Quantum sensing is a quantum technology for ultrasensitive detection, which is particularly useful for sensing weak signals at the nanoscale. Nitrogen vacancy centers in diamond, thanks to their superb quantum coherence under ambient conditions and the stability of the material in extreme and complicated environments, have been demonstrated as promising quantum probes in multi-parameter sensing. Their spin properties make them particularly sensitive to magnetic fields, but they are insensitive to temperature, electric field, pressure, etc., and even immune to some bio-parameters (e.g., pH and glucose concentration). Recently, hybrid quantum sensing has emerged as a promising avenue for further enhancing the capabilities of diamond sensors. Different techniques can potentially improve the sensitivity, range of detectable parameters, and sensing frequencies of diamond sensors. This review provides an overview of hybrid quantum sensing using diamond. We first give a brief introduction to quantum sensing using diamond, and then review various hybrid sensing schemes that have been developed to enhance the sensing capabilities of diamond sensors. Finally, the potential applications and challenges associated with hybrid quantum sensing in diamond are discussed.
Quantum sensing is a quantum technology for ultrasensitive detection, which is particularly useful for sensing weak signals at the nanoscale. Nitrogen vacancy centers in diamond, thanks to their superb quantum coherence under ambient conditions and the stability of the material in extreme and complicated environments, have been demonstrated as promising quantum probes in multi-parameter sensing. Their spin properties make them particularly sensitive to magnetic fields, but they are insensitive to temperature, electric field, pressure, etc., and even immune to some bio-parameters (e.g., pH and glucose concentration). Recently, hybrid quantum sensing has emerged as a promising avenue for further enhancing the capabilities of diamond sensors. Different techniques can potentially improve the sensitivity, range of detectable parameters, and sensing frequencies of diamond sensors. This review provides an overview of hybrid quantum sensing using diamond. We first give a brief introduction to quantum sensing using diamond, and then review various hybrid sensing schemes that have been developed to enhance the sensing capabilities of diamond sensors. Finally, the potential applications and challenges associated with hybrid quantum sensing in diamond are discussed.
Magnetic nanoparticles have wide applications in various fields, e.g., magnetic recording in information science, magnetic resonance imaging, and magnetic therapy in bio-medicine. In this chapter, we will review recent applications of magnetic nanoparticles or magnetic complexes in the cutting-edge field of quantum sensing, especially in hybrid quantum sensing. Quantum sensing is a quantum technology for ultrasensitive detection, which is particularly useful for sensing weak signals at the nanoscale. The quantum systems that offer unprecedented sensitivity, resolution, and/or flexibility include superconducting qubits, defect centers in solids, atomic vapors, cold atoms, and so on. Usually, they have spin properties and possess excellent magnetic-field sensitivity; but they are insensitive to temperature, electric field, pressure, etc., and even immune to some bio-parameters (e.g., pH and glucose concentration). Recently, hybrid quantum sensing has offered new possibilities. By converting the insensitive or immune parameters into magnetic signals, the range of detectable parameters of quantum sensing can be broadened significantly. In this chapter, we first give a brief introduction to diamond quantum sensing, then review the applications of magnetic nanoparticles or magnetic complexes in diamond quantum sensing and nano-magnetism, and finally, discuss the potential applications and challenges for hybrid diamond quantum sensing.
Extreme conditions, such as ultra-low temperatures, high pressures, and strong magnetic fields, are critical to producing and studying exotic states of matter. To measure physical properties under extreme conditions, the advanced sensing schemes are required. As a promising quantum sensor, the diamond nitrogen-vacancy (NV) center can detect magnetic field, electronic field, pressure, and temperature with high sensitivity. Considering its nanoscale spatial resolution and ultra-wide working range, the diamond quantum sensing can play an important role in frontier studies involving extreme conditions. This paper reviews the spin and optical properties of diamond NV center under extreme conditions, including low temperature, high temperature, zero field, strong magnetic fields, and high pressures. The opportunities and challenges of diamond quantum sensing under extreme conditions are discussed. The basic knowledge of spin-based quantum sensing and its applications under extreme conditions are also covered.
Point defects in diamond, particularly nitrogen-vacancy (NV) centers, have emerged as powerful tools for a broad range of quantum technologies. These defects are promising candidates for quantum information science, serving as deterministic single-photon sources and solid-state quantum memories. They have also been employed as nanoscale quantum sensors to detect various physical quantities, including magnetic fields, electric fields, and temperature, owing to their long spin coherence time at room temperature. Development of these diamond-based quantum technologies has been rapidly boosted by a recent quantum leap in nanofabrication technologies for high-quality single-crystal diamond. Incorporating these color centers into diamond nanostructures with mature integrated photonics provides a promising route to build scalable and practical systems for quantum applications. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms. Nitrogen-vacancy centers in diamond have emerged as powerful tools for a broad range of quantum technologies. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms.
Quantum sensors encompass a diverse class of devices that exploit quantum coherence to detect weak or nanoscale signals. As their behavior is tied to physical constants, quantum sensors can achieve accuracy, repeatability, and precision approaching fundamental limits [1, 2]. As a result, these sensors have shown utility in a wide range of applications in both science and engineering leading to innovations. Among many solid-state spin systems, nitrogen-vacancy (NV) centers in diamonds have attracted considerable attention as a leading platform in many fields of quantum technologies, from quantum sensing to information processing and communication applications. They have superior physical properties, and their quantum coherence is preserved even at room temperature. The energy levels of NV centers are sensitive to magnetic fields, electric fields, strain, and temperature, and the spatial resolution is scalable from nanometers to millimeters. Therefore, diamond quantum sensors are distinctive sensors with multimodality and span scalable application fields. To realize an ideal quantum sensor for applications, the technical challenges in the sensor materials and the quantum control techniques, such as coherent microwave spin manipulation, effective optical spin-state initialization, and readout, have been developed. This chapter briefly explains the sensing principle using NV centers and then introduces sensor systems for biomedical applications, and monitoring of batteries for electric vehicles and internal power devices.
Quantum sensing aims to detect signals with unparalleled sensitivity, potentially surpassing classical limitations. Solid-state spin defects, particularly nitrogen-vacancy centers in diamond, have emerged as promising platforms due to their long coherence time, optical addressability, high field sensitivity, and spatial and spectral resolution, making them ideal for sensing and imaging applications. Their compact size and robust performance under room temperature and ambient conditions further enhance their suitability for real-world applications. We provide an overview of quantum sensing principles and explore efforts to improve sensor functionality, including advanced sensing protocols, spatial imaging techniques, and integration with optical systems to enhance detection efficiency. We also highlight recent progress in the applications of these sensors across various use cases, including biomedical diagnostics, semiconductor device inspection, and industrial and military applications.
Single qubit in solid-state materials recently emerges as a versatile platform for quantum information. Among them, the nitrogen vacancy (NV) centre in diamond has become a powerful tool in quantum sensing for detecting various physics parameters, including electric and magnetic fields, temperature, force, strain, with ultimate precision and resolutions. It has been widely used in different conditions, from samples in ambient to samples in ultra-high pressure and low temperature. It can detect quantum phase transitions as well as neuron activities. Here we give a general review on both the physics of the sensing mechanism and protocols and applications.