Josephson Junctions are important components in superconducting qubits. It introduces anharmonicity to the energy level spacings of the qubit which allow us to identify two unique quantum energy states for computing. It is difficult to fabricate multiple junctions within the same desired parameter range. Characterisation of the junctions is, therefore, a necessary step after fabrication. In particular, the critical current of the junctions is determined by measuring their normal state resistance. This is done via two-point or four-point resistance measurement at a manual probe station which is a time-consuming process, especially for wafer-scale fabrication. This bottleneck can be circumvented by automation with object detection. The base of the automated probe station is a 3D printer modified with multiple Arduino Uno microcontrollers and motorized linear stages. The automation process is achieved via auto-alignment of the probes and an automatic measurement procedure. As a result, the fully automated process will take about 27–29[Formula: see text]s to measure the resistance of one junction which saves 28%–51% of the time compared to the manual probe station and can be unsupervised. Due to the reuse of a commercial 3D printer, the cost of this system is 800 SGD which is much less than comparable commercial solutions.

arXiv:2310.00331International Journal of Quantum InformationSep 18, 20230 citations

Designing and building a permanent magnet Zeeman slower for calcium atoms using a 3D printer

Alexandria Parsagian, Michaela Kleinert

We present the design of a Zeeman slower for calcium atoms using permanent magnets instead of more traditional electromagnets and the novel technique of 3D printing to create a very robust and flexible structure for these magnets. Zeeman slowers are ideal tools to slow atoms from several hundreds of meters per second to just a few tens of meters per second. These slower atoms can then easily be trapped in a magneto-optical trap, making Zeeman slowers a very valuable tool in many cold atom labs. The use of permanent magnets and 3D printing results in a highly stable and robust slower that is suitable for undergraduate laboratories. In our design, we arranged 28 magnet pairs, 2.0 cm apart along the axis of the slower and at varying radial distances from the axis. We determined the radial position of the magnets by simulating the combined field of all magnet pairs using Mathematica and comparing it to the ideal theoretical field for a Zeeman slower. Finally, we designed a stable, robust, compact, and easy-to-align mounting structure for the magnets in Google Sketchup, which we then printed using a commercially available 3D printer by Solidoodle. The resulting magnetic field is well suited to slow calcium atoms from the 770 m/s rms velocity at a temperature of 950 K, down to the capture velocity of the magneto-optical trap.

American Journal of PhysicsSep 21, 20157 citations