Continuous-variable quantum key distribution (CV-QKD) with plug-and-play design offers a promising route in simplifying the system implementation and shows intriguing prospects for quantum access network applications. However, such a scheme makes it possible for the eavesdropper (Eve) to completely control the source, helping her to gain more information since the laser travels through the unsecured channel before being modulated, which will severely compromise the performance of the system and limit its potential application. To fight against the security loophole, we propose a passive source monitoring scheme based on a combination of beam splitter and homodyne detector, as well as source noise suppression. The corresponding entanglement-based model is established to estimate the secret key rate for the proposed scheme. We show that the performance of the plug-and-play CV-QKD system can be significantly improved by using the source monitoring scheme compared with the untrusted source model. With typical parameters, the maximum transmission distance can be promoted by more than 50%, and the secret key rate can be increased by more than 25% when the transmission distance is longer than 50 km. This study provides a feasible approach for improving the security and performance of the plug-and-play CV-QKD and holds positive potential for practical applications.
Continuous-variable quantum key distribution (CV-QKD) with plug-and-play design offers a promising route in simplifying the system implementation and shows intriguing prospects for quantum access network applications. However, such a scheme makes it possible for the eavesdropper (Eve) to completely control the source, helping her to gain more information since the laser travels through the unsecured channel before being modulated, which will severely compromise the performance of the system and limit its potential application. To fight against the security loophole, we propose a passive source monitoring scheme based on a combination of beam splitter and homodyne detector, as well as source noise suppression. The corresponding entanglement-based model is established to estimate the secret key rate for the proposed scheme. We show that the performance of the plug-and-play CV-QKD system can be significantly improved by using the source monitoring scheme compared with the untrusted source model. With typical parameters, the maximum transmission distance can be promoted by more than 50%, and the secret key rate can be increased by more than 25% when the transmission distance is longer than 50 km. This study provides a feasible approach for improving the security and performance of the plug-and-play CV-QKD and holds positive potential for practical applications.
The source noise in plug-and-play continuous variable quantum key distribution (CV-QKD) system plays a crucial role in determining the secret key rate and transmission distance. In general, the source noise is considered untrusted and fully controlled by Eve, which is because the laser travels through the unsecure channel before being modulated. However, this may overestimate the key information stolen by Eve leading to an underestimation of the key rate share between the legal communication parties. Here, we use a beam-splitter with signal attenuation to model the source noise combined with source monitoring scheme to characterize the source imperfection in the plug-and-play CV-QKD system. We show that the performance of the plug-and-play CV-QKD can be significantly improved under the above scheme compared to the untrusted source model. Our numerical simulation results also show that the plug-and-play CV-QKD with source monitoring has a key generation rate close to that of a trusted source under the same simulation parameters.
Continuous-variable quantum key distribution (CV-QKD) enables two remote parties to establish information-theoretically secure keys and offers high practical feasibility due to its compatibility with mature coherent optical communication technologies. However, as CV-QKD systems progress toward digital implementations, device nonidealities drive the optical field from a single-mode to a continuous-mode region, thereby underscoring the mismatch between theoretical models and practical systems. Here, we introduce temporal modes to construct an entanglement-based scheme that more accurately captures device nonidealities and develop a corresponding secret key rate calculation method applicable to continuous-mode scenarios. We demonstrate that optimizing the pulse-shaping format can significantly improve performance under detector-bandwidth-limited conditions. Experimental results also confirm that the proposed model effectively describes the impact of sampling-time deviations. We further analyze a linear weighted-reconstruction digital signal processing method,which improves the secret key rate by approximately 50% in a 30-km fiber experiment without requiring additional hardware, demonstrating a substantial performance enhancement at metropolitan distances. The proposed theoretical framework accommodates a broader range of experimental conditions and can guide the optimization of digital CV-QKD systems.
Integrated quantum key distribution (QKD) systems based on photonic chips have high scalability and stability, and are promising for further construction of global quantum communications networks. On-chip quantum light sources are a critical component of a fully integrated QKD system; especially a continuous-variable QKD (CV-QKD) system based on coherent detection, which has extremely high requirements for the light sources. Here, for what we believe is the first time, we designed and fabricated two on-chip tunable lasers for CV-QKD, and demonstrated a high-performance system based on these sources. Because of the high output power, fine tunability, and narrow linewidth, the involved on-chip lasers guarantee the accurate shot-noise-limited detection of quantum signals, center wavelength alignment of nonhomologous lasers, and suppression of untrusted excess noise. The system’s secret key rate can reach 0.75 Mb/s at a 50 km fiber distance, and the secure transmission distance can exceed 100 km. Our results mark a breakthrough toward building a fully integrated CV-QKD, and pave the way for a reliable and efficient terrestrial quantum-secure metropolitan area network.
Plug-and-play discrete modulation continuous variable quantum key distribution can generate local oscillator light locally without using two independent lasers, and both signal light and local oscillator are generated from the same laser, which can effectively ensure the practical security of the system and have a completely identical frequency characteristic. In addition, this scheme has good compatibility with efficient error correction codes, and can achieve high reconciliation efficiency even at low signal-to-noise ratio. However, there exists large excess noise in the plug-and-play configuration based on the untrusted source model, which seriously limits the maximum transmission distance of the discrete modulation scheme. To solve this problem, we propose a plug-and-play discrete modulation continuous variable quantum key distribution based on non-Gaussian state-discrimination detection. That is to say, a non-Gaussian state-discrimination detector is deployed at the receiver. With adaptive measurement method and Bayesian inference, four non-orthogonal coherent states which are based on four-state discrete modulation can be unconditionally distinguished on condition that the error probability is lower than the standard quantum limit. We analyze the security of the proposed protocol by considering both asymptotic limit and finite-size effect. Simulation results show that the secret key rate and maximum transmission distance are significantly enhanced by using no-Gaussian state-discrimination detection even under the influence of the untrusted source noise compared with the original plug-and-play discrete modulation continuous variable quantum key distribution. These results indicate that the proposed scheme can effectively reduce the negative influence of the untrust source noise on the performance of the plug-and-play discrete modulation continuous variable quantum key distribution protocol. The proposed protocol can not only ensure the practical security of the system, but also achieve more efficient and longer transmission distance quantum key distribution.
Abstract Source monitoring is a matter of vital importance for continuous-variable quantum key distribution (QKD), since it is the first barrier to ensure the practical security. In a practical scenario, the difficulty arises with the existence of the laser intensity fluctuation, which not only contributes to the source noise but also causes the deviation of source monitoring result. We first illustrate the effect of the relative intensity noise (RIN) on the ultimate security by explicitly showing the parameter estimation procedure, and find that the secret key rate is overestimated in this situation. To defend the continuous-variable QKD system against potential attacks utilizing this impairment to conceal itself, a source monitoring scheme is devised by adopting the seminal one-time shot-noise unit calibration approach into the monitor module. It is shown that by using the practical source monitoring scheme the impact of the RIN can be modeled and monitored in real time to circumvent an overestimated secret key rate. This scheme also lowers the system complexity thus is suitable for widespread application.
Continuous-variable measurement-device-independent quantum key distribution (CV-MDI QKD) can fundamentally defend all attacks on the measurement devices. Consequently, higher requirements are put forward for the source of a CV-MDI QKD system. However, the imperfections of the actual source brings practical security risks to the CV-MDI QKD system. Therefore, the characteristics of the realistic source must be controlled in real time to guarantee the practical security of the CV-MDI QKD system. Here we propose a countermeasure for negative impact introduced by the actual source in the CV-MDI QKD system based on the one-time-calibration method, not only eliminating the loophole induced from the relative intensity noise (RIN), which is part of the source noise, but also modeling the source noise thus improves the performance. In particular, three cases in terms of whether the preparation noise of the practical sources are defined or not, where only one of the users or both of the two users operate monitoring on their respective source outputs, are investigated. The simulation results show that the estimated secret key rate without our proposed scheme is about 10.7 times higher than the realistic rate at 18 km transmission distance when the variance of RIN is only 0.4. What is worse, the difference becomes greater and greater with the increase of the variance of RIN. Thus, our proposed scheme makes sense in further completing the practical security of the CV-MDI QKD system. In other words, our work enables the CV-MDI QKD system not only to resist all attacks against detectors, but also to close the vulnerability caused by the actual source, thus making the scheme closer to practical security.