Graph states are entangled states that are useful for several quantum information processing tasks, such as measurement-based quantum computation and quantum metrology. As the size of graph states realized in experiments increases, it becomes more essential to devise efficient methods for estimating the fidelity between the ideal graph state and an experimentally realized actual state. Any efficient fidelity-estimation method, in general, must use multiple experimental settings, i.e., needs to switch between at least two measurements. Recently, it has been shown that a single measurement is sufficient if the noise can be modeled as the phase-flip error. Since the bit-flip error should also occur in several experiments, it is desired to extend this simplest method to noise models that include phase and bit-flip errors. However, it seems to be nontrivial because their result strongly depends on properties of the phase-flip error. In this paper, by analyzing effects of the bit-flip error on stabilizer operators of graph states, we achieve the extension to the depolarizing noise, which is a major noise model including phase and bit-flip errors. We also numerically evaluate our simplest method for noise models interpolating between the phase-flip and depolarizing noises.
Graph states are entangled states that are useful for several quantum information processing tasks, such as measurement-based quantum computation and quantum metrology. As the size of graph states realized in experiments increases, it becomes more essential to devise efficient methods for estimating the fidelity between the ideal graph state and an experimentally realized actual state. Any efficient fidelity-estimation method, in general, must use multiple experimental settings, i.e., needs to switch between at least two measurements. Recently, it has been shown that a single measurement is sufficient if the noise can be modeled as the phase-flip error. Since the bit-flip error should also occur in several experiments, it is desired to extend this simplest method to noise models that include phase and bit-flip errors. However, it seems to be nontrivial because their result strongly depends on properties of the phase-flip error. In this paper, by analyzing effects of the bit-flip error on stabilizer operators of graph states, we achieve the extension to the depolarizing noise, which is a major noise model including phase and bit-flip errors. We also numerically evaluate our simplest method for noise models interpolating between the phase-flip and depolarizing noises.
Graph states are entangled states useful for several quantum information processing tasks such as measurement-based quantum computation and quantum metrology. As the size of graph states realized in experiments increases, it becomes more essential to devise efficient methods estimating the fidelity between the ideal graph state and an experimentally-realized actual state. Any efficient fidelity-estimation method, in general, must use multiple experimental settings, i.e., needs to switch between at least two measurements. Recently, it has been shown that a single measurement is sufficient if the noise can be modeled as the phase-flip error. Since the bit-flip error should also occur in several experiments, it is desired to extend this simplest method to noise models that include phase and bit-flip errors. However, it seems to be nontrivial because their result strongly depends on properties of the phase-flip error. In this paper, by analyzing effects of the bit-flip error on stabilizer operators of graph states, we achieve the extension to the depolarizing noise, which is a major noise model including phase and bit-flip errors. We also numerically evaluate our simplest method for noise models interpolating between the phase-flip and depolarizing noises.
Graph states are entangled states that are essential for quantum information processing. As experimental advances enable the realization of large-scale graph states, efficient fidelity estimation methods are crucial for assessing their robustness against noise. However, calculations of exact fidelity become intractable for large systems due to the exponential growth in the number of stabilizers. In this work, we show that the fidelity between any ideal graph state and its noisy counterpart under IID Pauli noise can be mapped to the partition function of a classical spin system, enabling efficient computation via statistical mechanical techniques. Using this approach, we analyze the fidelity for regular graph states under depolarizing noise and uncover the emergence of phase transitions in fidelity between the pure-state regime and the noise-dominated regime. Specifically, in 2D, phase transitions occur only when the degree satisfies d ≥ 6 , while in 3D they already appear at d ≥ 5 . However, for graph states with excessively high degree, such as fully connected graphs, the phase transition disappears. Robustness of graph states against noise is thus determined by their connectivity and spatial dimensionality. Graph states with lower degree and/or dimensionality, which exhibit a smooth crossover, demonstrate greater robustness, while highly connected or higher-dimensional graph states are more fragile. Extreme connectivity, as the fully connected graph state possesses, restores robustness. Furthermore, we show that the fidelity can be rewritten in the form of the partition function of a constraint-percolation problem. Within this picture, we discuss the qualitative difference between 2D regular graph states with d = 6 and d = 5 regarding the presence or absence of a phase transition, as well as the suppressed critical behavior of fully connected graph states.
We present a method to conduct both quantum state reconstruction and entanglement purification simultaneously that is advantageous in several respects over previous work in this direction, showing that the number of Bell pairs necessary to boot a quantum network can be significantly reduced compared to an existing method. The existing method requires at least 105 Bell pairs for the state reconstruction phase to estimate that the state is of fidelity 0.99 within the error range of 10−2, whereas our approach only requires around 2,841 to be certain with 99.7% of confidence that the estimated fidelity lies within [0.99−0.01,0.99+0.01]. In addition, in our approach we can start with a lower fidelity Bell pair and purify it multiple times, estimating at the same time the resultant fidelity with guarantee of 99.7% that the fidelity estimate lies within a certain range. Moreover, the existing method cannot correct both bit-flip and phase-flip errors at the same time and can only correct one of these, whereas our approach can correct both bit-flip and phase-flip errors simultaneously. This research produces numerical estimates for the number of Bell pairs actually needed to guarantee a certain threshold fidelity F. The research can support the functioning real-world quantum networking by providing the information of the time needed for the bootstrapping of a quantum network to finish.
Noise is a major challenge in quantum computing, affecting the reliability of quantum protocols. In this work, we analytically study the impact of various noise processes, such as depolarization, bit flip, and phase flip, on the quantum state teleportation protocol. Each noise process is modeled as a quantum channel and is applied individually to all qubits after the corresponding unitary operations to simulate realistic conditions. We evaluate the fidelity between the ideal and noisy teleported states to quantify the effect of noise. Our analysis shows that the fidelity decreases polynomially, in general, as the noise strength increases for all noise types, highlighting the sensitivity of state teleportation to different noise mechanisms. However, in the low noise regime, the fidelity decreases only linearly, indicating the robustness of the teleportation protocol. These results provide insight into error characterization and can inform strategies for noise mitigation in practical quantum computing applications.
Graph states are entangled resource states for universal measurement-based quantum computation. Although matter qubits such as superconducting circuits and trapped ions are promising candidates to generate graph states, it is technologically hard to entangle a large number of them due to several types of noise. Since they must be sufficiently cooled to maintain their quantum properties, thermal noise is one of the major ones. In this paper, we show that, for any temperature T, the fidelity $\ensuremath{\langle}G|{\ensuremath{\rho}}_{T}|G\ensuremath{\rangle}$ between an ideal graph state $|G\ensuremath{\rangle}$ at zero temperature and a thermal graph state ${\ensuremath{\rho}}_{T}$, which is a graph state at temperature T, can be efficiently estimated by using only one measurement setting. A remarkable property of our protocol is that it is passive, while existing protocols are active, namely, they switch between at least two measurement settings. Since thermal noise is equivalent to an independent phase-flip error, our estimation protocol also works for that error. By generalizing our protocol to hypergraph states, we apply our protocol to the quantum-computational-supremacy demonstration with instantaneous quantum polynomial time circuits. Our results should make the characterization of entangled matter qubits extremely feasible under thermal noise.
The family of quantum graph and hypergraph states are ubiquitous in quantum information. They have diverse applications ranging from quantum network protocols to measurement based quantum computing. The hypergraph states are a generalization of graph states, a well-known family of entangled multi-qubit quantum states. We can map these states to qudit states. In this work, we analyze a number of noisy quantum channels for qudits, on the family of qudit hypergraph states. The channels studied are the dit-flip noise, phase flip noise, dit-phase flip noise, depolarizing noise, non-Markovian Amplitude Damping Channel (ADC), dephasing noise, and depolarization noise. To gauge the effect of noise on quantum hypergraph states, the fidelity between the original and the final states is studied. The change of coherence under the action of noisy channels is also studied, both analytically and numerically.