The quantum approximate optimization algorithm (QAOA) has numerous promising applications in solving the combinatorial optimization problems on near-term Noisy Intermediate Scalable Quantum (NISQ) devices. QAOA has a quantum-classical hybrid structure. Its quantum part consists of a parameterized alternating operator ansatz, and its classical part comprises an optimization algorithm, which optimizes the parameters to maximize the expectation value of the problem Hamiltonian. This expectation value depends highly on the parameters, this implies that a set of good parameters leads to an accurate solution. However, at large circuit depth of QAOA, it is difficult to achieve global optimization due to the multiple occurrences of local minima or maxima. In this paper, we propose a parameters fixing strategy which gives high approximation ratio on average, even at large circuit depths, by initializing QAOA with the optimal parameters obtained from the previous depths. We test our strategy on the Max-cut problem of certain classes of graphs such as the 3-regular graphs and the Erdös-Rényi graphs.
The quantum approximate optimization algorithm (QAOA) has numerous promising applications in solving the combinatorial optimization problems on near-term Noisy Intermediate Scalable Quantum (NISQ) devices. QAOA has a quantum-classical hybrid structure. Its quantum part consists of a parameterized alternating operator ansatz, and its classical part comprises an optimization algorithm, which optimizes the parameters to maximize the expectation value of the problem Hamiltonian. This expectation value depends highly on the parameters, this implies that a set of good parameters leads to an accurate solution. However, at large circuit depth of QAOA, it is difficult to achieve global optimization due to the multiple occurrences of local minima or maxima. In this paper, we propose a parameters fixing strategy which gives high approximation ratio on average, even at large circuit depths, by initializing QAOA with the optimal parameters obtained from the previous depths. We test our strategy on the Max-cut problem of certain classes of graphs such as the 3-regular graphs and the Erdös-Rényi graphs.
The Quantum Approximate Optimization Algorithm (QAOA) is a hybrid quantum-classical algorithm to solve binary-variable optimization problems. Due to its expected robustness to systematic errors and the short circuit depth, it is one of the promising candidates likely to run on near-term quantum devices. We project the performance of QAOA applied to the Max-Cut problem and compare it with some of the best classical alternatives, both for exact or approximate solution. When comparing approximate solvers, their performance is characterized by the computational time taken to achieve a given quality of solution. Since QAOA is based on sampling, we introduce performance metrics based on the probability of observing a sample above a certain quality. In addition, we show that the QAOA performance varies significantly with the graph type. By selecting a suitable optimizer for the variational parameters and reducing the number of function evaluations, QAOA performance improves by up to 2 orders of magnitude compared to previous estimates. Especially for 3-regular random graphs, this setting decreases the performance gap with classical alternatives.
The Quantum Approximate Optimization Algorithm (QAOA) is one of the promising near-term algorithms designed to find approximate solutions for combinatorial optimization problems. The algorithm prepares a parametrized state that is aimed to maximize the expectation value of the objective function of the problem. The circuit for QAOA consists of p layers, and it depends on 2p parameters, the determination of which can be carried out using a variational quantum eigensolver (VQE) subroutine. This is a variational approach for finding optimal parameters, where the quantum state is prepared with a quantum computer, and a classical computer is used for calculating the corresponding objective function value and performing an outer loop optimization routine in order to find optimal parameters. Earlier work on the algorithm has shown that QAOA is closely related to the Quantum Adiabatic Algorithm, which results in noticeable patterns in the optimal parameters. To this purpose, two methods, INTERP and FOURIER, were proposed to exploit this structure by Zhou et al. (2018). In this thesis, I extend upon these results by examining the effectiveness of one of their methods, the INTERP method, on the Max-Cut problem from graph theory. The performance of QAOA using this method was studied on several classes of graphs and benchmarked against the currently best-known classical algorithm Goemans-Williamson, which achieves an approximation ratio of ρ ≈ 0.878 on arbitrary graphs. The classes of graphs examined include cyclic, weighted and unweighted 3-regular, and Erdős–Rényi graphs with edge probabilities of 0.5 and 0.75 and graph sizes ranging from 4 to 16. Moreover, it was investigated if the INTERP method offers an advantage compared to random initialization of parameters and whether or not the method is polynomial in p. It was found that different graph classes lead to similar but different parameter patterns. Furthermore, the performance of QAOA using the INTERP method was dependent on the graph class considered. For the small graphs investigated it was found that QAOA outperforms Goemans-Williamson on ER-0.50, ER-0.75 and weighted 3-regular graphs from p=7 and beyond with respect to how well the expectation of the objective function approximates the optimal value, while for unweighted 3-regular graphs p=6 suffices. However, the calculation of the parameters is costly and requires a number of function evaluations that is on the order of the number of possible bipartitions of small graph with sizes n ≤ 16. Moreover, the numerical results suggested that indeed the method is polynomial in p advocating that the algorithm might be a strong alternative to Goemans-Williamson for large graph sizes, once hardware allows it.
The quantum approximate optimization algorithm (QAOA) is known for its capability and universality in solving combinatorial optimization problems on near-term quantum devices. The results yielded by QAOA depend strongly on its initial variational parameters. Hence, parameter selection for QAOA becomes an active area of research, as bad initialization might deteriorate the quality of the results, especially at great circuit depths. We first discuss the patterns of optimal parameters in QAOA in two directions: the angle index and the circuit depth. Then, we discuss the symmetries and periodicity of the expectation that is used to determine the bounds of the search space. Based on the patterns in optimal parameters and the bounds restriction, we propose a strategy that predicts the new initial parameters by taking the difference between the previous optimal parameters. Unlike most other strategies, the strategy we propose does not require multiple trials to ensure success. It only requires one prediction when progressing to the next depth. We compare this strategy with our previously proposed strategy and the layerwise strategy for solving the Max-cut problem in terms of the approximation ratio and the optimization cost. We also address the non-optimality in previous parameters, which is seldom discussed in other works despite its importance in explaining the behavior of variational quantum algorithms.
The max-cut problem (MCP) is a classic problem in the field of combinatorial optimization and has important applications in various fields, including statistical physics and image processing. However, except for some special cases, the MCP still encounters a non-deterministic polynomial complete problem (an NP-complete problem), and there is currently no known efficient classical algorithm that can solve it in polynomial time. The quantum approximate optimization algorithm (QAOA), as a pivotal algorithm in the noisy intermediate-scale quantum (NISQ) computing era, has shown significant potential for solving the MCP. However, due to the lack of quantum error correction, the reliability of computations in NISQ systems sharply declines as the circuit depth of the algorithm increases. Therefore, designing an efficient, shallow-depth, and low-complexity QAOA for the MCP is a critical challenge in demonstrating the advantages of quantum computing in the NISQ era.In this paper, according to the standard QAOA algorithm, we introduce Pauli Y rotation gates into the target Hamiltonian circuit for the MCP. By enhancing the flexibility of quantum trial functions and improving the efficiency of Hilbert space exploration within a single iteration, we significantly improve the performance of QAOA on the MCP.We conduct extensive numerical simulations using the MindSpore quantum platform, and compare the proposed RY-layer-assisted QAOA with standard QAOA and its existing variants, including MA-QAOA and QAOA+. The experiments are performed on various graph types, including complete graphs, 3-regular graphs, 4-regular graphs, and random graphs with edge probabilities between 0.3 and 0.5. Our results show that the RY-layer-assisted QAOA achieves higher approximation ratios in all graph types, particularly in regular and random graphs, where traditional QAOA variants are difficult to implement. Moreover, the proposed method exhibits strong robustness as the graph size increases, and can maintain high performance even for larger graphs. Importantly, the RY-layer-assisted QAOA requires fewer CNOT gates and has a lower circuit depth than the standard QAOA and its variants, making it more suitable for NISQ devices with limited coherence times and high error rates.In conclusion, the RY-layer-assisted QAOA provides a promising approach for solving MCP in the NISQ era. By improving the approximation ratio while reducing circuit complexity, this method demonstrates significant potential for practical quantum computing applications, thus paving the way for developing more efficient and reliable quantum optimization algorithms.
The Quantum Approximate Optimization Algorithm (QAOA), which is a variational quantum algorithm, aims to give sub-optimal solutions of combinatorial optimization problems. It is widely believed that QAOA has the potential to demonstrate application-level quantum advantages in the noisy intermediate-scale quantum(NISQ) processors with shallow circuit depth. Since the core of QAOA is the computation of expectation values of the problem Hamiltonian, an important practical question is whether we can find an efficient classical algorithm to solve quantum mean value in the case of general shallow quantum circuits. Here, we present a novel graph decomposition based classical algorithm that scales linearly with the number of qubits for the shallow QAOA circuits in most optimization problems except for complete graph case. Numerical tests in Max-cut, graph coloring and Sherrington-Kirkpatrick model problems, compared to the state-of-the-art method, shows orders of magnitude performance improvement. Our results are not only important for the exploration of quantum advantages with QAOA, but also useful for the benchmarking of NISQ processors.
Abstract The Quantum approximate optimization algorithm (QAOA) is a quantum-classical hybrid algorithm aiming to produce approximate solutions for combinatorial optimization problems. In the QAOA, the quantum part prepares a quantum parameterized state that encodes the solution, where the parameters are optimized by a classical optimizer. However, it is difficult to find optimal parameters when the quantum circuit becomes deeper. Hence, there is numerous active research on the performance and the optimization cost of QAOA. In this work, we build a convolutional neural network to predict parameters of depth p + 1 QAOA instance by the parameters from the depth p QAOA counterpart. We propose two strategies based on this model. First, we recurrently apply the model to generate a set of initial values for a certain depth QAOA. It successfully initiates depth 10 QAOA instances, whereas each model is only trained with the parameters from depths less than 6. Second, the model is applied repetitively until the maximum expected value is reached. An average approximation ratio of 0.9759 for Max-Cut over 264 Erdős–Rényi graphs is obtained, while the optimizer is only adopted for generating the first input of the model.