To demonstrate reliable and scalable quantum computation, we need quantum error correction to reduce its error rates. One of the most challenging parts of implementing quantum error correction is to design error-decoding units, which estimate errors during computation. We estimate the required performances of error-decoding units to run practical-scale quantum algorithms and discuss the directions to satisfy them.
To demonstrate reliable and scalable quantum computation, we need quantum error correction to reduce its error rates. One of the most challenging parts of implementing quantum error correction is to design error-decoding units, which estimate errors during computation. We estimate the required performances of error-decoding units to run practical-scale quantum algorithms and discuss the directions to satisfy them.
Quantum computing has the potential to transform information technology by offering algorithms for certain tasks, such as quantum simulation, that are vastly more efficient than what is possible with any classical device. But experimentally implementing practical quantum information processing is a very difficult task. Here we study two important, and closely related, aspects of this challenge: architectures for quantum computing, and quantum error correction Exquisite quantum control has now been achieved in small ion traps, in nitrogen-vacancy centres and in superconducting qubit clusters, but the challenge remains of how to scale these systems to build practical quantum devices. In Part I of this thesis we analyse one approach to building a scalable quantum computer by networking together many simple processor cells, thus avoiding the need to create a single complex structure. The difficulty is that realistic quantum links are very error prone. Here we describe a method by which even these error-prone cells can perform quantum error correction. Groups of cells generate and purify shared resource states, which then enable stabilization of topologically encoded data. Given a realistically noisy network (10% error rate) we find that our protocol can succeed provided that all intra-cell error rates are below 0.8%. Furthermore, we show that with some adjustments, the protocols we employ can be made robust also against high levels of loss in the network interconnects. We go on to analyse the potential running speed of such a device. Using levels of fidelity that are either already achievable in experimental systems, or will be in the near-future, we find that employing a surface code approach in a highly noisy and lossy network architecture can result in kilohertz computer clock speeds. In Part II we consider the question of quantum error correction beyond the surface code. We consider several families of topological codes, and determine the minimum requirements to demonstrate proof-of-principle error suppression in each type of code. A particularly promising code is the gauge color code, which admits a universal transversal gate set. Furthermore, a recent result of Bombin shows the gauge color code supports an error-correction protocol that achieves tolerance to noisy measurements without the need for repeated measurements, so called single-shot error correction. Here, we demonstrate the promise of single-shot error correction by designing a decoder and investigating its performance. We simulate fault-tolerant error correction with the gauge color code, and estimate a sustainable error rate, i.e. the threshold for the long time limit, of ~0.31% for a phenomenological noise model using a simple decoding algorithm.
A reliable large-scale quantum computer would be able to solve problems in physics and chemistry exponentially faster than current classical processors. A large-scale quantum device has not been built because quantum systems are naturally sensitive to environmental influences which manifest as errors in memory and operations during computation. For a large-scale device to become a reality, protocols must be developed that reduce the influence of errors during computation in a manner that maintains scalability of the device. This scalability criteria requires the protocols developed to handle errors must be implemented in a way such that the size of the quantum system and number of operations grows in a tractable manner. Furthermore, the sources of errors must be modeled accurately for true assessments of the viability of these protocols. In this dissertation, we present an investigation into methods of performing reliable quantum computation in the presence of errors in small quantum systems (< 50 qubits). These methods should be considered as software primitives used to built reliable large-scale quantum algorithms and quantum memories. These methods occur in two flavors: quantum error correction and fault-tolerant operations. For quantum error correction, we perform assessments of error correction in the presence of error sources indicative of ion trap quantum computers. For fault-tolerant operations, we investigate the quantum resource cost and efficacy of implementing various techniques for performing reliable operations that would allow for a quantum advantange in a large-scale device.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Quantum error correction (QEC) represents the cornerstone technology for realizing fault-tolerant quantum computing, addressing the fundamental challenge of quantum state decoherence in noisy intermediate-scale quantum (NISQ) devices. This comprehensive review examines recent advances in QEC implementations from 2020-2024, spanning theoretical foundations to practical hardware demonstrations. We analyze the evolution from pioneering stabilizer codes to modern topological approaches, with particular emphasis on surface codes and low-density parity-check (LDPC) codes that have demonstrated below-threshold error correction in superconducting and trapped-ion systems. The paper provides a comparative analysis of classical and machine learning-based decoder algorithms, evaluating their performance through complexity analysis and threshold comparisons in real-time error correction scenarios. Through examination of breakthrough experiments by Google, IBM, Quantinuum, and emerging platforms, we assess the current state of fault-tolerant quantum computing and identify critical engineering challenges including correlated noise models, cryogenic control systems, and scalable logical gate implementations. Our quantitative analysis reveals that while significant progress has been made toward practical fault-tolerance thresholds, achieving the resource efficiency and reliability required for large-scale quantum computation remains challenging. We provide detailed resource estimates for key applications including Shor's algorithm and optimization problems, along with analysis of industry roadmaps toward thousand-logical-qubit systems. This review serves as a comprehensive guide for researchers and engineers working toward the next generation of fault-tolerant quantum computers, with particular focus on information-theoretic perspectives relevant to quantum information entropy and syndrome processing.
Quantum error correction (QEC) represents the cornerstone technology for realizing fault-tolerant quantum computing, addressing the fundamental challenge of quantum state decoherence in noisy intermediate-scale quantum (NISQ) devices. This comprehensive review examines recent advances in QEC implementations from 2020-2024, spanning theoretical foundations to practical hardware demonstrations. We analyze the evolution from pioneering stabilizer codes to modern topological approaches, with particular emphasis on surface codes and low-density parity-check (LDPC) codes that have demonstrated below-threshold error correction in superconducting and trapped-ion systems. The paper provides a comparative analysis of classical and machine learning-based decoder algorithms, evaluating their performance through complexity analysis and threshold comparisons in real-time error correction scenarios. Through examination of breakthrough experiments by Google, IBM, Quantinuum, and emerging platforms, we assess the current state of fault-tolerant quantum computing and identify critical engineering challenges including correlated noise models, cryogenic control systems, and scalable logical gate implementations. Our quantitative analysis reveals that while significant progress has been made toward practical fault-tolerance thresholds, achieving the resource efficiency and reliability required for large-scale quantum computation remains challenging. We provide detailed resource estimates for key applications including Shor's algorithm and optimization problems, along with analysis of industry roadmaps toward thousand-logical-qubit systems. This review serves as a comprehensive guide for researchers and engineers working toward the next generation of fault-tolerant quantum computers, with particular focus on information-theoretic perspectives relevant to quantum information entropy and syndrome processing.
Large error rates of quantum bits (qubits) are one of the main difficulties in the development of quantum computing. Performing quantum error correction (QEC) with surface codes is considered the most promising approach to reduce the error rates of qubits effectively. To perform error correction, we need an error-decoding unit, which estimates errors in the noisy physical qubits repetitively, to create a robust logical qubit. While complicated graph-matching problems must be solved within a strict time restriction for the error decoding, several hardware implementations that satisfy the restriction at a large code distance have been proposed.