelength of 810 nm offers potential for near-future development of photonic gates, as one of the most accessible methods for generating entangled photon pairs involves using a 405-nm laser followed by wavelength doubling through a nonlinear beta-barium borate crystal.

DOI
10.1364/jot.91.000405

Related papers

The generation of polarization-entangled photon pairs using grating structures of Ti-diffused Lithium Niobate waveguides in integrated optics

Shamsolah Salemian, Shahram Mohammadnejad

an entangled photon source is an essential tool for quantum information experiments, such as tests of Bell inequalities, quantum teleportation and entanglement swapping. We report the generation of polarization-entangled photon pairs using grating structures of nonlinear materials such as Tidiffused lithium niobate. This approach is useful for quantum integrated optics because the size of this element is less than 325 micron. Polarizationentangled photon pairs are created using the nonlinear optical process of type-II spontaneous parametric down-conversion. The pump laser at 800 nm was doubled to a wavelength of 400 nm, which was used to produce SPDC in the grating structure of Lithium Niobate. The photon pairs were generated at wavelengths 692nm and 950nm.

International Conference on Applied Electronics•Jan 1, 2009•0 citations

THE GENERATION OF POLARIZATION-ENTANGLED PHOTON PAIRS USING GRATING STRUCTURES OF Ti -DIFFUSED LITHIUM NIOBATE WAVEGUIDES IN INTEGRATED OPTICS

Shamsolah Salemian, Shahram Mohammadnejad

Entangled photon source is an essential tool for quantum information experiments, such as tests of Bell inequalities, quantum teleportation, and entanglement swapping. We report the generation of polarization-entangled photon pairs using grating structures of nonlinear materials such as Ti -diffused Lithium Niobate. This approach is useful for quantum integrated optics because the size of this element is less than 325 micron. Polarization-entangled photon pairs are created using the nonlinear optical process of type-II spontaneous parametric down-conversion. The pump laser at 800 nm was doubled to a wavelength of 400 nm, which was used to produce SPDC in the grating structure of Lithium Niobate. The entangled photon pairs were generated at wavelengths 692 nm and 950 nm. The used grating structure consists of two sections. Grating period and length of the first section are 162 nm and 129.6 micron, respectively. Grating period of the second section is 193 nm and its length is equal to 193 micron.

Journal of Circuits Systems and Computers•May 1, 2012•0 citations

A highly efficient integrated two-color source for heralded single photons

Stephan Krapick, Harald Herrmann, Benjamin Brecht +3 more

Summary form only given. Recent progress in quantum information processing has highlighted the benefits of integrated optic devices for quantum applications (e.g.[l]). The miniaturization of systems with increased complexity drastically reduces the required space and paves the way for future commercialization.In the past five years, several groups have demonstrated promising approaches to achieve quantum interference and photonic gates on-chip (e.g.[2]). However, in all of these experiments the preparation of the photon pairs has been performed outside the integrated devices employing bulk crystal parametric down-conversion (PDC) sources, while the efficient coupling between these sources and the integrated circuit remains as a bottleneck for the design of systems with increasing complexity. On the other hand remarkable efforts have been devoted to the development of integrated PDC sources for photon pair generation inside channel waveguides [3]. The main benefits of guided-wave PDC processes include high conversion efficiencies and spatial mode control. We combine the prospects of an efficient type-I PDC source based on Titanium-indiffused periodically poled Z-cut Lithium Niobate waveguides (Ti:PPLN) with a passive wavelength division demultiplexing coupler on-chip, shown in Figure 1. The coupler allows for excellent spatial separation generated photon pairs. The non-degenerate decay of pump photons at 532 nm into signal and idler photons provides us with a photon pair at wavelengths of 1575 nm and 800 nm, respectively. Thus low-loss fiber transmission of the prepared states at 1575 nm can be accomplished on the one hand, while on the other hand efficient heralding of conditioned states can be implemented with off-the-shelf silicon-based detectors. The quality and efficiency of our source was improved by the deposition of endface-coatings. This allows for the efficient launching of pump light into the waveguide and it simultaneously provides a close-toperfect transmission of signal and idler at the output of our source, reflecting the pump light by more than 99%. In conditioned coincidence measurements in the picosecond pulsed regime we achieved heralding of single photons with almost no influence of background radiation, expressed by high coincidences-toaccidentals ratios up to CAR > 7400. The preparation exceeded 60% of efficiency in the low pump power regime, accompanied with ultra-low second-order correlation functions of g(2) (0) <; 4.10-3. These figures of merit in conjunction with the integration of active and passive elements make our source a candidate for a basic building block in more complex and miniaturized quantum network realizations in the future.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•2 citations

Highly efficient polarization-entangled photon-pair generation in lithium niobate waveguides based on bound states in continuum

G. Y. Chen, Z. X. Li, Y. H. Chen +1 more

Integrated optics provides a platform for the experimental implementation of highly complex and compact circuits for practical applications as well as for advances in the fundamental science of quantum optics. The lithium niobate (LN) waveguide is an important candidate for the construction of integrated optical circuits. Based on the bound state in the continuum (BIC) in a LN waveguide, we propose an efficient way to produce polarization-entangled photon pairs. The implementation of this method is simple and does not require the polarization process needed for periodically poled LN. The generation rate of the entangled photon pairs increases linearly with the length of the waveguide. For visible light, the generation efficiency can be improved by more than five orders of magnitude with waveguides having the length of only a few millimeters, compared with the corresponding case without BICs. The phenomena can appear in a very wide spectrum range from the visible to THz regions. This study is of great significance for the development of active integrated quantum chips in various wavelength ranges.

arXiv:2103.05323•Optics Express•Mar 23, 2021•11 citations

Integrated optical source of polarization entangled photons at 1310 nm

Anthony Martin, V. Cristofori, P. Aboussouan +5 more

We report the realization of a new polarization entangled photon-pair source based on a titanium-indiffused waveguide integrated on periodically poled lithium niobate pumped by a CW laser at 655 nm. The paired photons are emitted at the telecom wavelength of 1310 nm within a bandwidth of 0.7 nm. The quantum properties of the pairs are measured using a two-photon coalescence experiment showing a visibility of 85%. The evaluated source brightness, on the order of 10(5) pairs s(-1)GHz(-1)mW(-1), associated with its compactness and reliability, demonstrates the source's high potential for long-distance quantum communication.

arXiv:0901.2815•Optics Express•Jan 15, 2009•47 citations

Versatile integrated source of entangled photons at telecom wavelength in femtosecond-laser-written circuits (Conference Presentation)

Simone Atzeni, Giacomo Corrielli, Andrea Crespi +7 more

Entangled photons generation is an interesting field of research, since progress in this area will directly affect the development of photonic quantum technologies, including quantum computing, simulation and sensing. Several methods have been sifted to increase the performances of entangled photon sources and the integrated optics approach represents a promising strategy. In particular, integrated waveguide sources represent a robust tool, thanks to their stability and the enhancement of nonlinear light-crystal interaction provided by waveguide field confinement. Here, we show the versatility of a hybrid approach, realizing an integrated optical source for the generation of entangled photon-pairs at telecom wavelength. The nonlinear active medium used is lithium niobate, while the routing and manipulation of the generated signal is performed in aluminum-borosilicate glass photonic circuits. The system is composed of three cascaded devices. First, a balanced directional coupler at the fundamental wavelength equally splits the pump in the lithium niobate waveguides, which generate single-photon pairs through type 0 spontaneous parametric down-conversion process. A third chip, encompassing directional couplers and waveplates, closes the interferometer and recombines the generated photons, thus giving access to different quantum states of light: path-entangled or polarization-entangled states. A thermal phase shifter, which controls the relative phase between the interferometer arms, gives an additional degree of freedom for engineering the output state of the presented photon pairs source. All these components are entirely fabricated by femtosecond laser micromachining, a direct and very versatile technique that allows to process different kind of materials and realize high quality optical circuits.

Quantum Computing, Communication, and Simulation•Mar 14, 2018•0 citations
Subject of study. The optical losses in waveguides designed for creating quantum photon gates at a wavelength of 810 nm were investigated. Aim of study. The aim of the study was to create integrated optical single-mode waveguides for quantum photon gates at a wavelength of 810 nm and to estimate optical losses acceptable for maintaining the necessary degree of photon-pair entanglement. Method. The waveguides were manufactured through thermal diffusion of titanium ions into a substrate composed of an X-slice of nominally pure lithium niobate (LiNbO3). Optical losses were estimated by experimentally measuring the loss per unit length of the waveguide. Optical radiation was coupled into and out of the waveguide using fiber segments, with one end connected and the other cleaved. A drop of immersion liquid was applied between the cleaved fiber and waveguide end, and measurements were performed for both polarization modes. Main results. Six groups of samples were produced, each containing waveguides with strip widths of d=3.0, 2.0, and 1.5 µm. The measured optical losses in the manufactured waveguides indicated that those with a titanium strip width of d≈3 µm exhibited the lowest losses. The estimated minimum optical losses for transverse magnetic and transverse electric polarization were approximately 0.20–0.25 and 0.1 dB/cm, respectively. Practical significance. The waveguides manufactured with a strip width of approximately 3 µm can be used to create quantum photonic gates in an integrated optical design. The chosen wavelength of 810 nm offers potential for near-future development of photonic gates, as one of the most accessible methods for generating entangled photon pairs involves using a 405-nm laser followed by wavelength doubling through a nonlinear beta-barium borate crystal.
an entangled photon source is an essential tool for quantum information experiments, such as tests of Bell inequalities, quantum teleportation and entanglement swapping. We report the generation of polarization-entangled photon pairs using grating structures of nonlinear materials such as Tidiffused lithium niobate. This approach is useful for quantum integrated optics because the size of this element is less than 325 micron. Polarizationentangled photon pairs are created using the nonlinear optical process of type-II spontaneous parametric down-conversion. The pump laser at 800 nm was doubled to a wavelength of 400 nm, which was used to produce SPDC in the grating structure of Lithium Niobate. The photon pairs were generated at wavelengths 692nm and 950nm.
Entangled photon source is an essential tool for quantum information experiments, such as tests of Bell inequalities, quantum teleportation, and entanglement swapping. We report the generation of polarization-entangled photon pairs using grating structures of nonlinear materials such as Ti -diffused Lithium Niobate. This approach is useful for quantum integrated optics because the size of this element is less than 325 micron. Polarization-entangled photon pairs are created using the nonlinear optical process of type-II spontaneous parametric down-conversion. The pump laser at 800 nm was doubled to a wavelength of 400 nm, which was used to produce SPDC in the grating structure of Lithium Niobate. The entangled photon pairs were generated at wavelengths 692 nm and 950 nm. The used grating structure consists of two sections. Grating period and length of the first section are 162 nm and 129.6 micron, respectively. Grating period of the second section is 193 nm and its length is equal to 193 micron.
Summary form only given. Recent progress in quantum information processing has highlighted the benefits of integrated optic devices for quantum applications (e.g.[l]). The miniaturization of systems with increased complexity drastically reduces the required space and paves the way for future commercialization.In the past five years, several groups have demonstrated promising approaches to achieve quantum interference and photonic gates on-chip (e.g.[2]). However, in all of these experiments the preparation of the photon pairs has been performed outside the integrated devices employing bulk crystal parametric down-conversion (PDC) sources, while the efficient coupling between these sources and the integrated circuit remains as a bottleneck for the design of systems with increasing complexity. On the other hand remarkable efforts have been devoted to the development of integrated PDC sources for photon pair generation inside channel waveguides [3]. The main benefits of guided-wave PDC processes include high conversion efficiencies and spatial mode control. We combine the prospects of an efficient type-I PDC source based on Titanium-indiffused periodically poled Z-cut Lithium Niobate waveguides (Ti:PPLN) with a passive wavelength division demultiplexing coupler on-chip, shown in Figure 1. The coupler allows for excellent spatial separation generated photon pairs. The non-degenerate decay of pump photons at 532 nm into signal and idler photons provides us with a photon pair at wavelengths of 1575 nm and 800 nm, respectively. Thus low-loss fiber transmission of the prepared states at 1575 nm can be accomplished on the one hand, while on the other hand efficient heralding of conditioned states can be implemented with off-the-shelf silicon-based detectors. The quality and efficiency of our source was improved by the deposition of endface-coatings. This allows for the efficient launching of pump light into the waveguide and it simultaneously provides a close-toperfect transmission of signal and idler at the output of our source, reflecting the pump light by more than 99%. In conditioned coincidence measurements in the picosecond pulsed regime we achieved heralding of single photons with almost no influence of background radiation, expressed by high coincidences-toaccidentals ratios up to CAR > 7400. The preparation exceeded 60% of efficiency in the low pump power regime, accompanied with ultra-low second-order correlation functions of g(2) (0) <; 4.10-3. These figures of merit in conjunction with the integration of active and passive elements make our source a candidate for a basic building block in more complex and miniaturized quantum network realizations in the future.
Integrated optics provides a platform for the experimental implementation of highly complex and compact circuits for practical applications as well as for advances in the fundamental science of quantum optics. The lithium niobate (LN) waveguide is an important candidate for the construction of integrated optical circuits. Based on the bound state in the continuum (BIC) in a LN waveguide, we propose an efficient way to produce polarization-entangled photon pairs. The implementation of this method is simple and does not require the polarization process needed for periodically poled LN. The generation rate of the entangled photon pairs increases linearly with the length of the waveguide. For visible light, the generation efficiency can be improved by more than five orders of magnitude with waveguides having the length of only a few millimeters, compared with the corresponding case without BICs. The phenomena can appear in a very wide spectrum range from the visible to THz regions. This study is of great significance for the development of active integrated quantum chips in various wavelength ranges.
We report the realization of a new polarization entangled photon-pair source based on a titanium-indiffused waveguide integrated on periodically poled lithium niobate pumped by a CW laser at 655 nm. The paired photons are emitted at the telecom wavelength of 1310 nm within a bandwidth of 0.7 nm. The quantum properties of the pairs are measured using a two-photon coalescence experiment showing a visibility of 85%. The evaluated source brightness, on the order of 10(5) pairs s(-1)GHz(-1)mW(-1), associated with its compactness and reliability, demonstrates the source's high potential for long-distance quantum communication.
Entangled photons generation is an interesting field of research, since progress in this area will directly affect the development of photonic quantum technologies, including quantum computing, simulation and sensing. Several methods have been sifted to increase the performances of entangled photon sources and the integrated optics approach represents a promising strategy. In particular, integrated waveguide sources represent a robust tool, thanks to their stability and the enhancement of nonlinear light-crystal interaction provided by waveguide field confinement. Here, we show the versatility of a hybrid approach, realizing an integrated optical source for the generation of entangled photon-pairs at telecom wavelength. The nonlinear active medium used is lithium niobate, while the routing and manipulation of the generated signal is performed in aluminum-borosilicate glass photonic circuits. The system is composed of three cascaded devices. First, a balanced directional coupler at the fundamental wavelength equally splits the pump in the lithium niobate waveguides, which generate single-photon pairs through type 0 spontaneous parametric down-conversion process. A third chip, encompassing directional couplers and waveplates, closes the interferometer and recombines the generated photons, thus giving access to different quantum states of light: path-entangled or polarization-entangled states. A thermal phase shifter, which controls the relative phase between the interferometer arms, gives an additional degree of freedom for engineering the output state of the presented photon pairs source. All these components are entirely fabricated by femtosecond laser micromachining, a direct and very versatile technique that allows to process different kind of materials and realize high quality optical circuits.