Abstract Crosstalk is the main noise source in quantum computing devices. In quantum computation, the parallel execution of multiple instructions will cause crosstalk, destroy the quantum state, and cause the program to fail to execute correctly. Overcoming the influence of crosstalk is a key requirement for quantum error correction and large-scale fault-tolerant quantum computing. This paper presents a method to suppress crosstalk in quantum computers based on multiple instruction exchange rules and duration. Several Benchmarks experiments verify the effectiveness of the proposed method. Compared with the prior techniques, the fidelity of the proposed method is improved by 15.97% on average.
Abstract Crosstalk is the main noise source in quantum computing devices. In quantum computation, the parallel execution of multiple instructions will cause crosstalk, destroy the quantum state, and cause the program to fail to execute correctly. Overcoming the influence of crosstalk is a key requirement for quantum error correction and large-scale fault-tolerant quantum computing. This paper presents a method to suppress crosstalk in quantum computers based on multiple instruction exchange rules and duration. Several Benchmarks experiments verify the effectiveness of the proposed method. Compared with the prior techniques, the fidelity of the proposed method is improved by 15.97% on average.
Crosstalk is the primary source of noise in quantum computing equipment. The parallel execution of multiple instructions in quantum computation causes crosstalk, which causes coupling between signal lines and mutual inductance and capacitance between signal lines, destroying the quantum state and causing the program to fail to execute correctly. Overcoming crosstalk is a critical prerequisite for quantum error correction and large-scale fault-tolerant quantum computing. This paper provides an approach for suppressing crosstalk in quantum computers based on multiple instruction exchange rules and duration. Firstly, for the majority of the quantum gates that can be executed on quantum computing devices, a multiple instruction exchange rule is proposed. The multiple instruction exchange rule reorders quantum gates in quantum circuits and separates double quantum gates with high crosstalk on quantum circuits. Then, time stakes are inserted based on the duration of different quantum gates, and quantum gates with high crosstalk are carefully separated in the process of quantum circuit execution by quantum computing equipment to reduce the influence of crosstalk on circuit fidelity. Several benchmark experiments verify the proposed method's effectiveness. In comparison to previous techniques, the proposed method improves fidelity by 15.97% on average.
Crosstalk is one of the major types of noise in quantum computers. To design high-fidelity quantum gates and large-scale quantum computers, effectively suppressing crosstalk is becoming increasingly important. Previous approaches to mitigate crosstalk rely on either hardware strategies, which are only applicable on limited platforms, or software techniques, which, however, cannot fully explore instruction parallelism. To address the above challenges, we propose a commutativity based compile-time instruction reordering approach. We first propose a complete set of generalized commutativity rules for main types of quantum gates, and then we design a two-level bidirectional reordering algorithm to reorder gates according to these rules for effective crosstalk mitigation. Our approach can not only capture both forward and backward instruction correlations but also reduce the effect of decoherence. We evaluate our approach with 117 quantum programs. Compared with the state-of-the-art, our approach can improve program fidelity by up to 120% (18% on average).
Crosstalk is a major source of noise in Noisy Intermediate-Scale Quantum (NISQ) systems and is a fundamental challenge for hardware design. When multiple instructions are executed in parallel, crosstalk between the instructions can corrupt the quantum state and lead to incorrect program execution. Our goal is to mitigate the application impact of crosstalk noise through software techniques. This requires (i) accurate characterization of hardware crosstalk, and (ii) intelligent instruction scheduling to serialize the affected operations. Since crosstalk characterization is computationally expensive, we develop optimizations which reduce the characterization overhead. On 3 20-qubit IBMQ systems, we demonstrate two orders of magnitude reduction in characterization time (compute time on the QC device) compared to all-pairs crosstalk measurements. Informed by these characterization, we develop a scheduler that judiciously serializes high crosstalk instructions balancing the need to mitigate crosstalk and exponential decoherence errors from serialization. On real-system runs on 3 IBMQ systems, our scheduler improves the error rate of application circuits by up to 5.6x, compared to the IBM instruction scheduler and offers near-optimal crosstalk mitigation in practice.
Current advancements in technology have focused the attention of the quantum computing community toward exploring the potential of near-term devices whose computing power surpasses that of classical computers in practical applications. An unresolved central question revolves around whether the inherent noise in these devices can be overcome or whether any potential quantum advantage would be limited. There is no doubt that crosstalk is one of the main sources of noise in noisy intermediate-scale quantum (NISQ) systems, and it poses a fundamental challenge to hardware designs. Crosstalk between parallel instructions can corrupt quantum states and cause incorrect program execution. In this study, we present a necessary analysis of the crosstalk error effect on NISQ devices. Our approach is extremely straightforward and practical to estimate the crosstalk error of various multi-qubit devices. In particular, we combine the randomized benchmarking (RB) and simultaneous randomized benchmarking (SRB) protocol to estimate the crosstalk error from the correlation controlled-NOT (CNOT) gate. We demonstrate this protocol experimentally on 5-, 7-, \& 16-qubit devices. Our results demonstrate the crosstalk error model of three different IBM quantum devices over the experimental week and compare the error variation against the machine, number of qubits, quantum volume, processor, and topology. We then confirm the improvement in the circuit fidelity on different benchmarks by up to 3.06x via inserting an instruction barrier, as compared with an IBM quantum noisy device which offers near-optimal crosstalk mitigation in practice. Finally, we discuss the current system limitation, its tradeoff on fidelity and depth, noise beyond the NISQ system, and mitigation opportunities to ensure that the quantum operation can perform its quantum magic undisturbed.
Noisy Intermediate-Scale Quantum (NISQ) hardware has unavoidable noises, and crosstalk error is a significant error source. When multiple quantum operations are executed simultaneously, the quantum state can be corrupted due to the crosstalk between gates during simultaneous operations, decreasing the circuit fidelity. In this work, we first report on several protocols for characterizing crosstalk. Then, we discuss different crosstalk mitigation methods from the hardware and software perspectives. Finally, we perform crosstalk injection experiments on the IBM quantum device and demonstrate the fidelity improvement with the crosstalk mitigation method.
Physical qubits in experimental quantum information processors are inevitably exposed to different sources of noise and imperfections, which lead to errors that typically accumulate hindering our ability to perform long computations reliably. Progress towards scalable and robust quantum computation relies on exploiting quantum error correction (QEC) to actively battle these undesired effects. In this work, we present a comprehensive study of crosstalk errors in a quantum-computing architecture based on a single string of ions confined by a radio-frequency trap, and manipulated by individually-addressed laser beams. This type of errors affects spectator qubits that, ideally, should remain unaltered during the application of single- and two-qubit quantum gates addressed at a different set of active qubits. We microscopically model crosstalk errors from first principles and present a detailed study showing the importance of using a coherent vs incoherent error modelling and, moreover, discuss strategies to actively suppress this crosstalk at the gate level. Finally, we study the impact of residual crosstalk errors on the performance of fault-tolerant QEC numerically, identifying the experimental target values that need to be achieved in near-term trapped-ion experiments to reach the break-even point for beneficial QEC with low-distance topological codes.