Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics Research

Superconducting single-photon detector with a speed of 5 GHz and a photon number resolution of 61

Tianzhu Zhang, Jia Huang, Xingyu Zhang, Chaomeng Ding, Huiqin Yu, You Xiao, Chaolin Lv, Xiaoyu Liu, Zhen Wang, Lixing You, Xiaoming Xie, Hao Li

Published Apr 15, 2024• 34 citations
Publisher

Abstract

Rapid detection and discrimination of single photons are pivotal in various applications, such as deep-space laser communication, high-rate quantum key distribution, and optical quantum computation. However, conventional single-photon detectors (SPDs), including semiconducting and recently developed superconducting detectors, have limited detection speed and photon number resolution (PNR), which pose significant challenges in practical applications. In this paper, we present an efficient, fast SPD with good PNR, which has 64 paralleled, sandwiched superconducting nanowires fabricated on a distributed Bragg reflector. The detector is operated in a compact Gifford–McMahon cryocooler that supports 64 electrical channels and has a minimum working temperature of 2.3 K. The combined detector system shows a functional nanowire yield of 61/64, a system detection efficiency of 90% at 1550 nm, and a maximum count rate of 5.2 GHz. Additionally, it has a maximum PNR of 61, corresponding to the operating nanowires. This SPD signifies a substantial improvement in quantum detector technology, with potential applications in deep-space laser communication, high-speed quantum communication, and fundamental quantum optics experiments.

DOI
10.1364/prj.522714

Related papers

Photon-Number-Resolving Single-Photon Detector with a System Detection Efficiency of 98% and Photon-Number Resolution of 32

Chaomeng Ding, Xing-Yu Zhang, Jia-Min Xiong +8 more

High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.

arXiv:2504.02202•ACS Photonics•Jul 4, 2025•18 citations

Superconducting nanowire single photon detector with efficiency over 90% at 2 μm wavelength

Zhen Wan, Jia Huang, Guangzhao Xu +6 more

Abstract We here report a high system detection efficiency (SDE) superconducting single-photon detector (SSPD) at 2 μm wavelength. The device integrates a SiO 2 /Ta 2 O 5 distributed Bragg reflector (DBR) and a sandwich-structured double-layer NbN nanowire to enhance the optical absorption efficiency. A cold development technique is implemented to optimize the superconducting nanowires with sub-40-nm linewidths, thus enhancing the intrinsic detection efficiency (IDE). The fabricated SSPD shows an SDE exceeding 90% at 2 μm wavelength. Moreover, the detector allows an operational working temperature of 2.2 K provided by a compact GM cryo-cooler. This detector delivers excellent performance at the 2 μm wavelength, and its optimized structural design implies promising potential for extending detection toward longer infrared bands. It thus holds value for advancing high-sensitivity quantum technologies, mid-infrared optical communications, and dark matter detection research.

Chinese Physics B•Nov 5, 2025•0 citations

A high speed and high efficiency superconducting photon number resolving detector

Tao Xu, Shi Chen, Yajun Chen +8 more

Abstract A series superconducting nanowire single-photon detector is a high performance nanowire array detector that has the potential to reach a high system detection efficiency (SQE), a high counting rate (CR) and photon number resolving functionality. Interconnected with a simplified readout, it shows promise for large scale expansion and has good prospects for future applications in single-photon imaging, quantum optics, quantum computing and deep-space communication. In this paper, we demonstrate a high SQE and CR series superconducting nanowire single-photon detector with an active area of 20 × 20 μ m 2 . The detector shows a maximum SQE of 68% at 1550 nm with a dark count rate of 200 Hz and a wide response wavelength from 1100–2000 nm. It also achieves a CR over 300 MHz at single photon power level and has the capability of resolving photon numbers by up to six photons.

Superconductor Science and Technology•Feb 15, 2019•22 citations

Superconducting single-photon detector with a system efficiency of 93% operated in a 2.4 K space-application-compatible cryocooler

Peng Hu, Yuexue Ma, Hao Li +8 more

Abstract We report herein the development of a superconducting nanowire single-photon detector (SNSPD) that uses a hybrid cryocooler compatible with space applications. The hybrid cryocooler incorporates a two-stage high-frequency pulse-tube cryocooler and a Joule–Thomson loop, which produces a minimum temperature of 2.2 K. The SNSPD with the structure of sandwiched nanowires integrated in the cryocooler shows a maximum detection efficiency of 93% at 1550 nm, which makes it promising for deep-space communications and quantum information applications.

Superconductor Science and Technology•May 19, 2021•15 citations

Superconducting nanowire single photon detectors operating at temperature from 4 to 7 K

Ronan Gourgues, Johannes W. N. Los, Julien Zichi +6 more

We experimentally investigate the performance of NbTiN superconducting nanowire single photon detectors above the base temperature of a conventional Gifford-McMahon cryocooler (2.5 K). By tailoring design and thickness (8 - 13 nm) of the detectors, high performance, high operating temperature, single-photon detection from the visible to telecom wavelengths are demonstrated. At 4.3 K, a detection efficiency of 82 % at 785 nm wavelength and a timing jitter of 30 ± 0.3 ps are achieved. In addition, for 1550 nm and similar operating temperature we measured a detection efficiency as high as 64 %. Finally, we show that at temperatures up to 7 K, unity internal efficiency is maintained for the visible spectrum. Our work is particularly important to allow for the large scale implementation of superconducting single photon detectors in combination with heat sources such as free-space optical windows, cryogenic electronics, microwave sources and active optical components for complex quantum optical experiments and bio-imaging.

arXiv:1906.09969•Optics Express•Aug 14, 2019•35 citations

Superconducting single photon detectors for ultrasensitive visible and IR detection

R. Espiau de Lamaëstre, L. Maingault, Laurent Frey +5 more

Superconducting single photons detectors (SSPDs) have emerged in recent years as a promising alternative for fast and sensitive infrared detectors working in the photon counting mode. In particular, those detectors combine very low dark count rates (below 1 Hz), high speed (above 1 GHz), photon number resolution and reasonable quantum efficiency (10% at telecom wavelengths). They already found applications in quantum cryptography systems and integrated circuit failure analysis, but could also be used as ultimate sensors in matrix configurations. We show here the optimization of SSPD fabrication and their optical metrology at CEA. SSPD are fabricated by patterning a 80 nm wide nanowire in a very thin (4 nm) NbN film on sapphire, forming a pixel of several microns size. A cryogenic all-fibered optoelectronic system has been developed and allows precise metrology of the optical performances of SSPD. When biasing near the critical current of the nanowire, we demonstrate a detection quantum efficiency of 8% at 1.55 µm, which is also found to be strongly polarization dependent. This quantum efficiency being limited by optical absorption, we propose a prism coupling based absorption enhancing structure that allows reaching 100% quantum efficiency.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 22, 2009•3 citations
Rapid detection and discrimination of single photons are pivotal in various applications, such as deep-space laser communication, high-rate quantum key distribution, and optical quantum computation. However, conventional single-photon detectors (SPDs), including semiconducting and recently developed superconducting detectors, have limited detection speed and photon number resolution (PNR), which pose significant challenges in practical applications. In this paper, we present an efficient, fast SPD with good PNR, which has 64 paralleled, sandwiched superconducting nanowires fabricated on a distributed Bragg reflector. The detector is operated in a compact Gifford–McMahon cryocooler that supports 64 electrical channels and has a minimum working temperature of 2.3 K. The combined detector system shows a functional nanowire yield of 61/64, a system detection efficiency of 90% at 1550 nm, and a maximum count rate of 5.2 GHz. Additionally, it has a maximum PNR of 61, corresponding to the operating nanowires. This SPD signifies a substantial improvement in quantum detector technology, with potential applications in deep-space laser communication, high-speed quantum communication, and fundamental quantum optics experiments.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.
Abstract We here report a high system detection efficiency (SDE) superconducting single-photon detector (SSPD) at 2 μm wavelength. The device integrates a SiO 2 /Ta 2 O 5 distributed Bragg reflector (DBR) and a sandwich-structured double-layer NbN nanowire to enhance the optical absorption efficiency. A cold development technique is implemented to optimize the superconducting nanowires with sub-40-nm linewidths, thus enhancing the intrinsic detection efficiency (IDE). The fabricated SSPD shows an SDE exceeding 90% at 2 μm wavelength. Moreover, the detector allows an operational working temperature of 2.2 K provided by a compact GM cryo-cooler. This detector delivers excellent performance at the 2 μm wavelength, and its optimized structural design implies promising potential for extending detection toward longer infrared bands. It thus holds value for advancing high-sensitivity quantum technologies, mid-infrared optical communications, and dark matter detection research.
Abstract A series superconducting nanowire single-photon detector is a high performance nanowire array detector that has the potential to reach a high system detection efficiency (SQE), a high counting rate (CR) and photon number resolving functionality. Interconnected with a simplified readout, it shows promise for large scale expansion and has good prospects for future applications in single-photon imaging, quantum optics, quantum computing and deep-space communication. In this paper, we demonstrate a high SQE and CR series superconducting nanowire single-photon detector with an active area of 20 × 20 μ m 2 . The detector shows a maximum SQE of 68% at 1550 nm with a dark count rate of 200 Hz and a wide response wavelength from 1100–2000 nm. It also achieves a CR over 300 MHz at single photon power level and has the capability of resolving photon numbers by up to six photons.
Abstract We report herein the development of a superconducting nanowire single-photon detector (SNSPD) that uses a hybrid cryocooler compatible with space applications. The hybrid cryocooler incorporates a two-stage high-frequency pulse-tube cryocooler and a Joule–Thomson loop, which produces a minimum temperature of 2.2 K. The SNSPD with the structure of sandwiched nanowires integrated in the cryocooler shows a maximum detection efficiency of 93% at 1550 nm, which makes it promising for deep-space communications and quantum information applications.
We experimentally investigate the performance of NbTiN superconducting nanowire single photon detectors above the base temperature of a conventional Gifford-McMahon cryocooler (2.5 K). By tailoring design and thickness (8 - 13 nm) of the detectors, high performance, high operating temperature, single-photon detection from the visible to telecom wavelengths are demonstrated. At 4.3 K, a detection efficiency of 82 % at 785 nm wavelength and a timing jitter of 30 ± 0.3 ps are achieved. In addition, for 1550 nm and similar operating temperature we measured a detection efficiency as high as 64 %. Finally, we show that at temperatures up to 7 K, unity internal efficiency is maintained for the visible spectrum. Our work is particularly important to allow for the large scale implementation of superconducting single photon detectors in combination with heat sources such as free-space optical windows, cryogenic electronics, microwave sources and active optical components for complex quantum optical experiments and bio-imaging.
Superconducting single photons detectors (SSPDs) have emerged in recent years as a promising alternative for fast and sensitive infrared detectors working in the photon counting mode. In particular, those detectors combine very low dark count rates (below 1 Hz), high speed (above 1 GHz), photon number resolution and reasonable quantum efficiency (10% at telecom wavelengths). They already found applications in quantum cryptography systems and integrated circuit failure analysis, but could also be used as ultimate sensors in matrix configurations. We show here the optimization of SSPD fabrication and their optical metrology at CEA. SSPD are fabricated by patterning a 80 nm wide nanowire in a very thin (4 nm) NbN film on sapphire, forming a pixel of several microns size. A cryogenic all-fibered optoelectronic system has been developed and allows precise metrology of the optical performances of SSPD. When biasing near the critical current of the nanowire, we demonstrate a detection quantum efficiency of 8% at 1.55 µm, which is also found to be strongly polarization dependent. This quantum efficiency being limited by optical absorption, we propose a prism coupling based absorption enhancing structure that allows reaching 100% quantum efficiency.