Quantum computing has the potential to transform information technology by offering algorithms for certain tasks, such as quantum simulation, that are vastly more efficient than what is possible with any classical device. But experimentally implementing practical quantum information processing is a very difficult task. Here we study two important, and closely related, aspects of this challenge: architectures for quantum computing, and quantum error correction Exquisite quantum control has now been achieved in small ion traps, in nitrogen-vacancy centres and in superconducting qubit clusters, but the challenge remains of how to scale these systems to build practical quantum devices. In Part I of this thesis we analyse one approach to building a scalable quantum computer by networking together many simple processor cells, thus avoiding the need to create a single complex structure. The difficulty is that realistic quantum links are very error prone. Here we describe a method by which even these error-prone cells can perform quantum error correction. Groups of cells generate and purify shared resource states, which then enable stabilization of topologically encoded data. Given a realistically noisy network (10% error rate) we find that our protocol can succeed provided that all intra-cell error rates are below 0.8%. Furthermore, we show that with some adjustments, the protocols we employ can be made robust also against high levels of loss in the network interconnects. We go on to analyse the potential running speed of such a device. Using levels of fidelity that are either already achievable in experimental systems, or will be in the near-future, we find that employing a surface code approach in a highly noisy and lossy network architecture can result in kilohertz computer clock speeds. In Part II we consider the question of quantum error correction beyond the surface code. We consider several families of topological codes, and determine the minimum requirements to demonstrate proof-of-principle error suppression in each type of code. A particularly promising code is the gauge color code, which admits a universal transversal gate set. Furthermore, a recent result of Bombin shows the gauge color code supports an error-correction protocol that achieves tolerance to noisy measurements without the need for repeated measurements, so called single-shot error correction. Here, we demonstrate the promise of single-shot error correction by designing a decoder and investigating its performance. We simulate fault-tolerant error correction with the gauge color code, and estimate a sustainable error rate, i.e. the threshold for the long time limit, of ~0.31% for a phenomenological noise model using a simple decoding algorithm.
Quantum computing has the potential to transform information technology by offering algorithms for certain tasks, such as quantum simulation, that are vastly more efficient than what is possible with any classical device. But experimentally implementing practical quantum information processing is a very difficult task. Here we study two important, and closely related, aspects of this challenge: architectures for quantum computing, and quantum error correction Exquisite quantum control has now been achieved in small ion traps, in nitrogen-vacancy centres and in superconducting qubit clusters, but the challenge remains of how to scale these systems to build practical quantum devices. In Part I of this thesis we analyse one approach to building a scalable quantum computer by networking together many simple processor cells, thus avoiding the need to create a single complex structure. The difficulty is that realistic quantum links are very error prone. Here we describe a method by which even these error-prone cells can perform quantum error correction. Groups of cells generate and purify shared resource states, which then enable stabilization of topologically encoded data. Given a realistically noisy network (10% error rate) we find that our protocol can succeed provided that all intra-cell error rates are below 0.8%. Furthermore, we show that with some adjustments, the protocols we employ can be made robust also against high levels of loss in the network interconnects. We go on to analyse the potential running speed of such a device. Using levels of fidelity that are either already achievable in experimental systems, or will be in the near-future, we find that employing a surface code approach in a highly noisy and lossy network architecture can result in kilohertz computer clock speeds. In Part II we consider the question of quantum error correction beyond the surface code. We consider several families of topological codes, and determine the minimum requirements to demonstrate proof-of-principle error suppression in each type of code. A particularly promising code is the gauge color code, which admits a universal transversal gate set. Furthermore, a recent result of Bombin shows the gauge color code supports an error-correction protocol that achieves tolerance to noisy measurements without the need for repeated measurements, so called single-shot error correction. Here, we demonstrate the promise of single-shot error correction by designing a decoder and investigating its performance. We simulate fault-tolerant error correction with the gauge color code, and estimate a sustainable error rate, i.e. the threshold for the long time limit, of ~0.31% for a phenomenological noise model using a simple decoding algorithm.
Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.
Quantum computing has enormous potential, but this can only be realised if quantum errors can be controlled sufficiently to allow quantum algorithms to be completed reliably. However, quantum-error-corrected logical quantum bits (qubits) which can be said to have achieved meaningful error suppression have not yet been demonstrated. This thesis reports research on several topics related to the challenge of designing fault-tolerant quantum computers. The first topic is a proposal for achieving large-scale error correction with the surface code in a silicon donor based quantum computing architecture. This proposal relaxes some of the stringent requirements in donor placement precision set by previous ideas from the single atom level to the order of 10 nm in some regimes. This is shown by means of numerical simulation of the surface code threshold. The second topic then follows, it is the development of a method for benchmarking and assessing the performance of small error correcting codes in few-qubit systems, introducing a metric called 'integrity' - closely linked to the trace distance -- and a proposal for experiments to demonstrate various stepping stones on the way to 'strictly superior' quantum error correction. Most quantum error correcting codes, including the surface code, do not allow for fault-tolerant universal computation without the addition of extra gadgets. One method of achieving universality is through a process of distilling and then consuming high quality 'magic states'. This process adds additional overhead to quantum computation over and above that incurred by the use of the base level quantum error correction. The latter parts of this thesis report an investigation into how many physical qubits are needed in a `magic state factory' within a surface code quantum computer and introduce a number of techniques to reduce the overhead of leading magic state techniques. It is found that universal quantum computing is achievable with ∼ 16 million qubits if error rates across a device are kept below 10-4. In addition, the thesis introduces improved methods of achieving magic state distillation for unconventional magic states that allow for logical small angle rotations, and show that this can be more efficient than synthesising these operations from the gates provided by traditional magic states.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Quantum error correction (QEC) represents the cornerstone technology for realizing fault-tolerant quantum computing, addressing the fundamental challenge of quantum state decoherence in noisy intermediate-scale quantum (NISQ) devices. This comprehensive review examines recent advances in QEC implementations from 2020-2024, spanning theoretical foundations to practical hardware demonstrations. We analyze the evolution from pioneering stabilizer codes to modern topological approaches, with particular emphasis on surface codes and low-density parity-check (LDPC) codes that have demonstrated below-threshold error correction in superconducting and trapped-ion systems. The paper provides a comparative analysis of classical and machine learning-based decoder algorithms, evaluating their performance through complexity analysis and threshold comparisons in real-time error correction scenarios. Through examination of breakthrough experiments by Google, IBM, Quantinuum, and emerging platforms, we assess the current state of fault-tolerant quantum computing and identify critical engineering challenges including correlated noise models, cryogenic control systems, and scalable logical gate implementations. Our quantitative analysis reveals that while significant progress has been made toward practical fault-tolerance thresholds, achieving the resource efficiency and reliability required for large-scale quantum computation remains challenging. We provide detailed resource estimates for key applications including Shor's algorithm and optimization problems, along with analysis of industry roadmaps toward thousand-logical-qubit systems. This review serves as a comprehensive guide for researchers and engineers working toward the next generation of fault-tolerant quantum computers, with particular focus on information-theoretic perspectives relevant to quantum information entropy and syndrome processing.
Quantum error correction (QEC) represents the cornerstone technology for realizing fault-tolerant quantum computing, addressing the fundamental challenge of quantum state decoherence in noisy intermediate-scale quantum (NISQ) devices. This comprehensive review examines recent advances in QEC implementations from 2020-2024, spanning theoretical foundations to practical hardware demonstrations. We analyze the evolution from pioneering stabilizer codes to modern topological approaches, with particular emphasis on surface codes and low-density parity-check (LDPC) codes that have demonstrated below-threshold error correction in superconducting and trapped-ion systems. The paper provides a comparative analysis of classical and machine learning-based decoder algorithms, evaluating their performance through complexity analysis and threshold comparisons in real-time error correction scenarios. Through examination of breakthrough experiments by Google, IBM, Quantinuum, and emerging platforms, we assess the current state of fault-tolerant quantum computing and identify critical engineering challenges including correlated noise models, cryogenic control systems, and scalable logical gate implementations. Our quantitative analysis reveals that while significant progress has been made toward practical fault-tolerance thresholds, achieving the resource efficiency and reliability required for large-scale quantum computation remains challenging. We provide detailed resource estimates for key applications including Shor's algorithm and optimization problems, along with analysis of industry roadmaps toward thousand-logical-qubit systems. This review serves as a comprehensive guide for researchers and engineers working toward the next generation of fault-tolerant quantum computers, with particular focus on information-theoretic perspectives relevant to quantum information entropy and syndrome processing.
The constituent parts of a quantum computer are inherently vulnerable to errors. To this end, we have developed quantum error-correcting codes to protect quantum information from noise. However, discovering codes that are capable of a universal set of computational operations with the minimal cost in quantum resources remains an important and ongoing challenge. One proposal of significant recent interest is the gauge color code. Notably, this code may offer a reduced resource cost over other well-studied fault-tolerant architectures by using a new method, known as gauge fixing, for performing the non-Clifford operations that are essential for universal quantum computation. Here we examine the gauge color code when it is subject to noise. Specifically, we make use of single-shot error correction to develop a simple decoding algorithm for the gauge color code, and we numerically analyse its performance. Remarkably, we find threshold error rates comparable to those of other leading proposals. Our results thus provide the first steps of a comparative study between the gauge color code and other promising computational architectures.