Quantum error correction codes, such as noise-biased squeezed-cat qubits, hold promise for preserving quantum coherence and advancing various quantum information technologies. In this paper we demonstrate the stabilization of squeezed-cat qubits through the cooling of a mechanical oscillator. By investigating the bit-flip rate related to two-photon heating processes originating from the mechanical oscillator, we reveal the oscillator's potential as a probe for detecting environmental temperature. Moreover, we observe that the extended bit-flip lifetime of the squeezed-cat qubit significantly enhances temperature detection sensitivity. Finally, we analyze the impacts of single-photon loss and dephasing channels on thermometry.
Quantum error correction codes, such as noise-biased squeezed-cat qubits, hold promise for preserving quantum coherence and advancing various quantum information technologies. In this paper we demonstrate the stabilization of squeezed-cat qubits through the cooling of a mechanical oscillator. By investigating the bit-flip rate related to two-photon heating processes originating from the mechanical oscillator, we reveal the oscillator's potential as a probe for detecting environmental temperature. Moreover, we observe that the extended bit-flip lifetime of the squeezed-cat qubit significantly enhances temperature detection sensitivity. Finally, we analyze the impacts of single-photon loss and dephasing channels on thermometry.
Noise-biased qubits are a promising route toward significantly reducing the hardware overhead associated with quantum error correction. The squeezed-cat code, a nonlocal encoding in phase space based on squeezed coherent states, is an example of a noise-biased (bosonic) qubit with exponential error bias. Here we propose and analyze the error correction performance of a dissipatively stabilized squeezed-cat qubit. We find that for moderate squeezing the bit-flip error rate gets significantly reduced in comparison with the ordinary cat qubit while leaving the phase-flip rate unchanged. Additionally, we find that the squeezing enables faster and higher-fidelity gates.
Cat qubits, a type of bosonic qubit encoded in a harmonic oscillator, can exhibit an exponential noise bias against bit-flip errors with increasing mean photon number. Here, we focus on cat qubits stabilized by two-photon dissipation, where pairs of photons are added and removed from a harmonic oscillator by an auxiliary, lossy buffer mode. This process requires a large loss rate and strong nonlinearities of the buffer mode that must not degrade the coherence and linearity of the oscillator. In this work, we show how to overcome this challenge by coloring the loss environment of the buffer mode with a multipole filter and optimizing the circuit to take into account additional inductances in the buffer mode. Using these techniques, we achieve near-ideal enhancement of cat-qubit bit-flip times with increasing photon number, reaching over 0.1 s with a mean photon number of only 4. Concurrently, our cat qubit remains highly phase coherent, with phase-flip times corresponding to an effective lifetime of T 1 , eff ≃ 70 μ s , comparable with the bare oscillator lifetime. We achieve this performance even in the presence of an ancilla transmon, used for reading out the cat-qubit states, by engineering a tunable oscillator-ancilla dispersive coupling. Furthermore, the low nonlinearity of the harmonic oscillator mode allows us to perform pulsed cat-qubit stabilization, an important control primitive, where the stabilization can remain off for a significant fraction (e.g., two-thirds) of a 3 μ s cycle without degrading bit-flip times. These advances are important for the realization of scalable error correction with cat qubits, where large noise bias and low phase-flip error rate enable the use of hardware-efficient outer error-correcting codes.
Dissipatively stabilized cat qubits provide a promising route toward fault-tolerant quantum computation, exhibiting exponential suppression of bit-flip errors with increasing phase-space separation of the logical states, while incurring only a linear increase in phase-flip errors. Existing implementations rely on engineered two-photon dissipation via nonlinear coupling to a lossy environment, an approach largely confined to superconducting platforms and limited by spurious decay channels and finite dissipation rates. Here, we propose a fundamentally different stabilization paradigm based on repeated interactions with an auxiliary two-level system mediated by a quadratic Hamiltonian, enabling dissipative stabilization without reservoir engineering. Our approach overcomes key limitations of existing schemes and is compatible with a wider class of experimental platforms. Furthermore, it preserves the noise bias and extends to squeezed cat qubits, rendering single-photon loss errors partially correctable.
Dissipative cat-qubits are a promising architecture for quantum processors due to their built-in quantum error correction. By leveraging two-photon stabilization, they achieve an exponentially suppressed bit-flip error rate as the distance in phase-space between their basis states increases, incurring only a linear increase in phase-flip rate. This property substantially reduces the number of qubits required for fault-tolerant quantum computation. Here, we implement a squeezing deformation of the cat qubit basis states, further extending the bit-flip time while minimally affecting the phase-flip rate. We demonstrate a steep reduction in the bit-flip error rate with increasing mean photon number, characterized by a scaling exponent γ=4.3, rising by a factor of 74 per added photon. Specifically, we measure bit-flip times of 22 seconds for a phase-flip time of 1.3 μs in a squeezed cat qubit with an average photon number nˉ=4.1, a 160-fold improvement in bit-flip time compared to a standard cat. Moreover, we demonstrate a two-fold reduction in Z-gate infidelity, with an estimated phase-flip probability of εX=0.085 and a bit-flip probability of εZ=2.65⋅10−9 which confirms the gate bias-preserving property. This simple yet effective technique enhances cat qubit performances without requiring design modification, moving multi-cat architectures closer to fault-tolerant quantum computation.
Quantum computing crucially relies on maintaining quantum coherence for the duration of a calculation. Bosonic quantum error correction protects this coherence by encoding qubits into superpositions of noise-resilient oscillator states. In the case of the Kerr-cat qubit (KCQ), these states derive their stability from being the quasi-degenerate ground states of an engineered Hamiltonian in a driven nonlinear oscillator. KCQs are experimentally compatible with on-chip architectures and high-fidelity operations, making them promising candidates for a scalable bosonic quantum processor. However, their bit-flip time must increase further to fully leverage these advantages. Here, we present direct evidence that the bit-flip time in a KCQ is limited by leakage out of the qubit manifold and experimentally mitigate this process. We coherently control the leakage population and measure it to be > 9%, twelve times higher than in the undriven system. We then cool this population back into the KCQ manifold with engineered dissipation, identify conditions under which this suppresses bit-flips, and demonstrate increased bit-flip times up to 3.6 milliseconds. By employing both Hamiltonian confinement and engineered dissipation, our experiment combines two paradigms for Schrödinger-cat qubit stabilization. Our results elucidate the interplay between these stabilization processes and indicate a path towards fully realizing the potential of these qubits for quantum error correction.
Stabilized cat qubits that possess biased noise channel with bit-flip errors exponentially smaller than phase-flip errors. Together with a set of bias-preserving (BP) gates, cat qubits are a promising candidate for realizing hardware efficient quantum error correction and fault-tolerant quantum computing. Compared to dissipatively stabilized cat qubits, the Kerr cat qubits can in principle support faster gate operations with higher gate fidelity, benefiting from the large energy gap that protects the code space. However, the leakage of the Kerr cats can increase the minor type of errors and compromise the noise bias. Both the fast implementation of gates and the interaction with environment can lead to such detrimental leakage if no sophisticated controls are applied. In this work, we introduce new fine-control techniques to overcome the above obstacles for Kerr cat qubits. To suppress the gate leakage, we use the derivative-based transition suppression technique to design derivative-based controls for the Kerr BP gates. We show that the fine-controlled gates can simultaneously have high gate fidelity and high noise bias and when applied to concatenated quantum error correction, can not only improve the logical error rate but also reduce resource overhead. To suppress the environment-induced leakage, we introduce colored single-photon dissipation, which can continuously cool the Kerr cats and suppress the minor errors while not enhancing the major errors.