Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Coherent feedback enhanced quantum-dense metrology in a lossy environment

Xinyun Liang, Jie Zhao, Yuhan Yan, Wenfeng Huang, Chun-Hua Yuan, L. Q. Chen

Published Mar 13, 2024• 3 citations
Publisher

Abstract

Quantum dense metrology (QDM) performs high-precision measurements by a two-mode entangled state created by an optical parametric amplifier (PA), where one mode is a meter beam and the other is a reference beam. In practical applications, the photon losses of meter beam are unavoidable, resulting in a degradation of the sensitivity. Here, we employ coherent feedback that feeds the reference beam back into the PA by a beam splitter to enhance the sensitivity in a lossy environment. The results show that the sensitivity is enhanced significantly by adjusting the splitting ratio of the beam splitter. This method may find its potential applications in QDM. Furthermore, such a strategy that two non-commuting observables are simultaneous measurements could provide a new way to individually control the noise-induced random drift in phase or amplitude of the light field, which would be significant for stabilizing the system and long-term precision measurement.

DOI
10.1364/oe.519044

Related papers

Quantum metrology with parametric amplifier-based photon correlation interferometers

Florian Hudelist, Jia Kong, Cunjin Liu +3 more

Conventional interferometers usually utilize beam splitters for wave splitting and recombination. These interferometers are widely used for precision measurement. Their sensitivity for phase measurement is limited by the shot noise, which can be suppressed with squeezed states of light. Here we study a new type of interferometer in which the beam splitting and recombination elements are parametric amplifiers. We observe an improvement of 4.1±0.3 dB in signal-to-noise ratio compared with a conventional interferometer under the same operating condition, which is a 1.6-fold enhancement in rms phase measurement sensitivity beyond the shot noise limit. The improvement is due to signal enhancement. Combined with the squeezed state technique for shot noise suppression, this interferometer promises further improvement in sensitivity. Furthermore, because nonlinear processes are involved in this interferometer, we can couple a variety of different waves and form new types of hybrid interferometers, opening a door for many applications in metrology. Interferometers play a key role in precision measurements and metrology. Here, the authors demonstrate a new type of interferometer that replaces the standard beam splitter elements with parametric amplifiers, which provides enhanced performance compared with a Mach–Zehnder interferometer.

Nature Communications•Jan 29, 2014•438 citations

Quantum dense metrology by an SU(2)-in-SU(1,1) nested interferometer

Wei Du, J. F. Chen, Z. Y. Ou +1 more

With the help of quantum entanglement, quantum dense metrology (QDM) is a technique that can make joint estimates of two conjugate quantities such as phase and amplitude modulations of an optical field, with an accuracy beating the standard quantum limit simultaneously. SU(1,1) interferometers (SUIs) can realize QDM with detection loss tolerance but is limited in absolute sensitivity. Here, we present a QDM scheme with a linear or SU(2) interferometer nested inside an SUI. By using a degenerate SUI and controlling the phase angle of the phase-sensitive amplifiers in the SUI, we can achieve the optimum quantum enhancement in the measurement precision of an arbitrary mixture of phase and amplitude modulation.

arXiv:2002.02195•Applied Physics Letters•Jul 13, 2020•22 citations

Quantum-Dense Metrology

S. Steinlechner, J. Bauchrowitz, M. Meinders +3 more

Quantum metrology utilizes entanglement for improving the sensitivity of measurements. Up to now the focus has been on the measurement of just one out of two non-commuting observables. Here we demonstrate a laser interferometer that provides information about two non-commuting observables, with uncertainties below that of the meter's quantum ground state. Our experiment is a proof-of-principle of quantum dense metrology, and uses the additional information to distinguish between the actual phase signal and a parasitic signal due to scattered and frequency shifted photons. Our approach can be readily applied to improve squeezed-light enhanced gravitational-wave detectors at non-quantum noise limited detection frequencies in terms of a sub shot-noise veto-channel.

arXiv:1211.3570•Nov 15, 2012•0 citations

Phase estimation via photon subtraction at the output of the hybrid interferometer

Qisi Zhou, Tao Jiang, Qingqian Kang +4 more

The hybrid interferometer, integrating an optical parametric amplifier and a beam splitter, exhibits the potential to outperform the SU(1,1) interferometer. However, photon loss remains a key constraint for practical implementation. To address this challenge, we propose a quantum metrology scheme that utilizes multi-photon subtraction at the output and replaces the standard 50:50 beam splitter with a variable beam splitter—thereby enhancing robustness to photon loss. We adopt a coherent state (injected into mode a or b ) and a vacuum state as inputs to the interferometer, while performing homodyne detection. Our results demonstrate that the selection of input modes exerts a significant influence on phase estimation, and the optimization of the beam splitter’s transmittance is essential to maximize phase sensitivity under lossy conditions. Furthermore, photon subtraction notably enhances phase sensitivity, quantum Fisher information, and noise robustness. Notably, our scheme attains sensitivities exceeding the Heisenberg limit even in the presence of 20% photon loss.

arXiv:2510.17349•Optics Express•Jun 8, 2026•0 citations

Experimental realization of a feedback optical parametric amplifier with four-wave mixing

Xiaozhou Pan, Hui Chen, Tianxiang Wei +5 more

Optical parametric amplifiers (OPAs) play a fundamental role in the generation of quantum correlation for quantum information processing and quantum metrology. In order to increase the communication fidelity of the quantum information protocol and the measurement precision of quantum metrology, it requires a high degree of quantum correlation. In this Rapid Communication we report a feedback optical parametric amplifier that employs a four-wave mixing (FWM) process as the underlying OPA and a beam splitter as the feedback controller. We first construct a theoretical model for this feedback-based FWM process and experimentally study the effect of the feedback control on the quantum properties of the system. Specifically, we find that the quantum correlation between the output fields can be enhanced by tuning the strength of the feedback.

Physical review. B./Physical review. B•Apr 26, 2018•36 citations

Research on intensity–difference squeezing enhancement of phase-sensitive amplifier based on coherent feedback

Tingting Liu, Xiao-Hua Yang, Yashuai Han +1 more

The intensity-difference squeezed state is an important concept in quantum optics, which is not only of great significance for fundamental research in quantum physics, but also an important quantum resource in the fields of quantum communication, quantum computing, and quantum precision measurement. The optical parametric amplifier based on atomic four-wave mixing is one of the most effective means to achieve intensity-difference squeezed light. However, due to the absorption loss of atomic vapor in the light field, the output squeezing still needs improving. By feeding the non-classical optical field from the optical parametric amplifier back to the input port, the quantum characteristics of its output optical field can be enhanced. However, the intensity-difference squeezing enhancement from a phase-insensitive amplifier is experimentally realized based on coherent feedback control. The intensity-difference squeezing enhancement of the phase-sensitive amplifier has not been discussed. In this work, a two-port coherent feedback-controlled phase-sensitive amplifier is analyzed theoretically. The dependence of the intensity-difference squeezing, respectively, on the feedback intensity, the intensity gain of the optical parametric amplifier, and the losses of the system are investigated. For the ideal case in which the losses of the system are ignored, infinite squeezing can be achieved by adjusting the strength and phase of feedback. Considering the actual atomic absorption losses, squeezing enhancement can also be achieved over a wide range of intensity gains within a certain feedback intensity range. In addition, the squeezing enhancement is quite efficient for the medium intensity gain range. The intensity-difference squeezing enhancement strongly depends on the absorption loss of atomic vapor. The smaller the absorption loss, the more significant the squeezing enhancement effect is. Furthermore, the experimental feasibility of this scheme is also considered in detail. Our research can provide useful references for achieving high-quality non classical light fields in experiment, which may find applications in quantum information processing and quantum precise measurement.

Acta Physica Sinica•Jan 1, 2024•0 citations
Quantum dense metrology (QDM) performs high-precision measurements by a two-mode entangled state created by an optical parametric amplifier (PA), where one mode is a meter beam and the other is a reference beam. In practical applications, the photon losses of meter beam are unavoidable, resulting in a degradation of the sensitivity. Here, we employ coherent feedback that feeds the reference beam back into the PA by a beam splitter to enhance the sensitivity in a lossy environment. The results show that the sensitivity is enhanced significantly by adjusting the splitting ratio of the beam splitter. This method may find its potential applications in QDM. Furthermore, such a strategy that two non-commuting observables are simultaneous measurements could provide a new way to individually control the noise-induced random drift in phase or amplitude of the light field, which would be significant for stabilizing the system and long-term precision measurement.
Conventional interferometers usually utilize beam splitters for wave splitting and recombination. These interferometers are widely used for precision measurement. Their sensitivity for phase measurement is limited by the shot noise, which can be suppressed with squeezed states of light. Here we study a new type of interferometer in which the beam splitting and recombination elements are parametric amplifiers. We observe an improvement of 4.1±0.3 dB in signal-to-noise ratio compared with a conventional interferometer under the same operating condition, which is a 1.6-fold enhancement in rms phase measurement sensitivity beyond the shot noise limit. The improvement is due to signal enhancement. Combined with the squeezed state technique for shot noise suppression, this interferometer promises further improvement in sensitivity. Furthermore, because nonlinear processes are involved in this interferometer, we can couple a variety of different waves and form new types of hybrid interferometers, opening a door for many applications in metrology. Interferometers play a key role in precision measurements and metrology. Here, the authors demonstrate a new type of interferometer that replaces the standard beam splitter elements with parametric amplifiers, which provides enhanced performance compared with a Mach–Zehnder interferometer.
With the help of quantum entanglement, quantum dense metrology (QDM) is a technique that can make joint estimates of two conjugate quantities such as phase and amplitude modulations of an optical field, with an accuracy beating the standard quantum limit simultaneously. SU(1,1) interferometers (SUIs) can realize QDM with detection loss tolerance but is limited in absolute sensitivity. Here, we present a QDM scheme with a linear or SU(2) interferometer nested inside an SUI. By using a degenerate SUI and controlling the phase angle of the phase-sensitive amplifiers in the SUI, we can achieve the optimum quantum enhancement in the measurement precision of an arbitrary mixture of phase and amplitude modulation.
Quantum metrology utilizes entanglement for improving the sensitivity of measurements. Up to now the focus has been on the measurement of just one out of two non-commuting observables. Here we demonstrate a laser interferometer that provides information about two non-commuting observables, with uncertainties below that of the meter's quantum ground state. Our experiment is a proof-of-principle of quantum dense metrology, and uses the additional information to distinguish between the actual phase signal and a parasitic signal due to scattered and frequency shifted photons. Our approach can be readily applied to improve squeezed-light enhanced gravitational-wave detectors at non-quantum noise limited detection frequencies in terms of a sub shot-noise veto-channel.
The hybrid interferometer, integrating an optical parametric amplifier and a beam splitter, exhibits the potential to outperform the SU(1,1) interferometer. However, photon loss remains a key constraint for practical implementation. To address this challenge, we propose a quantum metrology scheme that utilizes multi-photon subtraction at the output and replaces the standard 50:50 beam splitter with a variable beam splitter—thereby enhancing robustness to photon loss. We adopt a coherent state (injected into mode a or b ) and a vacuum state as inputs to the interferometer, while performing homodyne detection. Our results demonstrate that the selection of input modes exerts a significant influence on phase estimation, and the optimization of the beam splitter’s transmittance is essential to maximize phase sensitivity under lossy conditions. Furthermore, photon subtraction notably enhances phase sensitivity, quantum Fisher information, and noise robustness. Notably, our scheme attains sensitivities exceeding the Heisenberg limit even in the presence of 20% photon loss.
Optical parametric amplifiers (OPAs) play a fundamental role in the generation of quantum correlation for quantum information processing and quantum metrology. In order to increase the communication fidelity of the quantum information protocol and the measurement precision of quantum metrology, it requires a high degree of quantum correlation. In this Rapid Communication we report a feedback optical parametric amplifier that employs a four-wave mixing (FWM) process as the underlying OPA and a beam splitter as the feedback controller. We first construct a theoretical model for this feedback-based FWM process and experimentally study the effect of the feedback control on the quantum properties of the system. Specifically, we find that the quantum correlation between the output fields can be enhanced by tuning the strength of the feedback.
The intensity-difference squeezed state is an important concept in quantum optics, which is not only of great significance for fundamental research in quantum physics, but also an important quantum resource in the fields of quantum communication, quantum computing, and quantum precision measurement. The optical parametric amplifier based on atomic four-wave mixing is one of the most effective means to achieve intensity-difference squeezed light. However, due to the absorption loss of atomic vapor in the light field, the output squeezing still needs improving. By feeding the non-classical optical field from the optical parametric amplifier back to the input port, the quantum characteristics of its output optical field can be enhanced. However, the intensity-difference squeezing enhancement from a phase-insensitive amplifier is experimentally realized based on coherent feedback control. The intensity-difference squeezing enhancement of the phase-sensitive amplifier has not been discussed. In this work, a two-port coherent feedback-controlled phase-sensitive amplifier is analyzed theoretically. The dependence of the intensity-difference squeezing, respectively, on the feedback intensity, the intensity gain of the optical parametric amplifier, and the losses of the system are investigated. For the ideal case in which the losses of the system are ignored, infinite squeezing can be achieved by adjusting the strength and phase of feedback. Considering the actual atomic absorption losses, squeezing enhancement can also be achieved over a wide range of intensity gains within a certain feedback intensity range. In addition, the squeezing enhancement is quite efficient for the medium intensity gain range. The intensity-difference squeezing enhancement strongly depends on the absorption loss of atomic vapor. The smaller the absorption loss, the more significant the squeezing enhancement effect is. Furthermore, the experimental feasibility of this scheme is also considered in detail. Our research can provide useful references for achieving high-quality non classical light fields in experiment, which may find applications in quantum information processing and quantum precise measurement.