In this paper, a complex network approach is presented to design the Bernoulli parity-check (BPC) codes with enhanced belief propagation (BP) decoding performance. By investigating the degree correlation between variable and check nodes, we propose the normal graph configuration model (NGCM) to adjust the assortativity coefficient of normal graphs, and investigate the impact of disassortativity on decoding performances. Numerical results demonstrate that, optimizing the disassortativity of normal graphs can significantly enhance the BP decoding performance in both the waterfall and error floor regions. This improvement leads to lower bit-error-rate (BER), frame-error-rate (FER), and decoding complexity. Our study has significant practical and theoretical value, especially for the interdisciplinary research of complex network and coding theory.
In this paper, a complex network approach is presented to design the Bernoulli parity-check (BPC) codes with enhanced belief propagation (BP) decoding performance. By investigating the degree correlation between variable and check nodes, we propose the normal graph configuration model (NGCM) to adjust the assortativity coefficient of normal graphs, and investigate the impact of disassortativity on decoding performances. Numerical results demonstrate that, optimizing the disassortativity of normal graphs can significantly enhance the BP decoding performance in both the waterfall and error floor regions. This improvement leads to lower bit-error-rate (BER), frame-error-rate (FER), and decoding complexity. Our study has significant practical and theoretical value, especially for the interdisciplinary research of complex network and coding theory.
For the scenarios with high throughput requirements, the belief propagation (BP) decoding is one of the most promising decoding strategies for polar codes. By pruning the redundant variable nodes (VNs) and check nodes (CNs) in the original factor graph, the graph is condensed to a sparse bipartite graph which is similar to the graph for low-density parity-check (LDPC) codes. In this paper, we introduce the bit-flipping scheme into the LDPC-like BP (L-BP) decoding and propose two methods to identify the error-prone VNs. By additional decoding attempts, the L-BP flip (L-BPF) decoding improves the error-rate performance with a similar average complexity for high Eb=N0values. The simulation results show that the L-BPF decoding achieves 0:25 dB gain compared with the L-BP decoding.
Belief propagation (BP) has attracted increasing attention due to its high parallelism. In this letter, a correction method is proposed to improve the block error rate (BLER) performance of the BP decoder for polar codes so that it is comparable to that of the successive cancellation list (SCL) decoder. Compared with BP flipping (BPF) decoding, the proposed decoder focuses on prior knowledge of the code bits in the factor graph. Two strategies have been proposed to construct the correction set. The simulation results show that the BPC decoder exhibits a BLER similar to that of BPF decoder while reducing the average latency and complexity by half. In addition, the BLER of the BPC decoder can approach that of the cyclic redundancy check (CRC)-aided SCL (CA-SCL) decoder in regions with low and medium signal-to-noise ratios (SNRs).
Belief propagation (BP) decoding for polar codes has been extensively studied because of its inherent parallelism. However, its performance remains inferior to that of successive cancellation list decoding (SCL) due to the structure of the decoding graph. To improve the block error rate (BLER) performance, the BP correction (BPC) decoding, a post-processing scheme that corrects prior knowledge of the identified code bit, improves convergence by executing additional iterations on the failed BP decoder. Moreover, the BPC decoder demonstrates a better decoding performance than the BP-based bit-flipping decoder. Nevertheless, the additional decoding attempts lead to increased latency. In this article, a modified BPC decoder is proposed to reduce the number of decoding attempts by redefining the correction rules. A new metric is designed to effectively identify the corrected location. Numerical results show that the proposed modified BPC decoder achieves a slight improvement in BLER compared with the original BPC, with a dramatic reduction in average complexity. Furthermore, a higher-order version, named MBPC-Ω, is extended to further improve the performance, where the Ω is the maximum correction order. Numerical results show that the higher-order modified BPC achieves a similar BLER performance to existing multiple bit-flipping BP decoders but has around half the latency overhead. In addition, the proposed MBPC-2 decoder performs better than the cyclic redundancy check-aided SCL (CA-SCL) decoder with list size 4 and is slightly worse than the CA-SCL with list size 8 in high signal-to-noise ratio (SNR) regions but with significant decoding latency reduction.
In this paper we propose algorithms which combine Belief-propagation (BP) decoding algorithm with genetic algorithm (GA). The main idea is to improve the performance of traditional BP decoding algorithm by efficiently using the belief of variable nodes passing to check nodes. By considering the belief as genes, the proposed algorithms mainly employ the mutation operation in GA, and change the genes¿ amplitudes (either increase or decrease) when updating the check nodes¿ information. First, we explore that the marriage of the GA and BP decoding algorithm is reasonable. Three algorithms are proposed accordingly. Proposed algorithm I mutates chosen genes by amplitude enhancement, while proposed algorithm II by amplitude reduction. Finally, proposed algorithm III is a mixture of the former two. From computer simulation results, we show that for short and middle length LDPC codes, our proposed algorithms can improve both BER (bit error rate) and FER (frame error rate) performance over traditional BP decoding algorithm, with slight modification of traditional BP decoding algorithm and little increase of computation complexity.
At the heart of modern coding theory lies the fact that low-density parity-check (LDPC) codes can be efficiently decoded by belief propagation (BP). The BP is an inference algorithm which operates on a graphical model of a code, and lends itself to low-complexity and high-speed implementations, making it the algorithm of choice in many applications. It has unprecedentedly good error rate performance, so good that when decoded by the BP, LDPC codes approach theoretical limits of channel capacity. However, this capacity approaching property holds only in the asymptotic limit of code length, while codes of practical lengths suffer abrupt performance degradation in the low noise regime known as the error floor phenomenon. Our study of error floor has led to an interesting and surprising finding that it is possible to design iterative decoders which are much simpler yet better than belief propagation! These decoders do not propagate beliefs but a rather different kind of messages that reflect the local structure of the code graph. This has opened a plethora of exciting theoretical problems and applications. This paper introduces this new paradigm.
The recent renaissance of one particular class of error-correcting codes called low-density parity-check (LDPC) codes has revolutionized the area of communications leading to the so-called field of modern coding theory. At the heart of this theory lies the fact that LDPC codes can be efficiently decoded by an iterative inference algorithm known as belief propagation (BP) which operates on a graphical model of a code. With BP decoding, LDPC codes are able to achieve an exceptionally good error-rate performance as they can asymptotically approach Shannon's capacity. However, LDPC codes under BP decoding suffer from the error floor phenomenon, an abrupt degradation in the error-rate performance of the code in the high signal-to-noise ratio region, which prevents the decoder from achieving very low error-rates. It arises mainly due to the sub-optimality of BP decoding on finite-length loopy graphs. Moreover, the effects of finite precision that stem from hardware realizations of BP decoding can further worsen the error floor phenomenon. Over the past few years, the error floor problem has emerged as one of the most important problems in coding theory with applications now requiring very low error rates and faster processing speeds. Further, addressing the error floor problem while taking finite precision into account in the decoder design has remained a challenge. In this dissertation, we introduce a new paradigm for finite precision iterative decoding of LDPC codes over the binary symmetric channel (BSC). These novel decoders, referred to as finite alphabet iterative decoders (FAIDs), are capable of surpassing the BP in the error floor region at a much lower complexity and memory usage than BP without any compromise in decoding latency. The messages propagated by FAIDs are not quantized probabilities or log-likelihoods, and the variable node update functions do not mimic the BP decoder. Rather, the update functions are simple maps designed to ensure a higher guaranteed error correction capability which improves the error floor performance. We provide a methodology for the design of FAIDs on column-weight-three codes. Using this methodology, we design 3-bit precision FAIDs that can surpass the BP (floating-point) in the error floor region on several column-weight-three codes of practical interest. While the proposed FAIDs are able to outperform the BP decoder with low precision, the analysis of FAIDs still proves to be a difficult issue. Furthermore, their achievable guaranteed error correction capability is still far from what is achievable by the optimal maximum-likelihood (ML) decoding. In order to address these two issues, we propose another novel class of decoders called decimation-enhanced FAIDs for LDPC codes. For this class of decoders, the technique of decimation is incorporated into the variable node update function of FAIDs. Decimation, which involves fixing certain bits of the code to a particular value during decoding, can significantly reduce the number of iterations required to correct a fixed number of errors while maintaining the good performance of a FAID, thereby making such decoders more amenable to analysis. We illustrate this for 3-bit precision FAIDs on column-weight-three codes and provide insights into the analysis of such decoders. We also show how decimation can be used adaptively to further enhance the guaranteed error correction capability of FAIDs that are already good on a given code. The new adaptive decimation scheme proposed has marginally added complexity but can significantly increase the slope of the error floor in the error-rate performance of a particular FAID. On certain high-rate column-weight-three codes of practical interest, we show that adaptive decimation-enhanced FAIDs can achieve a guaranteed error-correction capability that is close to the theoretical limit achieved by ML decoding.