Communications Physics

Pseudospin-polarized slow light waveguides with large delay-bandwidth product

Fu‐Long Shi, Xiao‐Dong Chen, Wen-Jie Chen, Jian‐Wen Dong

Published Nov 3, 2024• 3 citations

Abstract

Delay-bandwidth product (DBP) is a key metric in slow light waveguides, requiring a balance between a large group index and broad bandwidth—two parameters that often involve a trade-off. Here, we propose and demonstrate a slow light waveguide with large DBP using a pseudospin-polarized transverse electromagnetic mode. This waveguide features a folded edge configuration that supports a 200% relative bandwidth from quasistatic limit (zero frequency) and an arbitrarily large group index. Owing to the pseudospin-polarized design, the dense folding would not introduce backscattering and the associated group velocity dispersion (GVD). The resulting gapless linear dispersion and pulse transmission behavior in folded edge waveguide are observed in microwave experiments. Our scheme provides a way to overcome the trade-off between group index and working bandwidth in slow light waveguide, which has potential applications in broadband optical buffering, light-matter interaction enhancement, terahertz radiation source and time domain processing. Delay-bandwidth product (DBP), which require a large group index and a wide bandwidth, is an important indicator in slow light waveguides. This work relaxes the trade-off between group velocity and working bandwidth in 200% relative bandwidth, and realizes a pseudospin-polarized slow-light waveguide with large DBP and low group velocity dispersion.

DOI: 10.1038/s42005-024-01853-w

Related papers

Dispersion-controlled slow light in photonic crystal waveguides

Toshihiko Baba, Jun ADACHI, Norihiro Ishikura +4 more

Slow light with a markedly low group velocity is a promising solution for optical buffering and advanced time-domain optical signal processing. It is also anticipated to enhance linear and nonlinear effects and so miniaturize functional photonic devices because slow light compresses optical energy in space. Photonic crystal waveguide devices generate on-chip slow light at room temperature with a wide bandwidth and low dispersion suitable for short pulse transmission. This paper first explains the delay-bandwidth product, fractional delay, and tunability as crucial criteria for buffering capacity of slow light devices. Then the paper describes experimental observations of slow light pulse, exhibiting their record high values. It also demonstrates the nonlinear enhancement based on slow light pulse transmission.

Proceedings of the Japan Academy Series BJan 1, 200928 citations

Review dispersion-controlled slow light in photonic crystal waveguides

Baba, Toshihiko, Adachi, Jun, Ishikura, Norihiro +4 more

Jan 1, 20090 citations

Slow-light optical buffers: capabilities and fundamental limitations

R.S. Tucker, C. C. Kuo, Connie J. Chang-Hasnain

This paper presents an analysis of optical buffers based on slow-light optical delay lines. The focus of this paper is on slow-light delay lines in which the group velocity is reduced using linear processes, including electromagnetically induced transparency (EIT), population oscillations (POs), and microresonator-based photonic-crystal (PC) filters. We also consider slow-light delay lines in which the group velocity is reduced by an adiabatic process of bandwidth compression. A framework is developed for comparing these techniques and identifying fundamental physical limitations of linear slow-light technologies. It is shown that slow-light delay lines have limited capacity and delay-bandwidth product. In principle, the group velocity in slow-light delay lines can be made to approach zero. But very slow group velocity always comes at the cost of very low bandwidth or throughput. In many applications, miniaturization of the delay line is an important consideration. For all delay-line buffers, the minimum physical size of the buffer for a given number of buffered data bits is ultimately limited by the physical size of each stored bit. We show that in slow-light optical buffers, the minimum achievable size of 1 b is approximately equal to the wavelength of light in the buffer. We also compare the capabilities and limitations of a range of delay-line buffers, investigate the impact of waveguide losses on the buffer capacity, and look at the applicability of slow-light delay lines in a number of applications.

Journal of Lightwave TechnologyDec 1, 2005527 citations

Dispersion-Controlled Slow Light in Photonic Crystal Waveguides

Toshihiko Baba, Hirokazu Sasaki, J. Adachi +4 more

Slow light with a markedly low group velocity is a promising solution for optical buering and advanced time-domain optical signal processing.It is also anticipated to enhance linear and nonlinear eects and so miniaturize functional photonic devices because slow light compresses optical energy in space.Photonic crystal waveguide devices generate on-chip slow light at room temperature with a wide bandwidth and low dispersion suitable for short pulse transmission.This paper rst explains the delay-bandwidth product, fractional delay, and tunability as crucial criteria for buering capacity of slow light devices.Then the paper describes experimental observations of slow light pulse, exhibiting their record high values.It also demonstrates the nonlinear enhancement based on slow light pulse transmission.

Advances in Optical Sciences CongressJan 1, 20092 citations

Slow Light Gap Solitons

Jacob B. Khurgin, R.S. Tucker

One of the key issues when dealing with slow light is the inevitable effect of dispersion, the result of which is to broaden a pulse upon propagation. Moreover, the dispersion tends to increase when the group velocity, the speed at which the pulse propagates, decreases. To see this, we note that if we write the group velocity vg ≡ c/ng, where ng is the group index, then we find that ng = n+ωdn/dω. Since for the materials we are interested in, the refractive index does not vary strongly in magnitude, and slow light is obtained when the derivative dn/dω is large and positive. However, as the variations in the magnitude of n itself are limited, the large derivative can only be maintained over a narrow bandwidth ∝ (dn/dω)−1. Therefore, a large delay implies a narrow bandwidth, and hence a limited pulse width. Here we discuss how to avoid this limit by using nonlinear effects in the form of gap solitons. Though this argument is quite simple, it can be made rigorous using the Kramers-Kronig relations. In this way it can be shown that the achievable delay in a linear, two-port device is subject to a limitation of the product of the delay and the bandwidth (Lenz et al., 2001).

CRC Press eBooksOct 8, 20180 citations

Discretely tunable optical packet delays using channelized slow light

Zhimin Shi, Robert W. Boyd

We describe a procedure for increasing the fractional delay (or delay-bandwidth product) of a slow-light system. A broadband input signal is sliced into several frequency bands. The light in each band propagates through a separate channel which possesses a highly reduced group velocity over a narrow frequency band. The output of each channel is then combined to form a single output field. For certain discretely distributed values of the group velocity of each channel, the output can replicate the input waveform without the need to adjust the output phase of each channel. Because this scheme makes use of many parallel channels, it can overcome a fundamental limit [D. A. B. Miller, Phys. Rev. Lett. 99, 203903 (2007)] to the delay-bandwidth product for single-channel devices. A practical design is proposed using spectral slicers and stimulated Brillouin scattering as the narrow-band slow-light process. Numerical simulation shows that such a channelized slow-light element can have nearly uniform gain and group index over very large bandwidths.

Physical Review AJan 6, 200917 citations