Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0808.0464 · Physical Review B

Role of relaxation in the quantum measurement of a superconducting qubit using a nonlinear oscillator

Thomas Picot, Adrian Lupaşcu, Shiro Saito, C. J. P. M. Harmans, Johan E. Mooij

Published Oct 21, 2008• 46 citations
arXivHTMLPDF

Abstract

We analyze the relaxation of a superconducting flux qubit during measurement. The qubit state is measured with a nonlinear oscillator driven across the threshold of bifurcation, acting as a switching dispersive detector. This readout scheme is of quantum nondemolition type. Two successive readouts are used to analyze the evolution of the qubit and the detector during the measurement. We introduce a simple transition rate model for characterizing the qubit relaxation and the detector switching process. Corrected for qubit relaxation the readout fidelity is at least 95%. Qubit relaxation strongly depends on the driving strength and the state of the oscillator.

DOI
10.1103/physrevb.78.132508

Related papers

Quantum Time Evolution in a Qubit Readout Process with a Josephson Bifurcation Amplifier

Hayato Nakano, Shiro Saito, Kouichi Semba +1 more

We analyzed the Josephson bifurcation amplifier (JBA) readout process of a superconducting qubit quantum mechanically by calculating the dynamics of the density operator of a driven nonlinear oscillator and a qubit coupled system during the measurement process. In purely quantum cases, bifurcation is impossible. Introducing decoherence enables us to reproduce the bifurcation with a finite hysteresis. When a qubit is initially in a superposition state, we have observed the qubit-probe (JBA) entangled state, and it is divided into two separable states at the moment the JBA transition begins. This corresponds to "projection." To readout the measurement result, however, we must wait until the two JBA states are macroscopically well separated. The waiting time is determined by the strength of the decoherence in the JBA.

arXiv:0808.1798•Physical Review Letters•Jun 26, 2009•24 citations

Superconducting Qubit Measurement and Information Conversion from Quantum to Classical

Hayato Nakano

The Josephson bifurcation amplifier (JBA) readout process of a superconducting qubit is analyzed quantum mechanically. We examined the dynamics of the density operator of a detector (a driven nonlinear oscillator) and a qubit coupled system during the measurement process. We have observed the qubit-detector (JBA) entangled state and it is divided into two separable states at the moment the JBA transition begins. Moreover, we discuss the process from the viewpoint of time variations in information quantities, such as mutual information between the qubit and detector. We show that the measurement process corresponds to an information conversion from quantum to classical one.

Journal of Physics Conference Series•Jul 20, 2011•1 citation

Time-resolved qubit readout via nonlinear Josephson inductance

Georg M Reuther, David Zueco, Peter Hänggi A +1 more

We propose a generalization of dispersive qubit readout that provides the time evolution of a flux qubit observable.Our proposal relies on the nonlinear coupling of the qubit to a harmonic oscillator with high frequency, representing a dc superconducting quantum interference device.Information about the qubit dynamics is obtained by recording the oscillator response to resonant driving and subsequent lock-in detection.The measurement process is simulated for the example of coherent qubit oscillations.This corroborates the underlying measurement relation and also reveals that the measurement scheme possesses low backaction and high fidelity.

arXiv:1105.1105•New Journal of Physics•Sep 12, 2011•6 citations

Relaxation of a qubit measured by a driven Duffing oscillator

I. Serban, M. I. Dykman, Frank K. Wilhelm

We investigate the relaxation of a superconducting qubit for the case when its detector, the Josephson bifurcation amplifier, remains latched in one of its two (meta)stable states of forced vibrations. The qubit relaxation rates are different in different states. They can display strong dependence on the qubit frequency and resonant enhancement, which is due to quasienergy resonances. Coupling to the driven oscillator changes the effective temperature of the qubit.

arXiv:0907.5181•Physical Review A•Feb 5, 2010•24 citations

Dynamics of Dispersive Measurements of Flux-Qubit States: Energy-Level Splitting Connected to Quantum Wave Mechanics

Jeong Ryeol Choi

Superconducting flux qubits have many advantages as a storage of quantum information, such as broad range tunability of frequency, small-size fabricability, and high controllability. In the flux qubit-oscillator, qubits are connected to SQUID resonators for the purpose of performing dispersive non-destructive readouts of qubit signals with high fidelity. In this work, we propose a theoretical model for analyzing quantum characteristics of a flux qubit-oscillator on the basis of quantum solutions obtained using a unitary transformation approach. The energy levels of the combined system (qubit + resonator) are analyzed in detail. Equally spaced each energy level of the resonator splits into two parts depending on qubit states. Besides, coupling of the qubit to the resonator brings about an additional modification in the split energy levels. So long as the coupling strength and the tunnel splitting are not zero but finite values, the energy-level splitting of the resonator does not disappear. We conclude that quantum nondemolition dispersive measurements of the qubit states are possible by inducing bifurcation of the resonator states through the coupling.

Nanomaterials•Aug 23, 2023•0 citations

11 Time-resolved qubit readout via nonlinear Josephsoninductance

Georg M. Reuther, David Zueco, Sigmund Kohler

We propose a generalization of dispersive qubit readout that provides the time evolution of a flux qubit observable. Our proposal relies on the nonlinear coupling of the qubit to a harmonic oscillator with high frequency, representing a dc superconducting quantum interference device. Information about the qubit dynamics is obtained by recording the oscillator response to resonant driving and subsequent lock-in detection. The measurement process is simulated for the example of coherent qubit oscillations. This corroborates the underlying measurement relation and also reveals that the measurement scheme possesses low backaction and high fidelity.

•Aug 17, 2016•4 citations
We analyze the relaxation of a superconducting flux qubit during measurement. The qubit state is measured with a nonlinear oscillator driven across the threshold of bifurcation, acting as a switching dispersive detector. This readout scheme is of quantum nondemolition type. Two successive readouts are used to analyze the evolution of the qubit and the detector during the measurement. We introduce a simple transition rate model for characterizing the qubit relaxation and the detector switching process. Corrected for qubit relaxation the readout fidelity is at least 95%. Qubit relaxation strongly depends on the driving strength and the state of the oscillator.
We analyzed the Josephson bifurcation amplifier (JBA) readout process of a superconducting qubit quantum mechanically by calculating the dynamics of the density operator of a driven nonlinear oscillator and a qubit coupled system during the measurement process. In purely quantum cases, bifurcation is impossible. Introducing decoherence enables us to reproduce the bifurcation with a finite hysteresis. When a qubit is initially in a superposition state, we have observed the qubit-probe (JBA) entangled state, and it is divided into two separable states at the moment the JBA transition begins. This corresponds to "projection." To readout the measurement result, however, we must wait until the two JBA states are macroscopically well separated. The waiting time is determined by the strength of the decoherence in the JBA.
The Josephson bifurcation amplifier (JBA) readout process of a superconducting qubit is analyzed quantum mechanically. We examined the dynamics of the density operator of a detector (a driven nonlinear oscillator) and a qubit coupled system during the measurement process. We have observed the qubit-detector (JBA) entangled state and it is divided into two separable states at the moment the JBA transition begins. Moreover, we discuss the process from the viewpoint of time variations in information quantities, such as mutual information between the qubit and detector. We show that the measurement process corresponds to an information conversion from quantum to classical one.
We propose a generalization of dispersive qubit readout that provides the time evolution of a flux qubit observable.Our proposal relies on the nonlinear coupling of the qubit to a harmonic oscillator with high frequency, representing a dc superconducting quantum interference device.Information about the qubit dynamics is obtained by recording the oscillator response to resonant driving and subsequent lock-in detection.The measurement process is simulated for the example of coherent qubit oscillations.This corroborates the underlying measurement relation and also reveals that the measurement scheme possesses low backaction and high fidelity.
Superconducting flux qubits have many advantages as a storage of quantum information, such as broad range tunability of frequency, small-size fabricability, and high controllability. In the flux qubit-oscillator, qubits are connected to SQUID resonators for the purpose of performing dispersive non-destructive readouts of qubit signals with high fidelity. In this work, we propose a theoretical model for analyzing quantum characteristics of a flux qubit-oscillator on the basis of quantum solutions obtained using a unitary transformation approach. The energy levels of the combined system (qubit + resonator) are analyzed in detail. Equally spaced each energy level of the resonator splits into two parts depending on qubit states. Besides, coupling of the qubit to the resonator brings about an additional modification in the split energy levels. So long as the coupling strength and the tunnel splitting are not zero but finite values, the energy-level splitting of the resonator does not disappear. We conclude that quantum nondemolition dispersive measurements of the qubit states are possible by inducing bifurcation of the resonator states through the coupling.
We propose a generalization of dispersive qubit readout that provides the time evolution of a flux qubit observable. Our proposal relies on the nonlinear coupling of the qubit to a harmonic oscillator with high frequency, representing a dc superconducting quantum interference device. Information about the qubit dynamics is obtained by recording the oscillator response to resonant driving and subsequent lock-in detection. The measurement process is simulated for the example of coherent qubit oscillations. This corroborates the underlying measurement relation and also reveals that the measurement scheme possesses low backaction and high fidelity.