The quantum approximate optimization algorithm (QAOA) is known for its capability and universality in solving combinatorial optimization problems on near-term quantum devices. The results yielded by QAOA depend strongly on its initial variational parameters. Hence, parameter selection for QAOA becomes an active area of research, as bad initialization might deteriorate the quality of the results, especially at great circuit depths. We first discuss the patterns of optimal parameters in QAOA in two directions: the angle index and the circuit depth. Then, we discuss the symmetries and periodicity of the expectation that is used to determine the bounds of the search space. Based on the patterns in optimal parameters and the bounds restriction, we propose a strategy that predicts the new initial parameters by taking the difference between the previous optimal parameters. Unlike most other strategies, the strategy we propose does not require multiple trials to ensure success. It only requires one prediction when progressing to the next depth. We compare this strategy with our previously proposed strategy and the layerwise strategy for solving the Max-cut problem in terms of the approximation ratio and the optimization cost. We also address the non-optimality in previous parameters, which is seldom discussed in other works despite its importance in explaining the behavior of variational quantum algorithms.
The quantum approximate optimization algorithm (QAOA) is known for its capability and universality in solving combinatorial optimization problems on near-term quantum devices. The results yielded by QAOA depend strongly on its initial variational parameters. Hence, parameter selection for QAOA becomes an active area of research, as bad initialization might deteriorate the quality of the results, especially at great circuit depths. We first discuss the patterns of optimal parameters in QAOA in two directions: the angle index and the circuit depth. Then, we discuss the symmetries and periodicity of the expectation that is used to determine the bounds of the search space. Based on the patterns in optimal parameters and the bounds restriction, we propose a strategy that predicts the new initial parameters by taking the difference between the previous optimal parameters. Unlike most other strategies, the strategy we propose does not require multiple trials to ensure success. It only requires one prediction when progressing to the next depth. We compare this strategy with our previously proposed strategy and the layerwise strategy for solving the Max-cut problem in terms of the approximation ratio and the optimization cost. We also address the non-optimality in previous parameters, which is seldom discussed in other works despite its importance in explaining the behavior of variational quantum algorithms.
The quantum approximate optimization algorithm (QAOA) has numerous promising applications in solving the combinatorial optimization problems on near-term Noisy Intermediate Scalable Quantum (NISQ) devices. QAOA has a quantum-classical hybrid structure. Its quantum part consists of a parameterized alternating operator ansatz, and its classical part comprises an optimization algorithm, which optimizes the parameters to maximize the expectation value of the problem Hamiltonian. This expectation value depends highly on the parameters, this implies that a set of good parameters leads to an accurate solution. However, at large circuit depth of QAOA, it is difficult to achieve global optimization due to the multiple occurrences of local minima or maxima. In this paper, we propose a parameters fixing strategy which gives high approximation ratio on average, even at large circuit depths, by initializing QAOA with the optimal parameters obtained from the previous depths. We test our strategy on the Max-cut problem of certain classes of graphs such as the 3-regular graphs and the Erdös-Rényi graphs.
The capability of the quantum approximate optimization algorithm (QAOA) in solving combinatorial optimization problems has been intensively studied in recent years due to its application in the quantum-classical hybrid regime. Despite having difficulties that are innate in the variational quantum algorithms (VQA), such as barren plateaus and the local minima problem, QAOA remains one of the applications that is suitable for the recent noisy intermediate scale quantum (NISQ) devices. Recent works have shown that the performance of QAOA largely depends on the initial parameters, which motivate parameter initialization strategies to obtain good initial points for the optimization of QAOA. On the other hand, optimization strategies focus on the optimization part of QAOA instead of the parameter initialization. Instead of having absolute advantages, these strategies usually impose trade-offs to the performance of the optimization problems. One such example is the layerwise optimization strategy, in which the QAOA parameters are optimized layer by layer instead of the full optimization. The layerwise strategy costs less in total compared to the full optimization, in exchange of lower approximation ratio. In this work, we propose the iterative layerwise optimization strategy and explore the possibility for the reduction of optimization cost in solving problems with QAOA. Using numerical simulations, we found that by combining the iterative layerwise strategy with proper initialization strategies, the optimization cost can be significantly reduced in exchange for a minor reduction in the approximation ratio. We also show that in some cases, the approximation ratio given by the iterative layerwise strategy is even higher than that given by the full optimization.
Abstract The Quantum approximate optimization algorithm (QAOA) is a quantum-classical hybrid algorithm aiming to produce approximate solutions for combinatorial optimization problems. In the QAOA, the quantum part prepares a quantum parameterized state that encodes the solution, where the parameters are optimized by a classical optimizer. However, it is difficult to find optimal parameters when the quantum circuit becomes deeper. Hence, there is numerous active research on the performance and the optimization cost of QAOA. In this work, we build a convolutional neural network to predict parameters of depth p + 1 QAOA instance by the parameters from the depth p QAOA counterpart. We propose two strategies based on this model. First, we recurrently apply the model to generate a set of initial values for a certain depth QAOA. It successfully initiates depth 10 QAOA instances, whereas each model is only trained with the parameters from depths less than 6. Second, the model is applied repetitively until the maximum expected value is reached. An average approximation ratio of 0.9759 for Max-Cut over 264 Erdős–Rényi graphs is obtained, while the optimizer is only adopted for generating the first input of the model.
The quantum approximate optimization algorithm (QAOA) is a leading iterative variational quantum algorithm for heuristically solving combinatorial optimization problems. A large portion of the computational effort in QAOA is spent by the optimization steps, which require many executions of the quantum circuit. Therefore, there is active research focusing on finding better initial circuit parameters, which would reduce the number of required iterations and hence the overall execution time. While existing methods for parameter initialization have shown great success, they often offer a single set of parameters for all problem instances. We propose a practical method that uses a simple, fully connected neural network that leverages previous executions of QAOA to find better initialization parameters tailored to a new given problem instance. We benchmark state-of-the-art initialization methods for solving the MaxCut problem of Erdős-Rényi graphs using QAOA and show that our method is consistently the fastest to converge while also yielding the best final result. Furthermore, the parameters predicted by the neural network are shown to match very well with the fully optimized parameters, to the extent that no iterative steps are required, thereby effectively realizing an iterative-free QAOA scheme.
The quantum approximate optimization algorithm (QAOA) generates an approximate solution to combinatorial optimization problems using a variational ansatz circuit defined by parameterized layers of quantum evolution. In theory, the approximation improves with increasing ansatz depth but gate noise and circuit complexity undermine performance in practice. Here, we investigate a multi-angle ansatz for QAOA that reduces circuit depth and improves the approximation ratio by increasing the number of classical parameters. Even though the number of parameters increases, our results indicate that good parameters can be found in polynomial time for a test dataset we consider. This new ansatz gives a 33% increase in the approximation ratio for an infinite family of MaxCut instances over QAOA. The optimal performance is lower bounded by the conventional ansatz, and we present empirical results for graphs on eight vertices that one layer of the multi-angle anstaz is comparable to three layers of the traditional ansatz on MaxCut problems. Similarly, multi-angle QAOA yields a higher approximation ratio than QAOA at the same depth on a collection of MaxCut instances on fifty and one-hundred vertex graphs. Many of the optimized parameters are found to be zero, so their associated gates can be removed from the circuit, further decreasing the circuit depth. These results indicate that multi-angle QAOA requires shallower circuits to solve problems than QAOA, making it more viable for near-term intermediate-scale quantum devices.
Abstract The quantum approximate optimization algorithm (QAOA) is a leading iterative variational quantum algorithm for heuristically solving combinatorial optimization problems. A large portion of the computational effort in QAOA is spent by the optimization steps, which require many executions of the quantum circuit. Therefore, there is active research focusing on finding better initial circuit parameters, which would reduce the number of required iterations and hence the overall execution time. While existing methods for parameter initialization have shown great success, they often offer a single set of parameters for all problem instances. We propose a practical method that uses a simple, fully connected neural network that leverages previous executions of QAOA to find better initialization parameters tailored to a new given problem instance. We benchmark state-of-the-art initialization methods for solving the MaxCut problem of Erdős-Rényi graphs using QAOA and show that our method is consistently the fastest to converge while also yielding the best final result. Furthermore, the parameters predicted by the neural network are shown to match very well with the fully optimized parameters, to the extent that no iterative steps are required, thereby effectively realizing an iteration-free QAOA scheme.