Superconducting flux qubits have many advantages as a storage of quantum information, such as broad range tunability of frequency, small-size fabricability, and high controllability. In the flux qubit-oscillator, qubits are connected to SQUID resonators for the purpose of performing dispersive non-destructive readouts of qubit signals with high fidelity. In this work, we propose a theoretical model for analyzing quantum characteristics of a flux qubit-oscillator on the basis of quantum solutions obtained using a unitary transformation approach. The energy levels of the combined system (qubit + resonator) are analyzed in detail. Equally spaced each energy level of the resonator splits into two parts depending on qubit states. Besides, coupling of the qubit to the resonator brings about an additional modification in the split energy levels. So long as the coupling strength and the tunnel splitting are not zero but finite values, the energy-level splitting of the resonator does not disappear. We conclude that quantum nondemolition dispersive measurements of the qubit states are possible by inducing bifurcation of the resonator states through the coupling.
Superconducting flux qubits have many advantages as a storage of quantum information, such as broad range tunability of frequency, small-size fabricability, and high controllability. In the flux qubit-oscillator, qubits are connected to SQUID resonators for the purpose of performing dispersive non-destructive readouts of qubit signals with high fidelity. In this work, we propose a theoretical model for analyzing quantum characteristics of a flux qubit-oscillator on the basis of quantum solutions obtained using a unitary transformation approach. The energy levels of the combined system (qubit + resonator) are analyzed in detail. Equally spaced each energy level of the resonator splits into two parts depending on qubit states. Besides, coupling of the qubit to the resonator brings about an additional modification in the split energy levels. So long as the coupling strength and the tunnel splitting are not zero but finite values, the energy-level splitting of the resonator does not disappear. We conclude that quantum nondemolition dispersive measurements of the qubit states are possible by inducing bifurcation of the resonator states through the coupling.
We analyze the dispersive readout of superconducting charge and flux qubits as a quantum measurement process. The measurement oscillator frequency is considered much lower than the qubit frequency. This regime is interesting because large detuning allows for strong coupling between the measurement oscillator and the signal transmission line, thus allowing for fast readout. Due to the large detuning we may not use the rotating wave approximation in the oscillator-qubit coupling. Instead we start from an approximation where the qubit follows the oscillator adiabatically, and show that non-adiabatic corrections are small. We find analytic expressions for the measurement time, as well as for the back-action, both while measuring and in the off-state. The quantum efficiency is found to be unity within our approximation, both for charge and flux qubit readout.
The potential of superconducting qubits as the medium for a scalable quantum computer has motivated the pursuit of improved interactions within this system. Two challenges for the field of superconducting qubits are measurement fidelity, to accurately determine the state of the qubit, and the efficient transfer of quantum states. In measurement, the current state-of-the-art method employs dispersive readout, by coupling the qubit to a cavity and reading the resulting shift in cavity frequency to infer the qubit's state; however, this is vulnerable to Purcell relaxation, as well as being modeled off a simplified two-level abstraction of the qubit. In state transfer, the existing proposal for moving quantum states is mostly untested against non-idealities that will likely be present in an experiment. In this dissertation, we examine three problems within these two areas.We first describe a new scheme for fast and high-fidelity dispersive measurement specifically designed to circumvent the Purcell Effect. To do this, the qubit-resonator interaction is turned on only when the resonator is decoupled from the environment; then, after the resonator state has shifted enough to infer the qubit state, the qubit-resonator interaction is turned off before the resonator and environment are recoupled. We also show that the effectiveness of this ``Catch-Disperse-Release'' procedure partly originates from quadrature squeezing of the resonator state induced by the Jaynes-Cummings nonlinearity.The Catch-Disperse-Release measurement scheme treats the qubit as a two-level system, which is a common simplification used in theoretical works. However, the most promising physical candidate for a superconducting qubit, the transmon, is a multi-level system. In the second work, we examine the effects of including the higher energy levels of the transmon. Specifically, we expand the eigenstate picture developed in the first work to encompass multiple qubit levels, and examine the resulting changes to the system. In particular, we analyze the population of the non-target eigenstates as a result of this expanded model, and provide an analytical form for these deviations from the simpler model in Catch-Disperse-Release (i.e., the dressed state approximation).Lastly, we assess the robustness of the existing quantum state transfer protocol, testing its performance under typical experimental deviations from the ideal case. We show that the procedure is resilient to almost all non-idealities, except frequency mismatch between the two cavities. We also demonstrate a method to compensate for one such error in frequency-matching.
We theoretically study the quantum nondemolition measurements of a flux qubit coupled to a noisy superconducting quantum interference device (SQUID). The obtained analytical results indicate that the measurement probability is frequency-dependent in a short time scale and has a close relationship with the measurement-induced dephasing. Furthermore, when the detuning between the driven and bare resonator equals the coupling strength, we can obtain the maximum measurement rate that is determined by the character of the noise in the SQUID. Finally, we analysed the mixed effect caused by coupling between the non-diagonal term and the external variable. It is found that the initial information of the qubit is destroyed due to quantum tunneling between the qubit states.
The model of a two-level system (TLS) coupled to a harmonic oscillator has found a widespread application in physics and chemistry. In this thesis we focus on the field of circuit quantum electrodynamics where the TLS stands for a quantum bit (qubit), which is the basic building unit of a potential quantum computer, and the oscillator represents a transmission-line resonator, which can be used, e.g., to store information contained on the qubit or for communication between several qubits. Furthermore, the oscillator can model a superconducting quantum interference device (SQUID) determining the state of the qubit. In first experimental realizations the coupling between the qubit and the oscillator was small compared to characteristic frequencies of the two devices. In such a situation the Jaynes-Cummings model provides a realistic and completely analytical description of the energy spectrum and the dynamics of the setup. However, it relies on a rotating-wave approximation (RWA) which neglects counter-rotating terms in the full qubit-oscillator Hamiltonian. These counter-rotating terms become important under increase of the coupling strength, as it has been achieved in recent experiments. We present two analytical approaches to take these additional contributions into account: The first one treats the qubit-oscillator Hamiltonian perturbatively in the coupling strength and predicts a frequency shift in its energy spectrum, the Bloch-Siegert shift. The second one considers the qubit's tunneling splitting as small parameter and thus treats the problem to all orders in the coupling allowing to enter the ultrastrong coupling regime, where the coupling strength becomes comparable to the qubit's and/or oscillator's frequency. For both cases we give a thorough analysis of the qubit's dynamics. In order to perform operations the qubit is usually probed by an external driving force. We model this situation by coupling the TLS to a classical oscillator and examine the resulting time dependent Hamiltonian using a combination of Floquet theory and Van Vleck perturbation theory. Thus, we provide an analysis of the qubit's energy spectrum and dynamics which is nonperturbative in the driving amplitude. We investigate effects like coherent destruction of tunneling and driving-inducing tunneling oscillations. By coupling the driven TLS to a quantized oscillator we give for the first time an analytical treatment of the qubit-oscillator system being simultaneously exposed to both ultrastrong coupling and extreme driving. We observe interesting phenomena in the dynamics like the suppression of specific frequencies under a variation of the coupling strength. To mimic environmental influences on the qubit we apply the Caldeira-Leggett master equation approach to the driven TLS and to the qubit-oscillator system and provide for both cases analytical expressions for the relaxation and dephasing rates.
We analyze the relaxation of a superconducting flux qubit during measurement. The qubit state is measured with a nonlinear oscillator driven across the threshold of bifurcation, acting as a switching dispersive detector. This readout scheme is of quantum nondemolition type. Two successive readouts are used to analyze the evolution of the qubit and the detector during the measurement. We introduce a simple transition rate model for characterizing the qubit relaxation and the detector switching process. Corrected for qubit relaxation the readout fidelity is at least 95%. Qubit relaxation strongly depends on the driving strength and the state of the oscillator.
Quantum technologies, including those based on superconducting quantum circuits, require high-fidelity high-speed detection of the quantum state of a qubit. Standard quantum nondemolition readout of a superconducting qubit is based on its dispersive coupling to a resonator, but this method suffers from the Purcell effects: Purcell decay, critical photon number, and qubit-dependent Kerr nonlinearity. The authors propose a method in which both speed and fidelity of flux-qubit readout can avoid all three Purcell limitations.