Physical random numbers (PRNs) own various advantageous characteristics, including unpredictability, non-repeatability, higher security and reliability. Meanwhile, laser chaos has attracted great attention in the field of PRN. In terms of single channel PRN, laser chaos schemes can achieve a much higher bit-rate than traditional quantum PRN schemes. So far, various laser chaos PRN schemes have been discussed in order to enhance the performance of single channel laser chaos PRN. However, considering the limited bandwidth of laser chaos, especially the bandwidth of digital electronic circuit, the development potential of single channel PRN should be limited and may fall into the trap of high performance and expensive cost. Recently, the applications of multi-channel parallel PRN schemes have been developed. These parallel types may balance the high performance of PRN in a low cost. Recent progress indicates that chaotic micro-comb may have good potential. The micro-comb exhibits highly nonlinear and complex dynamic characteristics, and each comb tooth may show chaotic oscillation. The wavelength division multiplexing technology enables large-scale optical parallel output, providing the possiblity for large-scale parallel PRN generation. However, most of these PRN schemes are offline rather than true online and real-time random numbers. Thus, the development of real, online real-time parallel PRN solutions has great interest and research value in related fields. Herein we experimentally demonstrat an ultra-high-speed parallel real-time physical random number generator, which is achieved though the combination of chaotic micro-comb of chip-scale Si3N4 ultra-high Q micro-resonator and a high-speed field programmable gate array (FPGA). The results show that the Si3N4 ultra-high Q micro-resonator generates a micro-comb with hundreds of channels, each channel can route into an optically chaotic state, and become an excellent physical entropy source. Using FPGA onboard multi-bit analog-to-digital converter, the filtered optical chaos signal from the micro-comb is discretely sampled and quantized, and resulting in an 8-bit binary bitstream. Taking real-time self-delayed exclusive or (XOR) processing of bitstream and preserving 4 least significant bits, the qualified physical random bitstream with real-time 5 Gbits/s rate is realized experimentally. Considering that there are 294 chaotic comb teeths, our approach anticipates a throughput of 1.74 Tbits/s of real-time physical random bits. Our results could offer a new integrated and ultra-high-speed option for real-time physical random number sources.
Physical random numbers (PRNs) own various advantageous characteristics, including unpredictability, non-repeatability, higher security and reliability. Meanwhile, laser chaos has attracted great attention in the field of PRN. In terms of single channel PRN, laser chaos schemes can achieve a much higher bit-rate than traditional quantum PRN schemes. So far, various laser chaos PRN schemes have been discussed in order to enhance the performance of single channel laser chaos PRN. However, considering the limited bandwidth of laser chaos, especially the bandwidth of digital electronic circuit, the development potential of single channel PRN should be limited and may fall into the trap of high performance and expensive cost. Recently, the applications of multi-channel parallel PRN schemes have been developed. These parallel types may balance the high performance of PRN in a low cost. Recent progress indicates that chaotic micro-comb may have good potential. The micro-comb exhibits highly nonlinear and complex dynamic characteristics, and each comb tooth may show chaotic oscillation. The wavelength division multiplexing technology enables large-scale optical parallel output, providing the possiblity for large-scale parallel PRN generation. However, most of these PRN schemes are offline rather than true online and real-time random numbers. Thus, the development of real, online real-time parallel PRN solutions has great interest and research value in related fields. Herein we experimentally demonstrat an ultra-high-speed parallel real-time physical random number generator, which is achieved though the combination of chaotic micro-comb of chip-scale Si3N4 ultra-high Q micro-resonator and a high-speed field programmable gate array (FPGA). The results show that the Si3N4 ultra-high Q micro-resonator generates a micro-comb with hundreds of channels, each channel can route into an optically chaotic state, and become an excellent physical entropy source. Using FPGA onboard multi-bit analog-to-digital converter, the filtered optical chaos signal from the micro-comb is discretely sampled and quantized, and resulting in an 8-bit binary bitstream. Taking real-time self-delayed exclusive or (XOR) processing of bitstream and preserving 4 least significant bits, the qualified physical random bitstream with real-time 5 Gbits/s rate is realized experimentally. Considering that there are 294 chaotic comb teeths, our approach anticipates a throughput of 1.74 Tbits/s of real-time physical random bits. Our results could offer a new integrated and ultra-high-speed option for real-time physical random number sources.
Ultrafast physical random bit (PRB) generators and integrated schemes have proven to be valuable in a broad range of scientific and technological applications. In this study, we experimentally demonstrated a PRB scheme with a chaotic microcomb using a chip-scale integrated resonator. A microcomb contained hundreds of chaotic channels, and each comb tooth functioned as an entropy source for the PRB. First, a 12 Gbits/s PRB signal was obtained for each tooth channel with proper post-processing and passed the NIST Special Publication 800-22 statistical tests. The chaotic microcomb covered a wavelength range from 1430 to 1675 nm with a free spectral range (FSR) of 100 GHz. Consequently, the combined random bit sequence could achieve an ultra-high rate of about 4 Tbits/s (12 Gbits/s × 294 = 3.528 Tbits/s), with 294 teeth in the experimental microcomb. Additionally, denser microcombs were experimentally realized using an integrated resonator with 33.6 GHz FSR. A total of 805 chaotic comb teeth were observed and covered the wavelength range from 1430 to 1670 nm. In each tooth channel, 12 Gbits/s random sequences was generated, which passed the NIST test. Consequently, the total rate of the PRB was approximately 10 Tbits/s (12 Gbits/s × 805 = 9.66 Tbits/s). These results could offer potential chip solutions of Pbits/s PRB with the features of low cost and a high degree of parallelism.
Random numbers have great application value in the fields of secure communications, which are commonly used as secret keys to encrypt the information. To guarantee that the information is absolutely secure in the current high-speed communication, the applied random keys should possess a generation speed not less than the encrypted data rate, according to one-time pad theory found by Shannon (Shannon C E 1949 Bell.Syst.Tech.J. 28 656) Pseudo-random numbers generated by algorithm may easily reach a fast speed, but a certain periodicity makes them difficult to meet the aforementioned demand of information security. Utilizing physical stochastic phenomena can provide reliable random numbers, called physical random number generators (RNGs). However, limited by the bandwidth of the conventional physical sources such as electronic noise, frequency jitter of oscillator and quantum randomness, the traditional physical RNG has a generation speed at a level of Mb/s typically. Therefore, real-time and ultrafast physical random number generation is urgently required from the view of absolute security for high-speed communication today. With the advent of wideband photonic entropy sources, in recent years lots of schemes for high-speed random number generation are proposed. Among them, chaotic laser has received great attention due to its ultra-wide bandwidth and large random fluctuation of intensity. The real-time speed of physical RNG based on chaotic laser is now limited under 5 Gb/s, although the reported RNG claims that an ultrafast speed of Tb/s is possible in theory. The main issues that restrict the real-time speed of RNG based on chaotic laser are from two aspects. The first aspect is electrical jitter bottleneck confronted by the electrical analog-to-digital converter (ADC). Specifically, most of the methods of extracting random numbers are first to convert the chaotic laser into an electrical signal by a photo-detector, then use an electrical ADC driven by radio frequency (RF) clock to sample and quantify the chaotic signal in electronic domain. Unfortunately, the response rate of ADC is below Gb/s restricted by the aperture jitter (several picoseconds) of RF clock in the sample and hold circuit. The second aspect comes from the complex post-processes, which are fundamental in current RNG techniques to realize a good randomness. The strict synchronization among post-processing components (e.g., XOR gates, memory buffers, high-order difference) is controlled by an RF clock. Similarly, it is also an insurmountable obstacle to achieve an accurate synchronization due to the electronic jitter of the RF clock. In this paper, we propose a method of ultrafast multi-bit physical RNG based on chaotic laser without any post-process. In this method, a train of optical pulses generated by a GHz mode-locked laser with low temporal jitter at a level of fs is used as an optical sampling clock. The chaotic laser is sampled in the optical domain through a low switching energy and high-linearity terahertz optical asymmetric demultiplexer (TOAD) sampler, which is a fiber loop with an asymmetrical nonlinear semiconductor optical amplifier. Then, the peak amplitude of each sampled chaotic pulse is digitized by a multi-bit comparator (i.e., a multi-bit ADC without sample and hold circuit) and converted into random numbers directly. Specifically, a proof-of-principle experiment is executed to demonstrate the aforementioned proposed method. In this experiment, an optical feedback chaotic laser is used, which has a bandwidth of 6 GHz. Through setting a sampling rate to be 5 GSa/s and selecting 4 LSBs outputs of the 8-bit comparator, 20 Gb/s (=5 GSa/s4 LSBs) physical random number sequences are obtained. Considering the ultrafast response rate of TOAD sampler, the speed of random numbers generated by this method has the potential to reach several hundreds of Gb/s as long as the used chaotic laser has a sufficient bandwidth.
Absolutely secure communication should be implemented only through the ‘one-time pad' proposed by Shannon, requires that physical random numbers with rates matched with the associated communication systems be used as secret keys. With the wide application of the WDM technology in optical communication, the single channel rate of the current digital communication system has exceeded 10 Gb/s and developed towards 100 Gb/s. To ensure the absolute security of such a large capacity communication, a large number of real-time, and secure random numbers are needed.#br#Secure random numbers are commonly produced through utilizing physical random phenomena, called physical random number generators. However, conventional physical random number generators are limited by the low bandwidth of the applied entropy sources such as thermal noise, photon-counting and chaotic electrical circuits, and thus have typical low bit rates of the order of Mb/s.#br#In recent years, chaotic lasers attracted wide attention due to their generation of secure, reliable and high-speed random number sequences, and so due to their coherent merits such as high bandwidth, large amplitude fluctuation and ease of integration. There have been lots of schemes based on laser chaos for high-speed random number generation, but most of them execute the random number extractions from the associated laser chaos in the electrical domain and thus their generation rates are faced with the well-known ‘electrical bottleneck'. On the other hand, all-optical random number generation (AO-RNG) methods are all signal processes in the optical domain, so they can efficiently overcome this rate limitation and have a great potential in generating ultrafast random numbers of several dozens or hundreds of Gb/s. However, there is no experimental report on its realization of AO-RNG. One of the obstacles in the way for the AO-RNG achievement is to implement the fast and real-time all-optical sampling of the entropy signals (i.e., laser chaos).#br#In this paper, we present a principal experimental demonstration of the feasibility in the all-optical sampling of the chaotic light signal through constructing a TOAD-based all-optical sampler with a polarization-independent semiconductor optical amplifier (SOA). Specifically, we experimentally generate chaotic laser signals using an optical feedback semiconductor laser and finally complete a 5 GSa/s real-time and high-fidelity all-optical sampling of the chaotic laser with a bandwidth of 6.4 GHz. Further experimental results show that whether the optical sampling period is proportional to the external cavity feedback time or not has a great effect on the weak periodic suppression of the chaotic signal: only when both of them are out of proportion, can the weak periodicity of the original chaotic signal be effectively eliminated; and this is favorable for the generation of high-quality physical random numbers. To the best of our knowledge, it is the first time to realize all-optical sampling of chaotic signal in experiments.
Physical random number generators based on chaotic microcombs, with their complex nonlinear dynamics and multi-channel parallel capability, have attracted considerable research attention. However, key technical challenges for chaotic microcombs are the high correlation between symmetric teeth and the low bandwidth of single-channel teeth, which seriously affect the speed and scalability of random number generation. We experimentally demonstrate a petabit-per-second (Pbit/s) parallel random number generation system based on intensity chaotic modulation and Rayleigh scattering. Through intensity modulation, the effective bandwidth of the single-channel entropy source is increased from 440MHz to 27.6GHz. Crucially, Rayleigh scattering further contributes through the random superposition of backscattered light, which introduces unpredictable fluctuations in intensity, phase, and polarization. This randomness suppresses inter-channel correlation among parallel entropy sources to ~0.02, ensuring their orthogonality. Moreover, by employing polarization-diverse coherent detection on a single-channel, four new low correlated sub-channels are extracted: X-/Y- intensity and phase. We achieve a single-channel bit rate of 14.336 Tbit/s and a total bit rate of 1.032 Pbit/s (over 72 parallel channels) with offline post-processing, representing the highest post-processing record reported in both the single-channel and the total system. Moreover, our scheme based on a single chaotic microcomb and fiber scattering link show fundamentally scalable. The total bit rate can be significantly pushed beyond the Pbit/s level by further expanding the usable comb channel and/or by deploying multiple fiber scattering links in parallel, paving a practical path toward higher throughput regimes.
The exponential growth of data transmission and processing speeds in modern digital infrastructure requires entropy sources capable of producing large volumes of true randomness for information security. Chaotic emissions from semiconductor lasers are attractive in this context because of their fast dynamics and nonrepetitive behavior. Their spectral bandwidth, however, is typically limited to several tens of gigahertz, which constrains the achievable entropy rate and makes ultrafast random bit generation difficult without substantial post-processing. Here, we demonstrate a chaos-based entropy source that employs optical heterodyning between the chaotic emission from a semiconductor laser and an optical frequency comb, yielding a bandwidth exceeding 100 GHz and an experimentally verified single-channel entropy rate of 1.86 Tb/s. By directly extracting multiple bits from the digitized output of the entropy source, we achieve a single-channel random bit generation rate of 1.536 Tb/s, while four-channel parallelization reaches 6.144 Tb/s with no observable interchannel correlation. This linear scalability suggests that aggregate throughput could reach hundreds of terabits per second with additional parallel channels. The broadband, low-overhead photonic architecture presented here provides a viable route to real-time, ultrafast random bit generation with broad implications for secure communications, high-performance AI computing, and large-scale data analytics.
Random bit generators are critical for information security, cryptography, stochastic modeling, and simulations. Speed and scalability are key challenges faced by current physical random bit generation. Herein, we propose a massively parallel scheme for ultrafast random bit generation towards rates of order 100 terabit per second based on a single micro-ring resonator. A modulation-instability-driven chaotic comb in a micro-ring resonator enables the simultaneous generation of hundreds of independent and unbiased random bit streams. A proof-of-concept experiment demonstrates that using our method, random bit streams beyond 2 terabit per second can be successfully generated with only 7 comb lines. This bit rate can be easily enhanced by further increasing the number of comb lines used. Our approach provides a chip-scale solution to random bit generation for secure communication and high-performance computation, and offers superhigh speed and large scalability.