Physical random number generators based on chaotic microcombs, with their complex nonlinear dynamics and multi-channel parallel capability, have attracted considerable research attention. However, key technical challenges for chaotic microcombs are the high correlation between symmetric teeth and the low bandwidth of single-channel teeth, which seriously affect the speed and scalability of random number generation. We experimentally demonstrate a petabit-per-second (Pbit/s) parallel random number generation system based on intensity chaotic modulation and Rayleigh scattering. Through intensity modulation, the effective bandwidth of the single-channel entropy source is increased from 440MHz to 27.6GHz. Crucially, Rayleigh scattering further contributes through the random superposition of backscattered light, which introduces unpredictable fluctuations in intensity, phase, and polarization. This randomness suppresses inter-channel correlation among parallel entropy sources to ~0.02, ensuring their orthogonality. Moreover, by employing polarization-diverse coherent detection on a single-channel, four new low correlated sub-channels are extracted: X-/Y- intensity and phase. We achieve a single-channel bit rate of 14.336 Tbit/s and a total bit rate of 1.032 Pbit/s (over 72 parallel channels) with offline post-processing, representing the highest post-processing record reported in both the single-channel and the total system. Moreover, our scheme based on a single chaotic microcomb and fiber scattering link show fundamentally scalable. The total bit rate can be significantly pushed beyond the Pbit/s level by further expanding the usable comb channel and/or by deploying multiple fiber scattering links in parallel, paving a practical path toward higher throughput regimes.
Physical random number generators based on chaotic microcombs, with their complex nonlinear dynamics and multi-channel parallel capability, have attracted considerable research attention. However, key technical challenges for chaotic microcombs are the high correlation between symmetric teeth and the low bandwidth of single-channel teeth, which seriously affect the speed and scalability of random number generation. We experimentally demonstrate a petabit-per-second (Pbit/s) parallel random number generation system based on intensity chaotic modulation and Rayleigh scattering. Through intensity modulation, the effective bandwidth of the single-channel entropy source is increased from 440MHz to 27.6GHz. Crucially, Rayleigh scattering further contributes through the random superposition of backscattered light, which introduces unpredictable fluctuations in intensity, phase, and polarization. This randomness suppresses inter-channel correlation among parallel entropy sources to ~0.02, ensuring their orthogonality. Moreover, by employing polarization-diverse coherent detection on a single-channel, four new low correlated sub-channels are extracted: X-/Y- intensity and phase. We achieve a single-channel bit rate of 14.336 Tbit/s and a total bit rate of 1.032 Pbit/s (over 72 parallel channels) with offline post-processing, representing the highest post-processing record reported in both the single-channel and the total system. Moreover, our scheme based on a single chaotic microcomb and fiber scattering link show fundamentally scalable. The total bit rate can be significantly pushed beyond the Pbit/s level by further expanding the usable comb channel and/or by deploying multiple fiber scattering links in parallel, paving a practical path toward higher throughput regimes.
Ultrafast physical random bit (PRB) generators and integrated schemes have proven to be valuable in a broad range of scientific and technological applications. In this study, we experimentally demonstrated a PRB scheme with a chaotic microcomb using a chip-scale integrated resonator. A microcomb contained hundreds of chaotic channels, and each comb tooth functioned as an entropy source for the PRB. First, a 12 Gbits/s PRB signal was obtained for each tooth channel with proper post-processing and passed the NIST Special Publication 800-22 statistical tests. The chaotic microcomb covered a wavelength range from 1430 to 1675 nm with a free spectral range (FSR) of 100 GHz. Consequently, the combined random bit sequence could achieve an ultra-high rate of about 4 Tbits/s (12 Gbits/s × 294 = 3.528 Tbits/s), with 294 teeth in the experimental microcomb. Additionally, denser microcombs were experimentally realized using an integrated resonator with 33.6 GHz FSR. A total of 805 chaotic comb teeth were observed and covered the wavelength range from 1430 to 1670 nm. In each tooth channel, 12 Gbits/s random sequences was generated, which passed the NIST test. Consequently, the total rate of the PRB was approximately 10 Tbits/s (12 Gbits/s × 805 = 9.66 Tbits/s). These results could offer potential chip solutions of Pbits/s PRB with the features of low cost and a high degree of parallelism.
The exponential growth of data transmission and processing speeds in modern digital infrastructure requires entropy sources capable of producing large volumes of true randomness for information security. Chaotic emissions from semiconductor lasers are attractive in this context because of their fast dynamics and nonrepetitive behavior. Their spectral bandwidth, however, is typically limited to several tens of gigahertz, which constrains the achievable entropy rate and makes ultrafast random bit generation difficult without substantial post-processing. Here, we demonstrate a chaos-based entropy source that employs optical heterodyning between the chaotic emission from a semiconductor laser and an optical frequency comb, yielding a bandwidth exceeding 100 GHz and an experimentally verified single-channel entropy rate of 1.86 Tb/s. By directly extracting multiple bits from the digitized output of the entropy source, we achieve a single-channel random bit generation rate of 1.536 Tb/s, while four-channel parallelization reaches 6.144 Tb/s with no observable interchannel correlation. This linear scalability suggests that aggregate throughput could reach hundreds of terabits per second with additional parallel channels. The broadband, low-overhead photonic architecture presented here provides a viable route to real-time, ultrafast random bit generation with broad implications for secure communications, high-performance AI computing, and large-scale data analytics.
Physical random numbers (PRNs) own various advantageous characteristics, including unpredictability, non-repeatability, higher security and reliability. Meanwhile, laser chaos has attracted great attention in the field of PRN. In terms of single channel PRN, laser chaos schemes can achieve a much higher bit-rate than traditional quantum PRN schemes. So far, various laser chaos PRN schemes have been discussed in order to enhance the performance of single channel laser chaos PRN. However, considering the limited bandwidth of laser chaos, especially the bandwidth of digital electronic circuit, the development potential of single channel PRN should be limited and may fall into the trap of high performance and expensive cost. Recently, the applications of multi-channel parallel PRN schemes have been developed. These parallel types may balance the high performance of PRN in a low cost. Recent progress indicates that chaotic micro-comb may have good potential. The micro-comb exhibits highly nonlinear and complex dynamic characteristics, and each comb tooth may show chaotic oscillation. The wavelength division multiplexing technology enables large-scale optical parallel output, providing the possiblity for large-scale parallel PRN generation. However, most of these PRN schemes are offline rather than true online and real-time random numbers. Thus, the development of real, online real-time parallel PRN solutions has great interest and research value in related fields. Herein we experimentally demonstrat an ultra-high-speed parallel real-time physical random number generator, which is achieved though the combination of chaotic micro-comb of chip-scale Si3N4 ultra-high Q micro-resonator and a high-speed field programmable gate array (FPGA). The results show that the Si3N4 ultra-high Q micro-resonator generates a micro-comb with hundreds of channels, each channel can route into an optically chaotic state, and become an excellent physical entropy source. Using FPGA onboard multi-bit analog-to-digital converter, the filtered optical chaos signal from the micro-comb is discretely sampled and quantized, and resulting in an 8-bit binary bitstream. Taking real-time self-delayed exclusive or (XOR) processing of bitstream and preserving 4 least significant bits, the qualified physical random bitstream with real-time 5 Gbits/s rate is realized experimentally. Considering that there are 294 chaotic comb teeths, our approach anticipates a throughput of 1.74 Tbits/s of real-time physical random bits. Our results could offer a new integrated and ultra-high-speed option for real-time physical random number sources.
Random bit generators are critical for information security, cryptography, stochastic modeling, and simulations. Speed and scalability are key challenges faced by current physical random bit generation. Herein, we propose a massively parallel scheme for ultrafast random bit generation towards rates of order 100 terabit per second based on a single micro-ring resonator. A modulation-instability-driven chaotic comb in a micro-ring resonator enables the simultaneous generation of hundreds of independent and unbiased random bit streams. A proof-of-concept experiment demonstrates that using our method, random bit streams beyond 2 terabit per second can be successfully generated with only 7 comb lines. This bit rate can be easily enhanced by further increasing the number of comb lines used. Our approach provides a chip-scale solution to random bit generation for secure communication and high-performance computation, and offers superhigh speed and large scalability.
Correlated random bit generation (CRBG) plays an important role in secure communication, particularly for secure key distribution. In this work, we propose and numerically demonstrate a scheme of CRBG based on multi-channel broadband entropy sources and parallel filtering. In this scheme, a chaotic optical frequency comb generator is employed to produce a chaotic frequency comb with multi-channel low-correlated wideband chaos. Based on the commonly driven induced synchronization between two closed-loop distributed feedback lasers and chaotic frequency comb generation, synchronized multi-channel wideband chaos is achieved. Then, parallel filtering is implemented by utilizing an arrayed-waveguide grating to divide the chaotic frequency comb into multi-channel sub-carrier chaos with different wavelengths. To reduce the correlation among adjacent channels and improve the chaos complexity, beating frequency processing with different delay times among adjacent chaotic sub-carriers is performed to get several different sets of chaotic output, among which an enhanced bandwidth over 20 GHz and low correlations are obtained. Moreover, the correlation between the chaotic output and the driving signal can be further suppressed, indicating that the security of the scheme is guaranteed. Multi-channel high-speed CRBG with a total generation rate of 16 Gb/s is successfully achieved at two legitimate users after transmission, with the randomness of multi-channel correlated bit generation verified using a test suite from the National Institute of Standards and Technology. The proposed scheme may provide a way for high-speed multi-channel parallel correlated random bits based on commercial components, which could potentially find applications in future secure optical communication systems.
Correlations existing between spectral components in multi-wavelength lasers have been the key challenge that hinders these laser sources from being developed to chaotic comb entropy sources for parallel random bit generation. Herein, spectrotemporally uncorrelated multi-order Stokes/anti-Stokes emissions are achieved by cooperatively exploiting nonlinear optical processes including cascaded stimulated Brillouin scattering and quasi-phase-matched four-wave mixing in a Brillouin random fiber laser. Chaotic instabilities induced by random mode resonance are enhanced and disorderly redistributed among different lasing lines through complex nonlinear optical interactions, which comprehensively releases the inherent correlation among multiple Stokes/anti-Stokes emission lines, realizing a chaotic frequency comb with multiple spectrotemporally uncorrelated channels. Parallel fast random bit generation is fulfilled with 31 channels, single-channel bit rate of 35-Gbps and total bit rate of 1.085-Tbps. National Institute of Standards and Technology statistic tests verify the randomness of generated bit streams. This work, in a simple and efficient way, breaks the correlation barrier for utilizing multi-wavelength laser to achieve high-quality spectrotemporally uncorrelated chaotic laser source, opening new avenues for achieving greatly accelerated random bit generation through parallelization and potentially revolutionizing the current architecture of secure communication and high-performance computation.