Quantum computing crucially relies on maintaining quantum coherence for the duration of a calculation. Bosonic quantum error correction protects this coherence by encoding qubits into superpositions of noise-resilient oscillator states. In the case of the Kerr-cat qubit (KCQ), these states derive their stability from being the quasi-degenerate ground states of an engineered Hamiltonian in a driven nonlinear oscillator. KCQs are experimentally compatible with on-chip architectures and high-fidelity operations, making them promising candidates for a scalable bosonic quantum processor. However, their bit-flip time must increase further to fully leverage these advantages. Here, we present direct evidence that the bit-flip time in a KCQ is limited by leakage out of the qubit manifold and experimentally mitigate this process. We coherently control the leakage population and measure it to be > 9%, twelve times higher than in the undriven system. We then cool this population back into the KCQ manifold with engineered dissipation, identify conditions under which this suppresses bit-flips, and demonstrate increased bit-flip times up to 3.6 milliseconds. By employing both Hamiltonian confinement and engineered dissipation, our experiment combines two paradigms for Schrödinger-cat qubit stabilization. Our results elucidate the interplay between these stabilization processes and indicate a path towards fully realizing the potential of these qubits for quantum error correction.
Quantum computing crucially relies on maintaining quantum coherence for the duration of a calculation. Bosonic quantum error correction protects this coherence by encoding qubits into superpositions of noise-resilient oscillator states. In the case of the Kerr-cat qubit (KCQ), these states derive their stability from being the quasi-degenerate ground states of an engineered Hamiltonian in a driven nonlinear oscillator. KCQs are experimentally compatible with on-chip architectures and high-fidelity operations, making them promising candidates for a scalable bosonic quantum processor. However, their bit-flip time must increase further to fully leverage these advantages. Here, we present direct evidence that the bit-flip time in a KCQ is limited by leakage out of the qubit manifold and experimentally mitigate this process. We coherently control the leakage population and measure it to be > 9%, twelve times higher than in the undriven system. We then cool this population back into the KCQ manifold with engineered dissipation, identify conditions under which this suppresses bit-flips, and demonstrate increased bit-flip times up to 3.6 milliseconds. By employing both Hamiltonian confinement and engineered dissipation, our experiment combines two paradigms for Schrödinger-cat qubit stabilization. Our results elucidate the interplay between these stabilization processes and indicate a path towards fully realizing the potential of these qubits for quantum error correction.
Stabilized cat qubits that possess biased noise channel with bit-flip errors exponentially smaller than phase-flip errors. Together with a set of bias-preserving (BP) gates, cat qubits are a promising candidate for realizing hardware efficient quantum error correction and fault-tolerant quantum computing. Compared to dissipatively stabilized cat qubits, the Kerr cat qubits can in principle support faster gate operations with higher gate fidelity, benefiting from the large energy gap that protects the code space. However, the leakage of the Kerr cats can increase the minor type of errors and compromise the noise bias. Both the fast implementation of gates and the interaction with environment can lead to such detrimental leakage if no sophisticated controls are applied. In this work, we introduce new fine-control techniques to overcome the above obstacles for Kerr cat qubits. To suppress the gate leakage, we use the derivative-based transition suppression technique to design derivative-based controls for the Kerr BP gates. We show that the fine-controlled gates can simultaneously have high gate fidelity and high noise bias and when applied to concatenated quantum error correction, can not only improve the logical error rate but also reduce resource overhead. To suppress the environment-induced leakage, we introduce colored single-photon dissipation, which can continuously cool the Kerr cats and suppress the minor errors while not enhancing the major errors.
The Kerr-cat qubit is a bosonic qubit in which multiphoton Schrödinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions necessary for stabilizing and controlling this qubit has traditionally required strong microwave drives that heat the qubit and degrade its performance. In contrast, increasing the coupling to the drive port removes the need for strong drives at the expense of large Purcell decay. By integrating an effective band-block filter on chip, we overcome this trade-off and realize a Kerr-cat qubit in a scalable 2D superconducting circuit with high coherence. This filter provides 30 dB of isolation at the qubit frequency with negligible attenuation at the frequencies required for stabilization and readout. We experimentally demonstrate quantum nondemolition readout fidelity of 99.6% for a cat with eight photons. Also, to have high-fidelity universal control over this qubit, we combine fast Rabi oscillations with a new demonstration of the X ( π / 2 ) gate through phase modulation of the stabilization drive. Finally, the lifetime in this architecture is examined as a function of the cat size of up to ten photons in the oscillator, achieving a bit-flip time higher than 1 ms and only a linear increase in the phase-flip rate, in good agreement with the theoretical analysis of the circuit. Our qubit shows promise as a building block for fault-tolerant quantum processors with a small footprint. Published by the American Physical Society 2024
Encoding quantum information onto bosonic systems is a promising route to quantum error correction. In a cat code, this encoding relies on the confinement of the system's dynamics onto the two-dimensional manifold spanned by Schrödinger cats of opposite parity. In dissipative cat qubits, an engineered dissipation scheme combining two-photon drive and loss has been used to autonomously stabilize this manifold, ensuring passive protection against bit-flip errors, regardless of their origin. In Kerr cat qubits, where highly-performing gates can be engineered, two-photon drive and Kerr nonlinearity cooperate to confine the system to a two-fold degenerate ground state manifold spanned by cats of opposite parity. Dissipative, Hamiltonian, and hybrid confinements have been investigated at resonance. Here, we propose a critical cat code, where both two-photon loss and Kerr nonlinearity are present, and the two-photon drive is allowed to be out of resonance. The performance of this code is assessed via the spectral theory of Liouvillians in all configurations, from the purely dissipative to the Kerr limit. We show that large detunings and small, but non-negligible, two-photon loss rates are fundamental to achieve optimal performance. We demonstrate that the competition between nonlinearity and detuning results in a first-order dissipative phase transition, leading to a squeezed vacuum steady state. To achieve the maximal suppression of the logical bit-flip rate requires initializing the system in the metastable state emerging from the first-order transition, and we detail a protocol to do so. Efficiently operating over a broad range of detuning values, the critical cat code is particularly resistant to random frequency shifts characterizing multiple-qubit operations, opening venues for the realization of reliable protocols for scalable and concatenated bosonic qubit architectures.
Dissipatively stabilized cat qubits provide a promising route toward fault-tolerant quantum computation, exhibiting exponential suppression of bit-flip errors with increasing phase-space separation of the logical states, while incurring only a linear increase in phase-flip errors. Existing implementations rely on engineered two-photon dissipation via nonlinear coupling to a lossy environment, an approach largely confined to superconducting platforms and limited by spurious decay channels and finite dissipation rates. Here, we propose a fundamentally different stabilization paradigm based on repeated interactions with an auxiliary two-level system mediated by a quadratic Hamiltonian, enabling dissipative stabilization without reservoir engineering. Our approach overcomes key limitations of existing schemes and is compatible with a wider class of experimental platforms. Furthermore, it preserves the noise bias and extends to squeezed cat qubits, rendering single-photon loss errors partially correctable.
Protected qubits such as the 0-π qubit, and bosonic qubits including cat qubits and Gottesman-Kitaev-Preskill (GKP) qubits offer advantages for fault tolerance. Some of these protected qubits (e.g., 0-π qubit and Kerr-cat qubit) are stabilized by Hamiltonians which have (near-)degenerate ground state manifolds with large energy gaps to the excited state manifolds. Without dissipative stabilization mechanisms the performance of such energy-gap-protected qubits can be limited by leakage to excited states. Here, we propose a scheme for dissipatively stabilizing an energy-gap-protected qubit using colored (i.e., frequency-selective) dissipation without inducing errors in the ground state manifold. Concretely we apply our colored dissipation technique to Kerr-cat qubits and propose colored Kerr-cat qubits which are protected by an engineered colored single-photon loss. When applied to the Kerr-cat qubits our scheme significantly suppresses leakage-induced bit-flip errors (which we show are a limiting error mechanism) while only using linear interactions. Beyond the benefits to the Kerr-cat qubit we also show that our frequency-selective loss technique can be applied to a broader class of protected qubits.
Cat qubits, a type of bosonic qubit encoded in a harmonic oscillator, can exhibit an exponential noise bias against bit-flip errors with increasing mean photon number. Here, we focus on cat qubits stabilized by two-photon dissipation, where pairs of photons are added and removed from a harmonic oscillator by an auxiliary, lossy buffer mode. This process requires a large loss rate and strong nonlinearities of the buffer mode that must not degrade the coherence and linearity of the oscillator. In this work, we show how to overcome this challenge by coloring the loss environment of the buffer mode with a multipole filter and optimizing the circuit to take into account additional inductances in the buffer mode. Using these techniques, we achieve near-ideal enhancement of cat-qubit bit-flip times with increasing photon number, reaching over 0.1 s with a mean photon number of only 4. Concurrently, our cat qubit remains highly phase coherent, with phase-flip times corresponding to an effective lifetime of T 1 , eff ≃ 70 μ s , comparable with the bare oscillator lifetime. We achieve this performance even in the presence of an ancilla transmon, used for reading out the cat-qubit states, by engineering a tunable oscillator-ancilla dispersive coupling. Furthermore, the low nonlinearity of the harmonic oscillator mode allows us to perform pulsed cat-qubit stabilization, an important control primitive, where the stabilization can remain off for a significant fraction (e.g., two-thirds) of a 3 μ s cycle without degrading bit-flip times. These advances are important for the realization of scalable error correction with cat qubits, where large noise bias and low phase-flip error rate enable the use of hardware-efficient outer error-correcting codes.