Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Crosstalk-Robust Quantum Control in Multimode Bosonic Systems

X. You

Published Nov 22, 2023• 1 citation
Publisher

Abstract

Universal control of multimode bosonic modes typically relies on a dispersively coupled transmon ancilla. However, its frequency undergoes a Stark shift that depends on the state of each coupled bosonic mode, leading to a frequency mismatch in the ancilla drive and ultimately reducing the fidelity of multimode gates
DOI
10.2172/2228309

Related papers

Crosstalk-robust quantum control in multimode bosonic systems

Xinyuan You, Yunwei Lu, T. W. Kim +10 more

High-coherence superconducting cavities offer a hardware-efficient platform for quantum information processing. To achieve universal operations of these bosonic modes, the requisite nonlinearity is realized by coupling them to a transmon ancilla. However, this configuration is susceptible to crosstalk errors in the dispersive regime, where the ancilla frequency is Stark shifted by the state of each coupled bosonic mode. This leads to a frequency mismatch of the ancilla drive, lowering the gate fidelities. To mitigate such coherent errors, we employ quantum optimal control to engineer ancilla pulses that are robust to the frequency shifts. These optimized pulses are subsequently integrated into a recently developed echoed conditional displacement protocol for executing single- and two-mode operations. Through numerical simulations, we examine two representative scenarios: the preparation of single-mode Fock states in the presence of spectator modes and the generation of two-mode entangled Bell-cat states. Our approach markedly suppresses crosstalk errors, outperforming conventional ancilla control methods by orders of magnitude. These results provide guidance for experimentally achieving high-fidelity multimode operations and pave the way for developing high-performance bosonic quantum information processors.

arXiv:2403.00275•Physical Review Applied•Oct 25, 2024•25 citations

Fast Sideband Control of a Multimode Cavity Memory with Weak Dispersive Coupling to a Transmon

Jordan Huang, Thomas J. DiNapoli, Gavin Rockwood +9 more

Mitigating ancilla-mediated error channels is a critical challenge in controlling high-quality superconducting cavities using circuit quantum electrodynamics (cQED). We address this by weakening the dispersive coupling while demonstrating fast, high-fidelity multimode control through transmon-mediated sideband interactions. We implement transmon-cavity SWAP gates with speeds up to 30 times larger than the bare dispersive coupling. Combined with transmon rotations, this enables universal state preparation in a single mode, though achieving unitary gates and extending control to multiple modes remains a challenge. In this work, we overcome this limitation by introducing two control strategies: (i) a shelving technique that stores populations in sideband-transparent states, and (ii) a method that exploits the dispersive shift to implement photon-number-selective transmon-cavity SWAP gates. We use these protocols to prepare Fock and binomial code states across any of the ten modes of a multimode cavity with millisecond coherence times—serving as a multimode quantum memory. We demonstrate unitaries that encode and decode an arbitrary qubit state from the transmon into corresponding vacuum and Fock state superpositions, as well as entangled NOON states of cavity mode pairs—a scheme extendable to arbitrary multimode Fock encodings in the cavity modes. Furthermore, we implement a new binomial encoding gate that converts arbitrary transmon superpositions into binomial code states in any cavity mode at a rate exceeding the dispersive shifts in our system, achieving an average post-selected state fidelity of 96.3% in a 4 μ s gate time. By using precalibrated transmon and sideband pulses, our work demonstrates multimode control with significantly reduced calibration overhead, enabling efficient unitary operations using sideband interactions in multimode cQED systems.

arXiv:2503.10623•Physical Review X•Jan 22, 2026•24 citations

Quantum control of bosonic modes with superconducting circuits

Wen-Long Ma, Shruti Puri, Robert J. Schoelkopf +3 more

arXiv:2102.09668•中国科学通报:英文版•May 31, 2021•122 citations

Conditional-not Displacement: Fast Multioscillator Control with a Single Qubit

Asaf A. Diringer, Eliya Blumenthal, Avishay Grinberg +2 more

Bosonic encoding is an approach for quantum information processing, promising lower hardware overhead by encoding in the many levels of a harmonic-oscillator mode. Scaling to multiple modes requires weak interaction for independent control, yet strong interaction for fast control. Applying fast and efficient universal control on multiple modes remains an open problem. Surprisingly, we find that displacements conditioned on the state of a single-qubit ancilla coupled to multiple harmonic oscillators are sufficient for universal control. We present the conditional- operation concept, which can be used to reduce the duration of entangling gates. Within this guiding concept, we develop the conditional- displacement control method which enables fast generation and control of bosonic states in multimode systems weakly coupled to a single-ancilla qubit. Our method is fast despite the weak ancilla coupling. The weak coupling in turn allows for excellent separability and thus independent control. We demonstrate our control on a superconducting transmon qubit weakly coupled to a multimode superconducting cavity. We create both entangled and separable cat states in different modes of the multimode cavity, showing entangling operations at low crosstalk while maintaining independent control of the different modes. We show that the operation time is not limited by the inverse of the coupling rate, which is the typical timescale, and we exceed it by almost 2 orders of magnitude. We verify our results with an efficient method for measurement of the multimode characteristic function which employs our conditional- displacement. Our results inspire a new approach toward general entangling operations and allow for fast and efficient multimode bosonic encoding and measurement. Published by the American Physical Society 2024

arXiv:2301.09831•Physical Review X•Mar 26, 2024•37 citations

Towards strong multi-mode coupling between a transmon and a metamaterial resonator

Sagar Indrajeet, H. Wang, B. L. T. Plourde +4 more

Bulletin of the American Physical Society•Mar 4, 2020•0 citations

A Distributed Microwave Qubit Emulator for Control-Hardware Calibration

Prafull Purohit, Soumyajit Mandal

Development and calibration of room-temperature microwave control electronics for superconducting qubits is gated by the cooldown time and limited availability of dilution-refrigerator-mounted qubits used as test loads. We present Q-EMU, a passive PCB-level distributed microwave circuit that emulates the room-temperature signature of a transmon coupled to a readout resonator. Q-EMU is a distributed version of the standard cQED equivalent circuit that uses an SPDT switch in place of the Josephson element and a shunt hyperabrupt varactor for both continuous frequency tuning and an emulated AC Stark shift via $C(V)$ nonlinearity, so the drive port load-tests the transmit chain while the readout feedline pair load-tests the receive chain. Large-signal simulations on a Rogers RO4350B-class PCB show a principal coupled mode at 6.58 GHz (loaded $Q \approx 108, \kappa / 2 \pi \approx \mathbf{6 1 ~ M H z}$), a state-dependent dispersive shift $\chi_{\text {eff }} / 2 \pi \approx \mathbf{2 8 ~ M H z}$, continuous bias tunability of the qubit-resonator frequency over ~250 MHz at essentially constant linewidth, and a power-dependent shift fitting $f_{q}(P)=f_{0}-A P_{\text{lin}}$ with $A \approx \mathbf{6 3 ~ k H z} / \mathrm{mW}$ (58 MHz total span over 0-30 dBm). The current baseline operates in the borderline-dispersive regime; reducing $C_{g}$ by $\sim \mathbf{5} \times$ in a follow-up revision would bring $\chi / 2 \pi$ into the $\sim \mathbf{1} \mathrm{MHz}$ regime typical of real transmons while reducing the power-dependent shift. The design scales naturally to mm-wave frequencies for emerging K-band superconducting qubits.

IEEE International Midwest Symposium on Circuits and Systems (MWSCAS)•Aug 1, 2026•0 citations
High-coherence superconducting cavities offer a hardware-efficient platform for quantum information processing. To achieve universal operations of these bosonic modes, the requisite nonlinearity is realized by coupling them to a transmon ancilla. However, this configuration is susceptible to crosstalk errors in the dispersive regime, where the ancilla frequency is Stark shifted by the state of each coupled bosonic mode. This leads to a frequency mismatch of the ancilla drive, lowering the gate fidelities. To mitigate such coherent errors, we employ quantum optimal control to engineer ancilla pulses that are robust to the frequency shifts. These optimized pulses are subsequently integrated into a recently developed echoed conditional displacement protocol for executing single- and two-mode operations. Through numerical simulations, we examine two representative scenarios: the preparation of single-mode Fock states in the presence of spectator modes and the generation of two-mode entangled Bell-cat states. Our approach markedly suppresses crosstalk errors, outperforming conventional ancilla control methods by orders of magnitude. These results provide guidance for experimentally achieving high-fidelity multimode operations and pave the way for developing high-performance bosonic quantum information processors.
Mitigating ancilla-mediated error channels is a critical challenge in controlling high-quality superconducting cavities using circuit quantum electrodynamics (cQED). We address this by weakening the dispersive coupling while demonstrating fast, high-fidelity multimode control through transmon-mediated sideband interactions. We implement transmon-cavity SWAP gates with speeds up to 30 times larger than the bare dispersive coupling. Combined with transmon rotations, this enables universal state preparation in a single mode, though achieving unitary gates and extending control to multiple modes remains a challenge. In this work, we overcome this limitation by introducing two control strategies: (i) a shelving technique that stores populations in sideband-transparent states, and (ii) a method that exploits the dispersive shift to implement photon-number-selective transmon-cavity SWAP gates. We use these protocols to prepare Fock and binomial code states across any of the ten modes of a multimode cavity with millisecond coherence times—serving as a multimode quantum memory. We demonstrate unitaries that encode and decode an arbitrary qubit state from the transmon into corresponding vacuum and Fock state superpositions, as well as entangled NOON states of cavity mode pairs—a scheme extendable to arbitrary multimode Fock encodings in the cavity modes. Furthermore, we implement a new binomial encoding gate that converts arbitrary transmon superpositions into binomial code states in any cavity mode at a rate exceeding the dispersive shifts in our system, achieving an average post-selected state fidelity of 96.3% in a 4 μ s gate time. By using precalibrated transmon and sideband pulses, our work demonstrates multimode control with significantly reduced calibration overhead, enabling efficient unitary operations using sideband interactions in multimode cQED systems.
Bosonic encoding is an approach for quantum information processing, promising lower hardware overhead by encoding in the many levels of a harmonic-oscillator mode. Scaling to multiple modes requires weak interaction for independent control, yet strong interaction for fast control. Applying fast and efficient universal control on multiple modes remains an open problem. Surprisingly, we find that displacements conditioned on the state of a single-qubit ancilla coupled to multiple harmonic oscillators are sufficient for universal control. We present the conditional- operation concept, which can be used to reduce the duration of entangling gates. Within this guiding concept, we develop the conditional- displacement control method which enables fast generation and control of bosonic states in multimode systems weakly coupled to a single-ancilla qubit. Our method is fast despite the weak ancilla coupling. The weak coupling in turn allows for excellent separability and thus independent control. We demonstrate our control on a superconducting transmon qubit weakly coupled to a multimode superconducting cavity. We create both entangled and separable cat states in different modes of the multimode cavity, showing entangling operations at low crosstalk while maintaining independent control of the different modes. We show that the operation time is not limited by the inverse of the coupling rate, which is the typical timescale, and we exceed it by almost 2 orders of magnitude. We verify our results with an efficient method for measurement of the multimode characteristic function which employs our conditional- displacement. Our results inspire a new approach toward general entangling operations and allow for fast and efficient multimode bosonic encoding and measurement. Published by the American Physical Society 2024
Development and calibration of room-temperature microwave control electronics for superconducting qubits is gated by the cooldown time and limited availability of dilution-refrigerator-mounted qubits used as test loads. We present Q-EMU, a passive PCB-level distributed microwave circuit that emulates the room-temperature signature of a transmon coupled to a readout resonator. Q-EMU is a distributed version of the standard cQED equivalent circuit that uses an SPDT switch in place of the Josephson element and a shunt hyperabrupt varactor for both continuous frequency tuning and an emulated AC Stark shift via C(V)C(V)C(V) nonlinearity, so the drive port load-tests the transmit chain while the readout feedline pair load-tests the receive chain. Large-signal simulations on a Rogers RO4350B-class PCB show a principal coupled mode at 6.58 GHz (loaded Q≈108,κ/2π≈61 MHzQ \approx 108, \kappa / 2 \pi \approx \mathbf{6 1 ~ M H z}Q≈108,κ/2π≈61 MHz), a state-dependent dispersive shift χeff /2π≈28 MHz\chi_{\text {eff }} / 2 \pi \approx \mathbf{2 8 ~ M H z}χeff ​/2π≈28 MHz, continuous bias tunability of the qubit-resonator frequency over ~250 MHz at essentially constant linewidth, and a power-dependent shift fitting fq(P)=f0−APlinf_{q}(P)=f_{0}-A P_{\text{lin}}fq​(P)=f0​−APlin​ with A≈63 kHz/mWA \approx \mathbf{6 3 ~ k H z} / \mathrm{mW}A≈63 kHz/mW (58 MHz total span over 0-30 dBm). The current baseline operates in the borderline-dispersive regime; reducing CgC_{g}Cg​ by ∼5×\sim \mathbf{5} \times∼5× in a follow-up revision would bring χ/2π\chi / 2 \piχ/2π into the ∼1MHz\sim \mathbf{1} \mathrm{MHz}∼1MHz regime typical of real transmons while reducing the power-dependent shift. The design scales naturally to mm-wave frequencies for emerging K-band superconducting qubits.