One of the most promising approaches towards large-scale quantum computation uses devices based on many Josephson junctions. Yet, even today, open questions regarding the single junction remain unsolved, such as the detailed understanding of the quantum phase transitions, the coupling of the Josephson junction to the environment or how to improve the coherence of a superconducting qubit. Here we design and build an engineered on-chip reservoir connected to a Josephson junction that acts as an efficient bolometer for detecting the Josephson radiation under non-equilibrium, that is, biased conditions. The bolometer converts the a.c. Josephson current at microwave frequencies up to about 100 GHz into a temperature rise measured by d.c. thermometry. A circuit model based on realistic parameter values captures both the current-voltage characteristics and the measured power quantitatively. The present experiment demonstrates an efficient, wide-band, thermal detection scheme of microwave photons and provides a sensitive detector of Josephson dynamics beyond the standard conductance measurements.
One of the most promising approaches towards large-scale quantum computation uses devices based on many Josephson junctions. Yet, even today, open questions regarding the single junction remain unsolved, such as the detailed understanding of the quantum phase transitions, the coupling of the Josephson junction to the environment or how to improve the coherence of a superconducting qubit. Here we design and build an engineered on-chip reservoir connected to a Josephson junction that acts as an efficient bolometer for detecting the Josephson radiation under non-equilibrium, that is, biased conditions. The bolometer converts the a.c. Josephson current at microwave frequencies up to about 100 GHz into a temperature rise measured by d.c. thermometry. A circuit model based on realistic parameter values captures both the current-voltage characteristics and the measured power quantitatively. The present experiment demonstrates an efficient, wide-band, thermal detection scheme of microwave photons and provides a sensitive detector of Josephson dynamics beyond the standard conductance measurements.
A Josephson junction (JJ) has been under intensive study ever since 1960's. Yet even in the present era of building quantum information processing devices based on many JJs, open questions regarding a single junction remain unsolved, such as quantum phase transitions, coupling of the JJ to an environment and improving coherence of a superconducting qubit. Here we design and build an engineered on-chip reservoir that acts as an efficient bolometer for detecting the Josephson radiation under non-equilibrium (biased) conditions. The bolometer converts ac Josephson current at microwave frequencies, up to about 100GHz, into a measurable dc temperature rise. The present experiment demonstrates an efficient, wide-band, thermal detection scheme of microwave photons and provides a sensitive detector of Josephson dynamics beyond the standard conductance measurements. Using a circuit model, we capture both the current-voltage characteristics and the measured power quantitatively.
Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.
Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.
Current-biased Josephson junctions can act as detectors of electromagnetic radiation. At optimal conditions, their sensitivity is limited by fluctuations causing stochastic switching from the superconducting to the resistive state. This work provides a quantitative description of a stochastic switching current detector, based on an underdamped Josephson junction. It is shown that activation of a Josephson plasma resonance can greatly enhance the detector responsivity in proportion to the quality factor of the junction. The ways of tuning the detector for achieving optimal operation are discussed. For realistic parameters of Nb / Al O x / Nb tunnel junctions, the sensitivity and noise-equivalent power (NEP) can reach values of S ≃ 5 × 10 12 (V/W) and NEP ≃ 2 × 10 − 23 ( WHz − 1 / 2 ), respectively. These outstanding characteristics facilitate both bolometric and single-photon detection in microwave and terahertz ranges. Published by the American Physical Society 2024
The strong interaction of superconducting integrated circuits with microwave photons forms the basis of circuit quantum electrodynamics (cQED), an attractive paradigm for scalable quantum computing and a test bed for quantum optics in the strong coupling regime [1–6]. While singlephoton detectors are an important component of the standard quantum optics toolbox [7], they have not played a role in cQED, as there are no microwave photon counters currently available. In the search for a microwave component that will emulate the nonlinearity of traditional optical photon counters, it is natural to consider the Josephson junction—a nonlinear, nondissipative superconducting circuit element with tunable microwave-frequency transitions. There has been recent interest in the development of on-chip detectors to probe the microwave radiation emitted by mesoscopic quantum circuits [8–14], including proposals to utilize Josephson circuits as photon counters in the context of cQED [8,9]. This study represents the first experimental measurement of the coincidence counting statistics of microwave photons. We exploit microwaveinduced transitions between discrete energy levels in a Josephson junction to realize an efficient, versatile microwave detector. Moreover, we use a parallelized detector circuit to probe the counting statistics of both coherent and thermal microwave sources. Acircuitdiagramofthesingle-channeldetectorisshown in Fig. 1(a). The Josephson junction is current biased near thecriticalcurrent I0.Thejunctionpotentialenergyisgiven by Uð� Þ¼� I
Sensitive and reliable photon detectors are ubiquitous tools in countless fields of engineering and the sciences. One of the most mature and widely applied approaches to photodetection is bolometry, where the absorption of radiation causes a measurable change in the temperature of the absorber material. Applications of bolometry include fields such as astrophysics, medicine, particle physics, and metrology, all of which greatly benefit from the development of more versatile and efficient detectors. In the field of superconducting quantum circuits, considerable progress has recently been made in developing ultrasensitive superconducting bolometers. Operating in the single-photon regime, these devices hold great potential for several applications within quantum technology, including qubit state measurement and characterization of microwave components and cryogenic environments. State-of-the-art bolometers based on graphene have been shown to reach sufficient energy resolution and operation speed to be applicable in the context of circuit quantum electrodynamics. In this thesis, a superconducting bolometer based on superconductor-normal-metal-superconductor Josephson junctions is studied. In particular, a detection protocol based on optimal filtering of the noisy detector output signal is implemented to detect microwave pulses during continuous operation of the device. The fidelity of the implemented real-time detection scheme is experimentally tested and compared to the theoretical energy resolution of the studied bolometer, computed from noise equivalent power. The device is found to reach 50% detection probability with minimal dark-count rate at pulse energies of approximately 2.2 zJ, exceeding the predicted resolution of 0.75 zJ by only a factor of three. In addition, the characteristic energy of the detector is determined to be approximately 1.5 zJ based on the total energy of pulses detected with fidelity F=0.5. The results give hope of future applications of the detection scheme to more sensitive bolometer samples.