Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Quantum Technology

A methodology to select and adjust quantum noise models through emulators: benchmarking against real backends

J.A. Bravo-Montes, Miriam Bastante, Guillermo Botella, Alberto Antonio Del Barrio, Francisco García-Herrero

Published Oct 22, 2024• 18 citations
Publisher

Abstract

Currently, access to quantum processors is costly in terms of time, and power. There are quantum simulators and emulators on the market that offer alternatives for evaluating the behavior of a real quantum processor. However, these emulation environments present accuracy deviations from real devices, mainly because of difficult-to-model error sources. In this study, a methodology is proposed that allows the selection of noise models and adjustment of their parameters, considering the nature of the backends (technology, topology, vendor, model, etc.). The proposed methodology is illustrated using a small superconducting example based on the ibm_perth backend (seven qubits) and a comparison between the quantum emulators Qaptiva and Qiskit , where six different noise models are applied, achieving a fidelity deviation of 0.686% at best with respect to the real device.

DOI
10.1140/epjqt/s40507-024-00284-4

Related papers

Simulation and Benchmarking of Real Quantum Hardware

Tomislav Piskor, Marius Schöndorf, Michael Bauer +5 more

Abstract The effects of noise are one of the most important factors to consider when it comes to quantum computing in the noisy intermediate-scale quantum computing (NISQ) era that we are currently in. Therefore, it is important not only to gain more knowledge about the noise sources appearing in current quantum computing hardware in order to suppress and mitigate their contributions, but also to evaluate whether a given quantum algorithm can achieve reasonable results on a given hardware. To accomplish this, we need noise models that can describe the real hardware with sufficient accuracy. Here, we present a noise model that has been evaluated on superconducting hardware platforms and could be adapted to other common architectures such as trapped-ion or neutral atom devices. We then benchmark our model by simulating a 20-qubit superconducting quantum computer, and compare the accuracy of our model to similar approaches from the literature and demonstrate an improvement in the overall prediction accuracy.

arXiv:2508.04483•Oct 27, 2025•7 citations

Computational Modeling of Quantum Noise and Decoherence

Andreas Popescu, Elena Horvath, Eva Hansen

Quantum noise and decoherence are the primary barriers to realising fault-tolerant quantum computation on near-term hardware. Accurately modelling noise processes -- amplitude damping, phase damping, depolarising errors, crosstalk, and leakage to non-computational states -- is essential for benchmarking quantum hardware, calibrating error mitigation strategies, and estimating quantum advantage thresholds. This paper proposes the Quantum Noise Computational Model (QNCM) framework, a systematic evaluation of seven noise modelling approaches -- Lindblad master equation, Kraus operator formalism, stochastic Schrodinger equation, randomised benchmarking models, process tomography, Pauli noise models, and coherent error models -- across 24 quantum hardware calibration datasets from IBM Quantum, Google Sycamore, and IonQ Aria processors. QNCM introduces the Noise Model Fidelity Index (NMFI) quantifying how accurately each model reproduces experimental gate error rates, T1/T2 decoherence times, and circuit-level fidelity. Key results: Lindblad master equation achieves NMFI = 0.924 (highest accuracy); Pauli noise models achieve NMFI = 0.882 with 840x lower computational cost; coherent error models are critical for superconducting qubit crosstalk (improving circuit fidelity prediction by 18.4%). The framework provides noise model selection guidance and calibrated noise datasets for 24 real quantum processors.

Quantum Frontiers Journal•Jul 22, 2025•0 citations

Practical Guide to Quantum Computing: Building Noise Models with IBM Quantum Simulators # 4

Mikhail Pavlov

Abstract This practical guide presents methods for constructing noise models using the Qiskit Aer noise module within the IBM Q ecosystem. The objective is to simulate quantum circuits under realistic error conditions, enabling accurate emulation of noisy quantum processors. The guide demonstrates how to: Use the Qiskit Aer noise module to define custom noise models. Incorporate gate errors, readout errors, and decoherence effects into simulations. Apply noise channels (e.g., depolarizing, amplitude damping, phase damping). Attach noise models to quantum circuit simulations. Analyze how noise affects algorithm performance and output distributions. Building noise models is essential for studying the behavior of quantum algorithms in the NISQ (Noisy Intermediate-Scale Quantum) era. It allows researchers to evaluate algorithm robustness, optimize circuit depth, and test error mitigation strategies before execution on real IBM Quantum hardware. This approach provides a bridge between ideal theoretical circuits and physically realistic quantum devices, enhancing the reliability and applicability of quantum computing experiments.

•Mar 4, 2026•0 citations

Constructing and Benchmarking Noise Models for Quantum Computing

Tom Weber

Context: The main obstacle of quantum computing on its way to scalability is the noisy nature of current hardware. Various types of errors lead to incorrect computational results,and measures such as quantum error mitigation are needed to counteract these errors. Many error mitigation techniques require a thorough understanding of the noise and its impact on computations. Therefore, accurate noise models are indispensable to facilitate meaningful quantum computing in the near future. They also enable realistic simulations of quantum devices. Since these devices are currently limited and quantum computing is expensive, researchers typically rely on simulations for testing their algorithms.Objective: In this thesis, we aim to construct a realistic noise model for quantum computing and optimise its model parameters. The model construction should build on the underlying physical processes, and the number of parameters should scale well with the system size. We also address the evaluation and comparison of different noise models by benchmarks using quantum circuits specific to real-world applications. Finally, we aim to develop useful graphical representations of noise models based on the existing quantum circuit model.Method: We present a benchmarking framework for quantum computing noise models and evaluate it based on benchmarking quality attributes from the literature. Moreover, we construct a quantum computing noise model and develop a training procedure for its parameters. We analyse the parameters of the trained noise model and the impact ofdifferent types of errors on computations. We benchmark the noise model with the above approach and compare it to a noise model provided by IBM’s software development kit Qiskit. Finally, we develop an extension of the quantum circuit model to represent noise channels.Result: The benchmarks performed in this thesis show that our noise model predicts noisy hardware behaviour of IBM’s ibmq_manila quantum device equally well as the Qiskit model, if not better, based on quantum circuits commonly used for variational quantum algorithms. Within the trained noise model, readout error has the most detrimental impact on computations. Our benchmarking approach satisfies relevant quality criteria by choosing suitable quantum circuits and objective functions to compare model predictionsto hardware data. Moreover, the quantum circuit model can be extended meaningfully by noise channels.Conclusion: Our benchmarking approach is suitable for evaluating and comparing quantum computing noise models. In future work, volumetric benchmarks should be performed for various noise models and application contexts. The parameter optimisation based on learning with training circuits yields accurate noise models and shows the importance of mitigating measurement error. Different optimisation algorithms and quantum circuits should be explored, and more types of noise should be incorporated into the noise model.

•Jan 12, 2026•0 citations

Design of a hybrid quantum machine learning architecture and analysis of quantum noise effects

J.A. Bravo-Montes, Alonso Martin-Toledano, Christian Velasco-Gallego +3 more

Quantum Machine Learning (QML) is emerging as a promising technology for tackling complex computational challenges, although its practical implementation faces significant obstacles owed to the inherent noise in current quantum devices. This paper presents a hybrid architecture that combines classical and quantum elements for the development and training of QML models under noisy conditions. This research evaluates the impact of noise on superconducting systems through emulation. The study shows that, compared to noise-free configurations, certain noise levels tend to allow for a reduction in the number of qubits, thus simplifying the architecture of the quantum neural network, which has a direct impact on the computational cost and execution times. Experimental validation was performed by applying three biomedical datasets related to breast cancer detection. The experimental findings revealed that the variations in accuracy between noiseless configurations and those subjected to noisy conditions were minimal, with deviations ranging from 0.11% to 1.68%. Additionally, it was observed that the incorporation of noise during training contributed positively to the efficiency of the process for the datasets under test, achieving improvements in training execution times ranging from a factor of 1.61 to 4.39, when the proposed architecture was emulated on Qaptiva 802.

Scientific Reports•Mar 14, 2026•1 citation

Q-DICE: Quantum Distributed Interconnect Compiler and Emulator

Michael Silver, Zachary Vernec, Hans-Arno Jacobsen

As distributed quantum computing (DQC) offers a leading path towards scalable quantum computation, the ability to benchmark distributed algorithms under realistic conditions becomes critical for system co-design. However, without access to physical systems, researchers lack tools to evaluate distribution protocols. We introduce Q-DICE (Quantum Distributed Interconnect Compiler and Emulator), a hardware-aware emulation environment for benchmarking distributed quantum circuits on classical simulators and on NISQ-era monolithic hardware. This work provides three core contributions: (1) a programmatic scheme to construct distributed QPU backends, utilizing two novel techniques - QPU slicing and stitching - to facilitate distributed circuit mapping, (2) a methodology for modeling nonlocal link noise using physically motivated Kraus operators and stochastic error channels, and (3) a boundary-aware circuit mapping algorithm enforcing distributed QPU topology constraints during transpilation. Together, these components constitute a distribution-aware compiler and noise-modeling engine that faithfully enforces the physical limitations of distributed quantum hardware within existing execution environments. We validate Q-DICE against a multitude of experimentally demonstrated quantum circuits, including a distributed Grover's search on optically linked trapped-ion hardware, achieving a worst-case fidelity deviation of 4% between simulated and experimental results. These findings demonstrate Q-DICE's capacity to accurately reproduce real distributed quantum system behavior across platforms, streamlining experimentation with distributed quantum algorithms and architectures.

quant-pharXiv:2606.11340•Jun 11, 2026•1 citation
Currently, access to quantum processors is costly in terms of time, and power. There are quantum simulators and emulators on the market that offer alternatives for evaluating the behavior of a real quantum processor. However, these emulation environments present accuracy deviations from real devices, mainly because of difficult-to-model error sources. In this study, a methodology is proposed that allows the selection of noise models and adjustment of their parameters, considering the nature of the backends (technology, topology, vendor, model, etc.). The proposed methodology is illustrated using a small superconducting example based on the ibm_perth backend (seven qubits) and a comparison between the quantum emulators Qaptiva and Qiskit , where six different noise models are applied, achieving a fidelity deviation of 0.686% at best with respect to the real device.
Abstract The effects of noise are one of the most important factors to consider when it comes to quantum computing in the noisy intermediate-scale quantum computing (NISQ) era that we are currently in. Therefore, it is important not only to gain more knowledge about the noise sources appearing in current quantum computing hardware in order to suppress and mitigate their contributions, but also to evaluate whether a given quantum algorithm can achieve reasonable results on a given hardware. To accomplish this, we need noise models that can describe the real hardware with sufficient accuracy. Here, we present a noise model that has been evaluated on superconducting hardware platforms and could be adapted to other common architectures such as trapped-ion or neutral atom devices. We then benchmark our model by simulating a 20-qubit superconducting quantum computer, and compare the accuracy of our model to similar approaches from the literature and demonstrate an improvement in the overall prediction accuracy.
Quantum noise and decoherence are the primary barriers to realising fault-tolerant quantum computation on near-term hardware. Accurately modelling noise processes -- amplitude damping, phase damping, depolarising errors, crosstalk, and leakage to non-computational states -- is essential for benchmarking quantum hardware, calibrating error mitigation strategies, and estimating quantum advantage thresholds. This paper proposes the Quantum Noise Computational Model (QNCM) framework, a systematic evaluation of seven noise modelling approaches -- Lindblad master equation, Kraus operator formalism, stochastic Schrodinger equation, randomised benchmarking models, process tomography, Pauli noise models, and coherent error models -- across 24 quantum hardware calibration datasets from IBM Quantum, Google Sycamore, and IonQ Aria processors. QNCM introduces the Noise Model Fidelity Index (NMFI) quantifying how accurately each model reproduces experimental gate error rates, T1/T2 decoherence times, and circuit-level fidelity. Key results: Lindblad master equation achieves NMFI = 0.924 (highest accuracy); Pauli noise models achieve NMFI = 0.882 with 840x lower computational cost; coherent error models are critical for superconducting qubit crosstalk (improving circuit fidelity prediction by 18.4%). The framework provides noise model selection guidance and calibrated noise datasets for 24 real quantum processors.
Abstract This practical guide presents methods for constructing noise models using the Qiskit Aer noise module within the IBM Q ecosystem. The objective is to simulate quantum circuits under realistic error conditions, enabling accurate emulation of noisy quantum processors. The guide demonstrates how to: Use the Qiskit Aer noise module to define custom noise models. Incorporate gate errors, readout errors, and decoherence effects into simulations. Apply noise channels (e.g., depolarizing, amplitude damping, phase damping). Attach noise models to quantum circuit simulations. Analyze how noise affects algorithm performance and output distributions. Building noise models is essential for studying the behavior of quantum algorithms in the NISQ (Noisy Intermediate-Scale Quantum) era. It allows researchers to evaluate algorithm robustness, optimize circuit depth, and test error mitigation strategies before execution on real IBM Quantum hardware. This approach provides a bridge between ideal theoretical circuits and physically realistic quantum devices, enhancing the reliability and applicability of quantum computing experiments.
Context: The main obstacle of quantum computing on its way to scalability is the noisy nature of current hardware. Various types of errors lead to incorrect computational results,and measures such as quantum error mitigation are needed to counteract these errors. Many error mitigation techniques require a thorough understanding of the noise and its impact on computations. Therefore, accurate noise models are indispensable to facilitate meaningful quantum computing in the near future. They also enable realistic simulations of quantum devices. Since these devices are currently limited and quantum computing is expensive, researchers typically rely on simulations for testing their algorithms.Objective: In this thesis, we aim to construct a realistic noise model for quantum computing and optimise its model parameters. The model construction should build on the underlying physical processes, and the number of parameters should scale well with the system size. We also address the evaluation and comparison of different noise models by benchmarks using quantum circuits specific to real-world applications. Finally, we aim to develop useful graphical representations of noise models based on the existing quantum circuit model.Method: We present a benchmarking framework for quantum computing noise models and evaluate it based on benchmarking quality attributes from the literature. Moreover, we construct a quantum computing noise model and develop a training procedure for its parameters. We analyse the parameters of the trained noise model and the impact ofdifferent types of errors on computations. We benchmark the noise model with the above approach and compare it to a noise model provided by IBM’s software development kit Qiskit. Finally, we develop an extension of the quantum circuit model to represent noise channels.Result: The benchmarks performed in this thesis show that our noise model predicts noisy hardware behaviour of IBM’s ibmq_manila quantum device equally well as the Qiskit model, if not better, based on quantum circuits commonly used for variational quantum algorithms. Within the trained noise model, readout error has the most detrimental impact on computations. Our benchmarking approach satisfies relevant quality criteria by choosing suitable quantum circuits and objective functions to compare model predictionsto hardware data. Moreover, the quantum circuit model can be extended meaningfully by noise channels.Conclusion: Our benchmarking approach is suitable for evaluating and comparing quantum computing noise models. In future work, volumetric benchmarks should be performed for various noise models and application contexts. The parameter optimisation based on learning with training circuits yields accurate noise models and shows the importance of mitigating measurement error. Different optimisation algorithms and quantum circuits should be explored, and more types of noise should be incorporated into the noise model.
Quantum Machine Learning (QML) is emerging as a promising technology for tackling complex computational challenges, although its practical implementation faces significant obstacles owed to the inherent noise in current quantum devices. This paper presents a hybrid architecture that combines classical and quantum elements for the development and training of QML models under noisy conditions. This research evaluates the impact of noise on superconducting systems through emulation. The study shows that, compared to noise-free configurations, certain noise levels tend to allow for a reduction in the number of qubits, thus simplifying the architecture of the quantum neural network, which has a direct impact on the computational cost and execution times. Experimental validation was performed by applying three biomedical datasets related to breast cancer detection. The experimental findings revealed that the variations in accuracy between noiseless configurations and those subjected to noisy conditions were minimal, with deviations ranging from 0.11% to 1.68%. Additionally, it was observed that the incorporation of noise during training contributed positively to the efficiency of the process for the datasets under test, achieving improvements in training execution times ranging from a factor of 1.61 to 4.39, when the proposed architecture was emulated on Qaptiva 802.
As distributed quantum computing (DQC) offers a leading path towards scalable quantum computation, the ability to benchmark distributed algorithms under realistic conditions becomes critical for system co-design. However, without access to physical systems, researchers lack tools to evaluate distribution protocols. We introduce Q-DICE (Quantum Distributed Interconnect Compiler and Emulator), a hardware-aware emulation environment for benchmarking distributed quantum circuits on classical simulators and on NISQ-era monolithic hardware. This work provides three core contributions: (1) a programmatic scheme to construct distributed QPU backends, utilizing two novel techniques - QPU slicing and stitching - to facilitate distributed circuit mapping, (2) a methodology for modeling nonlocal link noise using physically motivated Kraus operators and stochastic error channels, and (3) a boundary-aware circuit mapping algorithm enforcing distributed QPU topology constraints during transpilation. Together, these components constitute a distribution-aware compiler and noise-modeling engine that faithfully enforces the physical limitations of distributed quantum hardware within existing execution environments. We validate Q-DICE against a multitude of experimentally demonstrated quantum circuits, including a distributed Grover's search on optically linked trapped-ion hardware, achieving a worst-case fidelity deviation of 4% between simulated and experimental results. These findings demonstrate Q-DICE's capacity to accurately reproduce real distributed quantum system behavior across platforms, streamlining experimentation with distributed quantum algorithms and architectures.