Optical integrated quantum computing protocols, in particular using the dual-rail encoding, require that waveguides cross each other to realize, e.g., SWAP or Toffoli gate operations. We demonstrate efficient adiabatic crossings. The working principle is explained using simulations, and several test circuits are fabricated in silicon nitride (SiN) to characterize the coupling performance and insertion loss. Well-working crossings are found by experimentally varying the coupler parameters. The adiabatic waveguide crossing (WgX) outperforms a normal directional coupler in terms of spectral working range and fabrication variance stability. The insertion loss is determined using two different methods: using the transmission and by incorporating crossings in microring resonators. We show that the latter method is very efficient for low-loss photonic components. The lowest insertion loss is 0.18 dB (4.06%) enabling high-fidelity NOT operations. The presented WgX represents a high-fidelity (96.2%) quantum NOT operation.
Optical integrated quantum computing protocols, in particular using the dual-rail encoding, require that waveguides cross each other to realize, e.g., SWAP or Toffoli gate operations. We demonstrate efficient adiabatic crossings. The working principle is explained using simulations, and several test circuits are fabricated in silicon nitride (SiN) to characterize the coupling performance and insertion loss. Well-working crossings are found by experimentally varying the coupler parameters. The adiabatic waveguide crossing (WgX) outperforms a normal directional coupler in terms of spectral working range and fabrication variance stability. The insertion loss is determined using two different methods: using the transmission and by incorporating crossings in microring resonators. We show that the latter method is very efficient for low-loss photonic components. The lowest insertion loss is 0.18 dB (4.06%) enabling high-fidelity NOT operations. The presented WgX represents a high-fidelity (96.2%) quantum NOT operation.
The design, fabrication, and detailed calibration of essential building blocks towards fully integrated linear-optics quantum computation are discussed. Photonic devices are made from silicon nitride rib waveguides, where measurements on ring resonators show small propagation losses. Directional couplers are designed to be insensitive to fabrication variations. Their offset and coupling lengths are measured, as well as the phase difference between the transmitted and reflected light. With careful calibrations, the insertion loss of the directional couplers is found to be small. Finally, an integrated controlled-NOT circuit is characterized by measuring the transmission through different combinations of inputs and outputs. The gate fidelity for the CNOT operation with this circuit is estimated to be 99.81% after post selection. This high fidelity is due to our robust design, good fabrication reproducibility, and extensive characterizations.
Heterogeneous integration of gain and strongly nonlinear materials with ultra-low-loss silicon nitride (SiN) photonics offers a route to scalable quantum circuits, but concurrent wafer-scale manufacturability, low interlayer loss, and high performance have been challenging to realize. Here we demonstrate a wafer-scale III-V-on-SiN quantum photonic platform that directly integrates III-V layers to foundry-fabricated SiN circuits. The SiN layer provides 200-300 nm thick waveguides with <1 dB/m loss and a mature passive photonics ecosystem, while III-V materials provide large χ(2) and χ(3) nonlinearities for parametric gain, frequency conversion and quantum light generation. Adiabatic interlayer couplers yield <25 mdB loss to InGaP waveguides and resonators with intrinsic quality factors exceeding 106, enabling 15× brighter entanglement sources and efficient nonlinear conversion on SiN. Integrated components--including low-loss beam splitters, waveguide crossers, and tunable interferometers--are complemented by III-V lasers and InP photodetectors with amplifiers achieving up to 99−12+1% quantum efficiency and 3 GHz bandwidth. This architecture unites ultra-efficient sources, nonlinear elements and detectors on a wafer-scale, low-loss platform, establishing a path toward large-scale, low-noise quantum photonic systems.
Integrated nonlinear photonic circuits received rapid development in recent years, providing all-optical functionalities enabled by cavity-enhanced photon-photon interaction for classical and quantum applications. A high-efficiency fiber-to-chip interface is key to these integrated photonic circuits for quantum information tasks, as photon-loss is a major source that weakens quantum protocols. Here, overcoming material and fabrication limitation of thin-film aluminum nitride by adopting a stepwise waveguiding scheme, we demonstrate low-loss adiabatic fiber-optic couplers in aluminum nitride films with a substantial thickness (∼600 nm) for optimized nonlinear photon interaction. For telecom (1550 nm) and near-visible (780 nm) transverse magnetic-polarized light, the measured insertion loss of the fiber-optic coupler is -0.97 dB and -2.6 dB, respectively. Our results will facilitate the use of aluminum nitride integrated photonic circuits as efficient quantum resources for generation of entangled photons and squeezed light on microchips.
Efficient single-photon routing and switching are crucial for optical quantum computing and communication. For this purpose, all-optical switches are designed for gigahertz bandwidths. The switching mechanism is based on the optical Kerr effect via cross-phase modulation (CPM) of the single-photon signal by a strong 1550-nm pump pulse. For energy-efficient switching, this nonlinear effect is exploited in a microresonator that can either be used directly as an intensity switch in a typical add–drop configuration or as a phase shifter in a Mach–Zehnder interferometer (MZI) structure. To speed up resonance build-up and quenching, a pre-emphasis build and an off-resonance wipe pulse are used. The proposed designs are verified by traveling-wave simulations which demonstrate that 0.1 dB insertion loss and ~1 ns switching windows can be achieved. For a scalable out-of-the-lab transfer, we investigate the feasibility of the proposed switch designs for fabrication in a mature photonic integrated circuit (PIC) platform. In particular, silicon nitride PICs have demonstrated record-low losses which makes them suitable for single-photon applications. By parametric modelling of the microresonator’s directional couplers based on Lumerical EME and 2.5-dimensional varFDTD simulations, the required power transmission coefficients for both signal and pump wavelength can be achieved. This results in an all-optical switch design ready for fabrication in a commercial PIC foundry which can potentially enable scalable architectures for quantum photonic applications.
Programmable waveguide circuits are crucial building blocks for integrated spectrometric applications and quantum photonic information processing. Amongst the dielectric material platforms in integrated photonics, silicon nitride stands out with highly attractive properties such as a large bandgap energy and a moderately high index contrast. This allows low propagation losses in a wide spectral range while simultaneously allowing a dense packing of components. The aforementioned properties, together with the inherent phase stability and phase programmability achievable in silicon nitride, enable the creation of complex photonic circuits. In this thesis we describe and demonstrate densely integrated programmable photonic circuits based on silicon nitride waveguides for wavelength metrology and quantum information processing. We concentrate on reconfigurable photonic integrated circuits based on silicon nitride waveguides with low-loss propagation, to explore interference in the spectral and temporal domain for advanced applications. We investigated two types of integrated interferometric devices featuring low loss in combination with programmability for classical and quantum photonic processing. The first is simple tunable microring resonator circuits in combination with neural network data processing for the analysis of classical light in the spectral domain as wavelength meter. The second is a complex tunable network of waveguide interferometers for controlling quantum correlations (coincidences) between single photons. Exploiting the long-term interferometric stability, low propagation loss and tight optical confinement of integrated silicon nitride waveguides, we have shown complex reconfigurable optical circuits both for classical and quantum photonic processing. For future development of integrated programmable photonic processors, various challenges need to be addressed such as compact and low-power phase shifters, a further increase of the component density and lower the propagation losses.
Silicon-on-insulator (SOI) wafers have been developed for electronic integrated circuits, but are also one of the most promising platforms in photonic integrated circuits due to its low loss, high refractive index, ability to fast phase modulation, and well-developed fabrication technologies. With advantages to handle light with a small volume and high modulation speed, silicon photonics has been intensively investigated as the next generation platform of signal processing, interconnection, and communication devices. Recently, silicon photonics has been attracted great interests in quantum optics communities as optical quantum systems for linear optical quantum computing are achievable using silicon photonic components including beam splitters, phase modulators, and filters and the small footprint of a silicon photonic quantum system has unprecedented performances of high stability and scalability. Here we show our recent results on the fabrication of silicon photonic elements for quantum applications. We fabricated low-loss optical waveguides, efficient fiber-to-waveguide grating couplers, resonator-based optical filters, and tunable beam splitters and tested their performances. A micro-sized heater is attached on a Mach-Zehnder interferometer, showing stable operation as a slow phase modulator. In addition, phase modulators using plasma dispersion effects are under investigation. Finally, the quantum characteristics of photon pairs generated by spontaneous four-wave mixing in silicon waveguides are investigated. These results will be an essential cornerstone for the realization of quantum optical computing and quantum communication devices.