This paper introduces a novel variational quantum algorithm built upon the established Quantum Approximate Optimization Algorithm also known as QAOA. Since the known parameter fixing strategy imposes constraints on QAOA to enhance tractability at the cost of some expressive power, the proposed layerwise approach integrates it with the existing Multi-Angle QAOA technique, which is characterized in turn by height-ened expressiveness through an increased number of parameters, albeit with increased optimization challenges. Consequently, the proposed layerwise-Multi-Angle QAOA combines the strengths of one variant with the limitations of the other, striking a balance in algorithmic design. The effectiveness of the proposed algorithm is assessed through experimental evaluations on the Maximum Cut problem. This study reveals promising results in heuristic predictions, with robustness both in terms of approximation ratio and optimization capabilities.
This paper introduces a novel variational quantum algorithm built upon the established Quantum Approximate Optimization Algorithm also known as QAOA. Since the known parameter fixing strategy imposes constraints on QAOA to enhance tractability at the cost of some expressive power, the proposed layerwise approach integrates it with the existing Multi-Angle QAOA technique, which is characterized in turn by height-ened expressiveness through an increased number of parameters, albeit with increased optimization challenges. Consequently, the proposed layerwise-Multi-Angle QAOA combines the strengths of one variant with the limitations of the other, striking a balance in algorithmic design. The effectiveness of the proposed algorithm is assessed through experimental evaluations on the Maximum Cut problem. This study reveals promising results in heuristic predictions, with robustness both in terms of approximation ratio and optimization capabilities.
The quantum approximate optimization algorithm (QAOA) generates an approximate solution to combinatorial optimization problems using a variational ansatz circuit defined by parameterized layers of quantum evolution. In theory, the approximation improves with increasing ansatz depth but gate noise and circuit complexity undermine performance in practice. Here, we investigate a multi-angle ansatz for QAOA that reduces circuit depth and improves the approximation ratio by increasing the number of classical parameters. Even though the number of parameters increases, our results indicate that good parameters can be found in polynomial time for a test dataset we consider. This new ansatz gives a 33% increase in the approximation ratio for an infinite family of MaxCut instances over QAOA. The optimal performance is lower bounded by the conventional ansatz, and we present empirical results for graphs on eight vertices that one layer of the multi-angle anstaz is comparable to three layers of the traditional ansatz on MaxCut problems. Similarly, multi-angle QAOA yields a higher approximation ratio than QAOA at the same depth on a collection of MaxCut instances on fifty and one-hundred vertex graphs. Many of the optimized parameters are found to be zero, so their associated gates can be removed from the circuit, further decreasing the circuit depth. These results indicate that multi-angle QAOA requires shallower circuits to solve problems than QAOA, making it more viable for near-term intermediate-scale quantum devices.
The capability of the quantum approximate optimization algorithm (QAOA) in solving combinatorial optimization problems has been intensively studied in recent years due to its application in the quantum-classical hybrid regime. Despite having difficulties that are innate in the variational quantum algorithms (VQA), such as barren plateaus and the local minima problem, QAOA remains one of the applications that is suitable for the recent noisy intermediate scale quantum (NISQ) devices. Recent works have shown that the performance of QAOA largely depends on the initial parameters, which motivate parameter initialization strategies to obtain good initial points for the optimization of QAOA. On the other hand, optimization strategies focus on the optimization part of QAOA instead of the parameter initialization. Instead of having absolute advantages, these strategies usually impose trade-offs to the performance of the optimization problems. One such example is the layerwise optimization strategy, in which the QAOA parameters are optimized layer by layer instead of the full optimization. The layerwise strategy costs less in total compared to the full optimization, in exchange of lower approximation ratio. In this work, we propose the iterative layerwise optimization strategy and explore the possibility for the reduction of optimization cost in solving problems with QAOA. Using numerical simulations, we found that by combining the iterative layerwise strategy with proper initialization strategies, the optimization cost can be significantly reduced in exchange for a minor reduction in the approximation ratio. We also show that in some cases, the approximation ratio given by the iterative layerwise strategy is even higher than that given by the full optimization.
In the Noisy Intermediate-Scale Quantum (NISQ) era, the Quantum Approximate Optimization Algorithm (QAOA) has attracted significant attention as an algorithm for solving combinatorial optimization problems that are classically intractable. Various modifications and training strategies have been proposed to enhance the performance of QAOA. However, as the circuit depth increases, existing methods encounter greater training difficulty and reach a barren plateau in performance improvements. In this paper, we propose the Smart Insert Layerwise QAOA (SIL QAOA) to overcome these challenges. In SIL QAOA, at each stage, a new layer is inserted into all possible positions; each circuit is independently optimized, and the parameter set from the circuit yielding the highest expectation value is adopted as the initial parameter for the next stage. Applying the proposed method to the MaxCut problem, we achieved up to approximately 11% higher approximation ratios compared to conventional Layerwise learning QAOA, while successfully mitigating early performance saturation observed at shallow depths. These results demonstrate the superior performance improvement capability of SIL QAOA. Furthermore, we also discuss its potential applicability to more complex optimization problems and deeper variational quantum circuits in future work.
The quantum approximate optimization algorithm (QAOA) is a hybrid quantum-classical algorithm for solving combinatorial optimization problems. Multi-angle QAOA (MA-QAOA), which assigns independent parameters to each Hamiltonian operator term, achieves superior approximation performance even with fewer layers than standard QAOA. Unfortunately, this increased expressibility can raise the classical computational cost due to a greater number of parameters. The recently proposed Layerwise MA-QAOA (LMA-QAOA) reduces this overhead by training one layer at a time, but it may suffer from obtaining the precise solution due to the previously fixed parameters. This work addresses two questions for efficient MA-QAOA training: (i) What is the optimal granularity for parameter updates per epoch, and (ii) How can we get precise final cost function results while only partially updating the parameters per epoch? Despite the benefit of reducing the parameters that update per epoch can reduce the classical computation overhead, too fine or coarse a granularity of Hamiltonian update can degrade the MA-QAOA training efficiency. We find that optimizing one complete layer per epoch is an efficient granularity. Moreover, selectively retraining each layer by tracking gradient variations can achieve a final cost function equivalent to the standard MA-QAOA while lowering the parameter update overhead. Based on these insights, we propose Orbit-QAOA, which cyclically revisits layers and selectively freezes stabilized parameters. Across diverse graph benchmarks, Orbit-QAOA reduces training steps by up to 81.8%, reduces approximation ratio error by up to 72x compared to the unified stop condition-applied enhanced LMA-QAOA, and achieves equivalent approximation performance compared to the standard MA-QAOA.
The quantum approximate optimization algorithm (QAOA) is known for its capability and universality in solving combinatorial optimization problems on near-term quantum devices. The results yielded by QAOA depend strongly on its initial variational parameters. Hence, parameter selection for QAOA becomes an active area of research, as bad initialization might deteriorate the quality of the results, especially at great circuit depths. We first discuss the patterns of optimal parameters in QAOA in two directions: the angle index and the circuit depth. Then, we discuss the symmetries and periodicity of the expectation that is used to determine the bounds of the search space. Based on the patterns in optimal parameters and the bounds restriction, we propose a strategy that predicts the new initial parameters by taking the difference between the previous optimal parameters. Unlike most other strategies, the strategy we propose does not require multiple trials to ensure success. It only requires one prediction when progressing to the next depth. We compare this strategy with our previously proposed strategy and the layerwise strategy for solving the Max-cut problem in terms of the approximation ratio and the optimization cost. We also address the non-optimality in previous parameters, which is seldom discussed in other works despite its importance in explaining the behavior of variational quantum algorithms.
The Quantum Approximate Optimization Algorithm (QAOA) is a leading variational approach for combinatorial problems, yet its performance on NISQ hardware is limited depthbounds and challenging parameter landscapes. We propose Enhanced QAOA (EQAOA), a modified ansatz that appends a compact multi-parameter layer and uses a blockwise optimization scheme. This design preserves the QAOA evolution while broadening the candidate solution space and easing solution exploration. Applied to the MaxCut problem across diverse graph families, EQAOA achieves, with an order of magnitude smaller circuit depth, approximation ratios comparable to QAOA, using a single cost–mixer layer, thus reducing gate counts by up to fivefold, as supported by experiments. Moreover, ablation studies prove that blockwise fine-tuning is crucial to deliver higher-quality solutions at shallower depth, offering a practical, quantum hardware-efficient alternative for signal processing applications.