The use of rare earth ions (REIs)—typically embedded as atomic defects in solids—has emerged as a promising strategy for practical quantum memories. In particular, the Er ion has garnered significant attention due to its telecom C-band optical transition, which makes it a suitable candidate for integration into existing optical fiber networks without the need for photon wavelength conversion. However, successful scalability of such a quantum memory platform would benefit greatly from employing a host material that is fully compatible with silicon and modern CMOS fabrication processes. In this study, we present the synthesis of Er-doped TiO2 thin films directly on standard silicon or silicon-on-insulator (SOI) substrates using atomic layer deposition (ALD). Our thin film exhibits favorable emitter properties at cryogenic temperatures (T = 3.5 K), including a narrow inhomogeneous linewidth and optical lifetime approaching that of bulk values. Additionally, the ALD process provides ample opportunities for device fabrication and integration with other components, further enhancing its potential for practical applications. Overall, our findings suggest that Er-doped TiO2 thin films synthesized via ALD represent a promising approach for developing practical quantum memories that can be seamlessly integrated with silicon photonics. This work lays a foundation for the development of quantum technologies with potential applications in communication, computing, and cryptography.
The use of rare earth ions (REIs)—typically embedded as atomic defects in solids—has emerged as a promising strategy for practical quantum memories. In particular, the Er ion has garnered significant attention due to its telecom C-band optical transition, which makes it a suitable candidate for integration into existing optical fiber networks without the need for photon wavelength conversion. However, successful scalability of such a quantum memory platform would benefit greatly from employing a host material that is fully compatible with silicon and modern CMOS fabrication processes. In this study, we present the synthesis of Er-doped TiO2 thin films directly on standard silicon or silicon-on-insulator (SOI) substrates using atomic layer deposition (ALD). Our thin film exhibits favorable emitter properties at cryogenic temperatures (T = 3.5 K), including a narrow inhomogeneous linewidth and optical lifetime approaching that of bulk values. Additionally, the ALD process provides ample opportunities for device fabrication and integration with other components, further enhancing its potential for practical applications. Overall, our findings suggest that Er-doped TiO2 thin films synthesized via ALD represent a promising approach for developing practical quantum memories that can be seamlessly integrated with silicon photonics. This work lays a foundation for the development of quantum technologies with potential applications in communication, computing, and cryptography.
The use of trivalent erbium (Er3+), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunications devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface makes it an ideal candidate for integration into existing optical fiber networks without the need for quantum frequency conversion. However, successful scaling requires a host material with few intrinsic nuclear spins, compatibility with semiconductor foundry processes, and straightforward integration with silicon photonics. Here, we present Er-doped titanium dioxide (TiO2) thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process with a wide range of doping control over the Er concentration. Even though the as-grown films are amorphous, after oxygen annealing they exhibit relatively large crystalline grains, and the embedded Er ions exhibit the characteristic optical emission spectrum from anatase TiO2. Critically, this growth and annealing process maintains the low surface roughness required for nanophotonic integration. Finally, we interface Er ensembles with high quality factor Si nanophotonic cavities via evanescent coupling and demonstrate a large Purcell enhancement (300) of their optical lifetime. Our findings demonstrate a low-temperature, non-destructive, and substrate-independent process for integrating Er-doped materials with silicon photonics. At high doping densities this platform can enable integrated photonic components such as on-chip amplifiers and lasers, while dilute concentrations can realize single ion quantum memories.
Development of a Scalable Quantum Memory Platform -- Materials Science of Erbium-Doped TiO2 Thin Films on Silicon
Rare-earth ions (REI) have emerged as an attractive candidate for solid-state qubits, particularly as a quantum memory. Their 4f-4f transitions are shielded by filled 5s and 5p orbitals, offering a degree of protection from external electric fields. Embedded within a thin film oxide host, REIs could enable a qubit platform with significant memory capabilities. Furthermore, a silicon-compatible thin film form factor would enable the use of standard semiconductor fabrication processes to achieve chip-based integrability and scalability for functional quantum networks. Towards this goal, we have carried out optical and microstructural studies of erbium-doped polycrystalline and epitaxial TiO2 thin films on Si (100), r-sapphire, and SrTiO3 (100). We observe that the inhomogeneous optical linewidth of the Er photoluminescence is comparable or better for polycrystalline Er:TiO2(grown on Si) in comparison to single crystal epitaxial films on sapphire or SrTiO3, implying a relative insensitivity to extended defects. We investigated the effect of the film/substrate and film/air interface and found that the inhomogeneous linewidth and spectral diffusion can be significantly improved via bottom buffer and top capping layers of undoped TiO2. Using such approaches, we obtain inhomogeneous linewidths of 5.2 GHz and spectral diffusion of 180 MHz in Er:TiO2 /Si(100) films and have demonstrated the engineerability of quantum-relevant properties in these thin films.
High Resolution Image Download MS PowerPoint Slide The use of trivalent erbium (Er 3+ ), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunication devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface make it an ideal candidate for integration into existing optical fiber networks without the need for quantum frequency conversion. However, successful scaling requires a host material with few intrinsic nuclear spins, compatibility with semiconductor foundry processes, and straightforward integration with silicon photonics. Here, we present Er-doped titanium dioxide (TiO 2 ) thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process with a wide range of doping controls over the Er concentration. Even though the as-grown films are amorphous after oxygen annealing, they exhibit relatively large crystalline grains, and the embedded Er ions exhibit the characteristic optical emission spectrum from anatase TiO 2 . Critically, this growth and annealing process maintains the low surface roughness required for nanophotonic integration. Finally, we interface Er ensembles with high quality factor Si nanophotonic cavities via evanescent coupling and demonstrate a large Purcell enhancement (≈300) of their optical lifetime. Our findings demonstrate a low-temperature, nondestructive, and substrate-independent process for integrating Er-doped materials with silicon photonics. At high doping densities this platform can enable integrated photonic components such as on-chip amplifiers and lasers, while dilute concentrations can realize single ion quantum memories.
Rare-earth ions (REIs) doped into solid-state crystal hosts offer an attractive platform for realizing quantum interconnects that can function as quantum memories and quantum repeaters. The 4f valence electrons of REIs are shielded by 5s and 5p electrons and undergo highly coherent transitions even when embedded in host crystals. In particular, Er3+ has an optical transition in the telecom band that is suitable for low-loss communication. Recently, REIs in thin film systems have gained interest due to potential advantages in providing a flexible host crystal environment, enabling scalable on-chip integration with other quantum devices. Here, we investigate the structural and optical properties of Er-doped anatase TiO2 thin films on LaAlO3 (001) substrates. By choosing a system with minimal lattice mismatch and adjusting Er-dopant concentration, we achieve optical inhomogeneous linewidths of 5 GHz at 4.5 K. We show that 9 nm-thick buffer and capping layers can reduce the linewidth by more than 40%, suggesting a pathway to further narrowing linewidths in this system. We also identify that Er3+ ions mainly incorporate into substitutional Ti4+ sites with non-polar D2d symmetry, which makes Er dopants insensitive to the first order to local electric fields from impurities and is desirable for coherence properties of Er3+ spins.
Atomic layer deposited (ALD) Y 2 O 3 thin films have been thoroughly investigated for optical or electronic applications. The coherent spectroscopy of lanthanide ions doped into this material has also recently attracted increasing interest in the field of quantum technologies for which they are considered promising candidates in quantum memories or as spin–photon interfaces. However, these most demanding applications require a deep control over the local positioning of the ions and their close environment in the crystalline matrix. This study focuses on the structural as well as optical properties of Eu 3+ and Er 3+ dopants in Y 2 O 3 using photoluminescence (PL), luminescence decay times, and inhomogeneous line width (Γ inh ) measurements within this particular context. While as-grown ALD films do not provide an ideal host for the emitters, we demonstrate that by optimizing the deposition conditions and using appropriate annealing post treatments narrow inhomogeneous lines can be obtained for the 7 F 0 ↔ 5 D 0 transition of Eu 3+ even for nanoscale films. Furthermore, about 1.5 ms lifetime has been measured for the infrared telecom transition of Er in ultrathin films (<10 nm), which is an order of magnitude higher than in nanoparticles of the same size. These results validate optimized rare-earth-doped ALD Y 2 O 3 films as a suitable platform for photonics applications where few-nanometer-thick films with well-localized emitters are mandatory. This approach provides the first building blocks toward the development of more complex devices for quantum sensing or hybrid structures coupled with other systems such as two-dimensional materials.
Rare-earth ion doped oxide thin films integrated on silicon substrates provide a route toward scalable, chip-scale platforms for quantum coherent devices. Erbium-doped TiO2 is an attractive candidate: the Er3+ optical transition is compatible with C-band optical fiber communications, while TiO2 is an insulating dielectric compatible with silicon process technology. Through structural and optical studies of Er-doped TiO2 thin films grown via molecular beam deposition on silicon, SrTiO3, and sapphire substrates, we have explored the impact of polycrystallinity and microstructure on the optical properties of the Er emission. Comparing polycrystalline TiO2(rutile)/Si with single-crystalline TiO2(rutile)/r-sapphire and polycrystalline TiO2(anatase)/Si with single-crystalline TiO2(anatase)/SrTiO3, we observe that the inhomogeneous linewidth (Γinh) of the most prominent peak in the Er spectrum (the Y1–Z1 transition, 1520 and 1533 nm in rutile and anatase TiO2) is significantly narrower in the polycrystalline case. This implies a relative insensitivity to extended structural defects and grain boundaries in such films (as opposed to, e.g., point defects). We show that the growth of an undoped, underlying TiO2 buffer on Si can reduce Γinh by a factor of 4–5. Expectedly, Γinh also reduces with decreasing Er concentrations: we observe a ∼2 order of magnitude reduction from ∼1000 ppm Er to ∼10 ppm Er. Γinh then gets limited to a residual value of ∼5 GHz that is insensitive to further reduction in the Er concentration. Based upon the above results, we argue that the optical properties in these thin films are limited by the presence of high “grown-in” point defect concentrations.