Quantum computers can perform computational tasks beyond the capability of classical computers, such as simulating quantum systems in materials science and chemistry. Quantum teleportation is the transfer of quantum information across distances, relying on entangled states generated by quantum computing. It is becoming a more secure way of sending information, but there is noise in the results. We sought to mitigate the error of quantum teleportation which was simulated on IBM cloud quantum computers. We hypothesized that the noise on all IBM quantum computers could be mitigated with noise-mitigation matrices. We created a quantum teleportation circuit which ran with shots of 500, 1000, 5000, and 8192 for four different qubit states. We studied general error trends in each machine and created two types of noise-mitigation matrices: universal and machine-specific. We then compared the mitigated results of both types of matrices. We found that there was noise for every IBM quantum computer during the trials. The universal noise-mitigation matrix for quantum teleportation for the three tested machines decreased the error for most trials and varied between 1%-5% for most cases after mitigation. The machine-specific noise-mitigation matrix mitigated the error of most machines to just 1-2%, which was a dramatic decrease from unmitigated results (varied between 1%-16% across three machines). The error rates for the machine-specific matrices have less variability than the universal mitigation matrix. We concluded that a universal mitigation matrix could be found for the three machines, but the machine-specific noise mitigation matrices were able to achieve more accurate results.
Quantum computers can perform computational tasks beyond the capability of classical computers, such as simulating quantum systems in materials science and chemistry. Quantum teleportation is the transfer of quantum information across distances, relying on entangled states generated by quantum computing. It is becoming a more secure way of sending information, but there is noise in the results. We sought to mitigate the error of quantum teleportation which was simulated on IBM cloud quantum computers. We hypothesized that the noise on all IBM quantum computers could be mitigated with noise-mitigation matrices. We created a quantum teleportation circuit which ran with shots of 500, 1000, 5000, and 8192 for four different qubit states. We studied general error trends in each machine and created two types of noise-mitigation matrices: universal and machine-specific. We then compared the mitigated results of both types of matrices. We found that there was noise for every IBM quantum computer during the trials. The universal noise-mitigation matrix for quantum teleportation for the three tested machines decreased the error for most trials and varied between 1%-5% for most cases after mitigation. The machine-specific noise-mitigation matrix mitigated the error of most machines to just 1-2%, which was a dramatic decrease from unmitigated results (varied between 1%-16% across three machines). The error rates for the machine-specific matrices have less variability than the universal mitigation matrix. We concluded that a universal mitigation matrix could be found for the three machines, but the machine-specific noise mitigation matrices were able to achieve more accurate results.
We explore the field of quantum computing and specifically address the crucial problem of error reduction in the context of IBM simulators. Although quantum computing is a rapidly developing technology with great potential, its practical applications are severely hindered by its inherent error-proneness. We tackle this problem by introducing new developments in quantum error correction techniques designed for IBM simulators. In contrast to conventional methods that frequently depend on large matrices or pre-established error models; our technique presents a flexible and dynamic approach. By utilizing several variations of a main circuit, in which classically efficient gates are used in place of non-Clifford gates, we are able to discover the best compensation scheme from scratch for actual quantum systems. The suggested method exhibits great flexibility in handling different levels of noise and different kinds of noise, such as spatially and temporally correlated variations. It also effectively reduces errors on IBM quantum hardware as well as precisely emulated imperfect quantum computers. By offering a thorough investigation of sophisticated error mitigation techniques, this research advances the continuing quest for dependable quantum computations and opens up interesting new directions for improving both the accuracy and performance of quantum computing operations carried out on IBM simulators.
Quantum computers have the potential to outperform classical computers for some complex computational problems. However, current quantum computers (e.g., from IBM and Google) have inherent noise that results in errors in the outputs of quantum software executing on the quantum computers, affecting the reliability of quantum software development. The industry is increasingly interested in machine learning (ML)-based error mitigation techniques, given their scalability and practicality. However, existing ML-based techniques have limitations, such as only targeting specific noise types or specific quantum circuits. This paper proposes a practical ML-based approach, called Q-LEAR, with a novel feature set, to mitigate noise errors in quantum software outputs. We evaluated Q-LEAR on eight quantum computers and their corresponding noisy simulators, all from IBM, and compared Q-LEAR with a state-of-the-art ML-based approach taken as baseline. Results show that, compared to the baseline, Q-LEAR achieved a 25% average improvement in error mitigation on both real quantum computers and simulators. We also discuss the implications and practicality of Q-LEAR, which, we believe, is valuable for practitioners.
Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.
In the quickly growing field of quantum computing, interference called “noise” causes discrepancies within the results of a quantum experiment. We aimed to observe the effects of noise on the quantum teleportation algorithm, which is used to transport the quantum state of one qubit to another qubit over distances. When the information in the teleportation algorithm is passed through noisy channels, the data can easily become corrupted. We conducted this study in order to observe the effects of noise on the information that travels through these channels. We aimed to understand the nature of the data corruption to help create improved and more faithful methods of data communication. Prior to conducting this study, we expected that the noise would have the most effect on the real and simulated backends and the least effect on the perfect backend. Through this study, we ran teleportation circuits on three different backends (a perfect simulation, a noisy simulation, and the real hardware) and compared the final results with our expected states. We observed that the predicted effects of noise on the information is accurate in some respects but that noise has the potential to drastically alter and corrupt the data. Moreover, the real hardware we used was far more susceptible to noise interference than the simulations. Our findings indicate that, to prevent the information from being compromised, other methods of noise reduction must be employed in conjunction with the quantum teleportation algorithm.
A detailed understanding of the noise processes and errors in near-term quantum computers is essential for accurate calibration of gates, and for achieving optimal performance when executing near-term applications such as quantum chemistry, optimization, or machine learning problems. This paper introduces several sources of noise in superconducting qubit based quantum computers such as those deployed by IBM, describes some of the main techniques for characterizing the resulting errors, and for mitigating the effects of certain errors without access to quantum error correction. We demonstrate experimental application of these techniques on an IBM Quantum system using the open source Qiskit software library.
Identifying dominant noise mechanisms is a central challenge in today’s noisy quantum devices, where every operation is affected by hardware imperfections. To investigate how noise manifests in quantum operations, this study employed a three-qubit teleportation circuit as an experimental probe. Ideal simulations, noisy simulations in Qiskit Aer (readout misassignment, depolarizing, biased Pauli, thermal relaxation), and runs on IBM Brisbane were compared after applying standard X and Z corrections in post-processing. Distinct patterns in the bitstring distributions showed that IBM hardware is dominated by readout-driven effects with mild bias in Pauli error probabilities. A short teleportation “probe” thus provides a simple, circuit-specific diagnostic test to guide noise mitigation. This study aims to determine whether bitstring distributions can serve as fingerprints for identifying dominant noise sources in quantum teleportation circuits.