Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

Enhanced production of 199Hg cold atoms based on two-dimensional magneto-optical trap

Ze-Xin Yu, Qixin Liu, Jianfang Sun, Zhen Xu

Published Oct 9, 2023• 1 citation
Publisher

Abstract

Efficient preparation of cold atoms plays an important role in realizing precision measurement including optical lattice clocks (OLCs). Fast preparation of cold atoms reduces Dick noise by shortening dead time in a clock interrogation cycle, which improves the stability of OLCs. Here, we increase the loading rate of the three-dimensional magneto-optical trap (3D-MOT) in the ultra-high vacuum environment by utilizing the two-dimensional magneto-optical trap (2D-MOT) with a push beam, reduce the temperature of cold atoms with the compression-MOT technique which is implemented by reducing the detuning of 3D-MOT rapidly at the end of atom preparation, and realize the enhanced production of cold atoms for 199Hg OLCs. To achieve 3D-MOT and 2D-MOT of mercury atoms, a deep ultraviolet laser (DUVL) system composed of three DUVLs is developed with one working in lower power for frequency locking and the other two in high power for laser cooling. Such a configuration improves the long-term frequency stability and shows greater robustness than our previous system consisting of two DUVLs. To maximize the 3D-MOT loading rate, we orderly optimize the detuning and the magnetic field gradient of 3D-MOT and those of 2D-MOT as well as the detuning and the power of the push beam. After all parameters are optimized, we measure the maximum loading rate of 3D-MOT to be 3.1×105 s–1 and prepare cold atoms of 1.8×106 in 9 s. The loading rate is greatly enhanced by a factor of 51 by using 2D-MOT and the push beam. In order to improve the efficiency of transferring cold atoms from 3D-MOT to optical lattice, we use compression-MOT technique to reduce the temperature of cold atoms and produce cold 199Hg atoms which are about 45 μK, lower than the expected temperature of Doppler cooling theory. By achieving the high gain of the 3D-MOT loading rate under the ultra-high vacuum and reducing the temperature of cold atoms, this enhanced preparation of cold atoms based on 2D-MOT effectively shortens the preparation time of cold atoms and improves the transfer efficiency of optical lattice, which provides a significant scheme for efficiently preparing cold mercury atoms in other experiments.

DOI
10.7498/aps.73.20231243

Related papers

Enhanced cold mercury atom production with two-dimensional magneto-optical trap

Ye Zhang, Qixin Liu, Jianfang Sun +2 more

A cold atom source is important for quantum metrology and precision measurement. To reduce the quantum projection noise limit in optical lattice clock, one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate. In this work, we realize an enhanced cold mercury atom source based on a two-dimensional (2D) magneto-optical trap (MOT). The vacuum system is composed of two titanium chambers connected with a differential pumping tube. Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional (3D)-MOT, respectively. Using an optimized 2D-MOT and push beam, about 1.3×106 atoms, which are almost an order of magnitude higher than using a pure 3D-MOT, are loaded into the 3D-MOT for 202Hg atoms. This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.

Chinese Physics B•Feb 10, 2022•7 citations

Optimization of the loading rate of magneto-optical trap for neutral mercury atom

Gou Wei, Kangkang Liu, 付小虎 Fu Xiaohu +3 more

Optics lattice clock is a hot topic in the researches of frequency standard and metrology. Neutral mercury atom is one of the most promising candidates for optical lattice clock. Due to its large atomic number, mercury atom is insensitive to black body radiation, which is the severe limitation for developing the optical lattice clocks. To realize the optical lattice clock of neutral mercury atoms, the first step is to implement laser-cooling and trapping of neutral mercury atoms. The cooling transition of mercury atom is 1S0-3P1 transition. The wavelength is 253.7 nm, the line width is 1.27 MHz, and the saturation intensity is 10.2 mW/cm2. Quantum projection noise (QPN) is an important parameter that affects optical lattice clock. Increasing the loading rate of magneto-optical trap (MOT) can help lower the QPN, thereby improving the performance of optical lattice clock. In this work, we calculate the scattering force of deep UV cooling laser, which is exerted on mercury atom in our single chamber MOT, and numerically simulate the one-dimensional motion of the atom in the MOT. It gives us the capture velocity under optimized parameters of the MOT. Then we calculate the loading rate of three-dimensional MOT by a high efficient random sampling method. According to the rate equation of MOT, the loading rate is proportional to the atom number of the steady state, which is the accessible parameter in the experiment. An experimental setup of MOT is established with a high vacuum system and a frequency quadrupled semiconductor laser system. The fluorescence imaging on an EMCCD gives the atom number in the MOT. We also calibrate the vapor density of background mercury gas in the vacuum, and measure the atom number in a steady MOT. We numerically simulate and experimentally study the influences on the atom number on the parameters of MOT, such as laser intensity, laser detuning and magnetic field gradient. The calculated results are in consistent with the experimental results. We also find the optimized parameters to maximize the loading rate. The numerical simulation also gives some results beyond current experimental condition, especially for laser intensity. From the simulations we obtain the optimized MOT parameter and relation for laser cooling of neutral mercury atom. Especially, current deep UV cooling laser with 20 mW of power does not have enough power to enhance the loading rate. These results are rather valuable for designing the next generation of optical lattice clocks for neutral mercury atoms.

Acta Physica Sinica•Jan 1, 2016•4 citations

Exploiting the two-dimensional magneto-optical trapping of Hg199 for a mercury optical lattice clock

Changlei Guo, Valentin Cambier, James Calvert +4 more

Two-dimensional magneto-optical trapping (2D-MOT) is an efficient tool for generating a high flux of precooled atoms. A 2D-MOT for mercury (Hg) is so far missing despite the potential of this atomic species in several areas. Here, we present the characterization of a 2D-MOT for Hg enabled by addressing the ${}^{1}{S}_{0}$- ${}^{3}{P}_{1}$ laser cooling transition at 254 nm. The laser source based on an ytterbium-doped fiber amplifier has low-frequency noise and high reliability. Parameters affecting the efficiency of the 2D-MOT are studied, i.e., optical trapping power, push beam power, cooling laser frequency detuning, and magnetic-field gradient. When used with a Hg optical lattice clock, the 2D-MOT increases by a factor of 4.5, the rate of preparation of the atomic samples, yielding an improved clock short term stability of $6.4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}16}$ at 1 s.

Physical Review A•Mar 27, 2023•10 citations

Recent Progress of Mercury Lattice Clock in SIOM

Qixin Liu, Ye Zhang, Zexin Yu +2 more

To realize a neutral mercury lattice clock, an experimental setup is in developing in SIOM. With two stable cooling lasers and a new vacuum system, an enhanced cold mercury atom source is implemented based on a two-dimensional magneto-optical trap (2D-MOT). By applying a hybrid frequency stabilization method and optimization of the 2D-MOT, about 1.3×106cold mercury atoms are obtained with a loading rate of 1.0×106atoms/s. And a high power injection-locked Ti:sapphire laser at 725 nm is developed for optical lattice at magic-wavelength.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 24, 2022•0 citations

Optimization of Transfer of Cold Atoms From TwoDimensional Magneto Optical Trap to ThreeDimensional Magneto Optical Trap

Tirumalasetty Panduranga Mahesh, Nobuyuki Takei Supervisors Dr. Kenji Ohmori, Ayan Banerjee

This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.

•Apr 1, 2018•0 citations

3D optical lattices cooling of ultracold Cs atoms

Hongliang Wang, Guosheng Feng, Yuqing Li +4 more

Laser cooling of atoms is the basis of researches on ultracold atoms and molecules. It is of great importance in the study of precision measurement and quantum simulation, etc. In order to obtain ultracold cesium atomic sample with a lower temperature and a higher density, as the starting point to create ultracold cesium ground state molecules, we demonstrate in this article a method which effectively overcomes the heating from the reabsorption of scattered light in magneto-optical trap to further reduce the ultracold atomic temperature by loading atoms into a 3D optical lattices. Based on obtaining the ultracold Cs atoms in a standard magneto-optical trap, we use the compressed magneto-optical trap technology to increase ultracold Cs atomic density. Efficient loading of ultracold Cs atoms is achieved by 3D optical lattices which constructed by four lasers; the temperature of the atoms is measured by time-of-flight method. We observed the cooling result that the temperature drops from ~60.0 μK to ~11.6 μK. We also explore the dependence of the atom numbers in the lattice on the frequency of lattice lasers, and lead to the conclusion that the loading rate of the optical lattices reaches its maximum when the lattices laser’s detuning is –15.5 GHz. In the meantime, this paper investigates the use of optical lattice to suppress the heating of the ultracold atoms due to the radiation photons, in this sense, our research has far-reaching significance. Our scheme is advantageous due to its relaxed starting temperature requirement, meaning that 3D DRSC can be directly accomplished in a standard single cell vapour-loaded MOT without reliance on any additional devices such as a Zeeman slower.

Zhongguo kexue. Wulixue Lixue Tianwenxue•Feb 13, 2017•0 citations
Efficient preparation of cold atoms plays an important role in realizing precision measurement including optical lattice clocks (OLCs). Fast preparation of cold atoms reduces Dick noise by shortening dead time in a clock interrogation cycle, which improves the stability of OLCs. Here, we increase the loading rate of the three-dimensional magneto-optical trap (3D-MOT) in the ultra-high vacuum environment by utilizing the two-dimensional magneto-optical trap (2D-MOT) with a push beam, reduce the temperature of cold atoms with the compression-MOT technique which is implemented by reducing the detuning of 3D-MOT rapidly at the end of atom preparation, and realize the enhanced production of cold atoms for 199Hg OLCs. To achieve 3D-MOT and 2D-MOT of mercury atoms, a deep ultraviolet laser (DUVL) system composed of three DUVLs is developed with one working in lower power for frequency locking and the other two in high power for laser cooling. Such a configuration improves the long-term frequency stability and shows greater robustness than our previous system consisting of two DUVLs. To maximize the 3D-MOT loading rate, we orderly optimize the detuning and the magnetic field gradient of 3D-MOT and those of 2D-MOT as well as the detuning and the power of the push beam. After all parameters are optimized, we measure the maximum loading rate of 3D-MOT to be 3.1×105 s–1 and prepare cold atoms of 1.8×106 in 9 s. The loading rate is greatly enhanced by a factor of 51 by using 2D-MOT and the push beam. In order to improve the efficiency of transferring cold atoms from 3D-MOT to optical lattice, we use compression-MOT technique to reduce the temperature of cold atoms and produce cold 199Hg atoms which are about 45 μK, lower than the expected temperature of Doppler cooling theory. By achieving the high gain of the 3D-MOT loading rate under the ultra-high vacuum and reducing the temperature of cold atoms, this enhanced preparation of cold atoms based on 2D-MOT effectively shortens the preparation time of cold atoms and improves the transfer efficiency of optical lattice, which provides a significant scheme for efficiently preparing cold mercury atoms in other experiments.
A cold atom source is important for quantum metrology and precision measurement. To reduce the quantum projection noise limit in optical lattice clock, one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate. In this work, we realize an enhanced cold mercury atom source based on a two-dimensional (2D) magneto-optical trap (MOT). The vacuum system is composed of two titanium chambers connected with a differential pumping tube. Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional (3D)-MOT, respectively. Using an optimized 2D-MOT and push beam, about 1.3×106 atoms, which are almost an order of magnitude higher than using a pure 3D-MOT, are loaded into the 3D-MOT for 202Hg atoms. This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.
Optics lattice clock is a hot topic in the researches of frequency standard and metrology. Neutral mercury atom is one of the most promising candidates for optical lattice clock. Due to its large atomic number, mercury atom is insensitive to black body radiation, which is the severe limitation for developing the optical lattice clocks. To realize the optical lattice clock of neutral mercury atoms, the first step is to implement laser-cooling and trapping of neutral mercury atoms. The cooling transition of mercury atom is 1S0-3P1 transition. The wavelength is 253.7 nm, the line width is 1.27 MHz, and the saturation intensity is 10.2 mW/cm2. Quantum projection noise (QPN) is an important parameter that affects optical lattice clock. Increasing the loading rate of magneto-optical trap (MOT) can help lower the QPN, thereby improving the performance of optical lattice clock. In this work, we calculate the scattering force of deep UV cooling laser, which is exerted on mercury atom in our single chamber MOT, and numerically simulate the one-dimensional motion of the atom in the MOT. It gives us the capture velocity under optimized parameters of the MOT. Then we calculate the loading rate of three-dimensional MOT by a high efficient random sampling method. According to the rate equation of MOT, the loading rate is proportional to the atom number of the steady state, which is the accessible parameter in the experiment. An experimental setup of MOT is established with a high vacuum system and a frequency quadrupled semiconductor laser system. The fluorescence imaging on an EMCCD gives the atom number in the MOT. We also calibrate the vapor density of background mercury gas in the vacuum, and measure the atom number in a steady MOT. We numerically simulate and experimentally study the influences on the atom number on the parameters of MOT, such as laser intensity, laser detuning and magnetic field gradient. The calculated results are in consistent with the experimental results. We also find the optimized parameters to maximize the loading rate. The numerical simulation also gives some results beyond current experimental condition, especially for laser intensity. From the simulations we obtain the optimized MOT parameter and relation for laser cooling of neutral mercury atom. Especially, current deep UV cooling laser with 20 mW of power does not have enough power to enhance the loading rate. These results are rather valuable for designing the next generation of optical lattice clocks for neutral mercury atoms.
Two-dimensional magneto-optical trapping (2D-MOT) is an efficient tool for generating a high flux of precooled atoms. A 2D-MOT for mercury (Hg) is so far missing despite the potential of this atomic species in several areas. Here, we present the characterization of a 2D-MOT for Hg enabled by addressing the 1S0{}^{1}{S}_{0}1S0​- 3P1{}^{3}{P}_{1}3P1​ laser cooling transition at 254 nm. The laser source based on an ytterbium-doped fiber amplifier has low-frequency noise and high reliability. Parameters affecting the efficiency of the 2D-MOT are studied, i.e., optical trapping power, push beam power, cooling laser frequency detuning, and magnetic-field gradient. When used with a Hg optical lattice clock, the 2D-MOT increases by a factor of 4.5, the rate of preparation of the atomic samples, yielding an improved clock short term stability of $6.4\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}16}$ at 1 s.
To realize a neutral mercury lattice clock, an experimental setup is in developing in SIOM. With two stable cooling lasers and a new vacuum system, an enhanced cold mercury atom source is implemented based on a two-dimensional magneto-optical trap (2D-MOT). By applying a hybrid frequency stabilization method and optimization of the 2D-MOT, about 1.3×106cold mercury atoms are obtained with a loading rate of 1.0×106atoms/s. And a high power injection-locked Ti:sapphire laser at 725 nm is developed for optical lattice at magic-wavelength.
This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.
Laser cooling of atoms is the basis of researches on ultracold atoms and molecules. It is of great importance in the study of precision measurement and quantum simulation, etc. In order to obtain ultracold cesium atomic sample with a lower temperature and a higher density, as the starting point to create ultracold cesium ground state molecules, we demonstrate in this article a method which effectively overcomes the heating from the reabsorption of scattered light in magneto-optical trap to further reduce the ultracold atomic temperature by loading atoms into a 3D optical lattices. Based on obtaining the ultracold Cs atoms in a standard magneto-optical trap, we use the compressed magneto-optical trap technology to increase ultracold Cs atomic density. Efficient loading of ultracold Cs atoms is achieved by 3D optical lattices which constructed by four lasers; the temperature of the atoms is measured by time-of-flight method. We observed the cooling result that the temperature drops from ~60.0 μK to ~11.6 μK. We also explore the dependence of the atom numbers in the lattice on the frequency of lattice lasers, and lead to the conclusion that the loading rate of the optical lattices reaches its maximum when the lattices laser’s detuning is –15.5 GHz. In the meantime, this paper investigates the use of optical lattice to suppress the heating of the ultracold atoms due to the radiation photons, in this sense, our research has far-reaching significance. Our scheme is advantageous due to its relaxed starting temperature requirement, meaning that 3D DRSC can be directly accomplished in a standard single cell vapour-loaded MOT without reliance on any additional devices such as a Zeeman slower.