Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Flux-Driven Josephson Parametric Amplifier Fabricated Using the Nb/AlO x /Nb Trilayer Process

Gahyun Choi, Bokyung Kim, Jiman Choi, Kibog Park, Yonuk Chong, Yong‐Ho Lee

Published Apr 11, 2023• 2 citations
Publisher

Abstract

In this paper, we report a flux-driven Josephson parametric amplifier (JPA) fabricated using the Nb/AlOx/Nb Josephson junction process. The JPA consists of a parallel-plate type coupling capacitor and quarter-wavelength resonator terminated with a DC-SQUID. We adopt a simple process using well-established Nb trilayer technology. The overall configuration time of the Nb-based JPA can be shortened by measuring resonant frequency and its bias dependence in liquid helium. Amplification of the pre-tested device was demonstrated, showing a gain of 20 dB in a −3 dB bandwidth of 17 MHz in a 10 mK dilution fridge.

DOI
10.1109/tasc.2023.3266305

Related papers

Fabrication and characterization of all-Nb lumped-element Josephson parametric amplifiers*

Hang Xue, Zhirong Lin, Wenbing Jiang +4 more

Josephson parametric amplifiers (JPAs) with nearly quantum-limited noise performance have become indispensable devices for the measurements of superconducting quantum information. We have developed an all-Nb lumped-element flux-driven JPA operating in the three-wave mixing mode. Our Nb-based JPA comprises Nb/Al-AlO x /Nb Josephson junctions, a parallel-plate capacitor with SiO2 dielectric sandwiched between two Nb layers, a bottom coplanar waveguides layer, and a top Nb wiring layer. We experimentally demonstrate a 20 dB gain over a 190 MHz bandwidth, a mean 1 dB compression of –123 dBm, and near quantum-limited noise performance. This fabrication process can be further used to design impedance transformed parametric amplifiers for multiple-qubit readout.

Chinese Physics B•Mar 16, 2021•4 citations

Flux-driven Josephson parametric amplifier

Tsuyoshi Yamamoto, K. Inomata, Watanabe, M. +5 more

We have developed a Josephson parametric amplifier, comprising a superconducting coplanar waveguide resonator terminated by a dc SQUID (superconducting quantum interference device). An external field (the pump, $\sim 20$ GHz) modulates the flux threading the dc SQUID, and, thereby, the resonant frequency of the cavity field (the signal, $\sim 10$ GHz), which leads to parametric signal amplification. We operated the amplifier at different band centers, and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.

arXiv:0808.1386•Aug 10, 2008•25 citations

Flux-driven Josephson parametric amplifier

Tsuyoshi Yamamoto, K. Inomata, 道生 渡部 +5 more

We have developed a Josephson parametric amplifier comprising a superconducting coplanar-waveguide resonator terminated by a dc superconducting quantum interference device (SQUID). An external field (the pump, ∼20 GHz) modulates the flux threading of the dc SQUID and, therefore, the resonant frequency of the cavity field (the signal, ∼10 GHz), which leads to the parametric signal amplification. We operated the amplifier at different band centers and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.

Applied Physics Letters•Jul 28, 2008•469 citations

Nb-based Josephson parametric amplifier for superconducting qubit measurement*

Feifan Su, Ziting Wang, Huikai Xu +5 more

We report a fabrication process and characterization of the Josephson parametric amplifier (JPA) for the single-shot quantum state measurement of superconducting multiqubit system. The device is prepared using Nb film as its base layer, which is convenient in the sample patterning process like e-beam lithography and film etching. Our results show that the JPA has a bandwidth up to 600 MHz with gain above 15 dB and noise temperature approaching the quantum limit. The qubit state differentiation measurements demonstrate the signal-to-noise ratio around 3 and the readout fidelity above 97% and 91% for the ground and first-excited states, respectively.

Chinese Physics B•Sep 18, 2019•10 citations

Design, fabrication, and modeling of Nb-based Josephson traveling wave parametric amplifiers toward quantum-limited readout

A. Mauro, G. Carapella, Guerino Avallone +8 more

This work presents the design, fabrication strategy, and numerical modeling of niobium-based Josephson traveling-wave parametric amplifiers (JTWPAs) for quantum microwave readout. These devices are designed as nonlinear transmission lines composed of more than two thousand Josephson junction unit cells, with periodically embedded resonators enabling phase matching. The use of Nb trilayer technology (Nb/AlO[Formula: see text]/Nb) with respect to Al-based devices ensures higher junction uniformity, lower losses, and higher resilience to stray magnetic fields. We developed a multi-scale modeling framework combining harmonic balance methods and time-domain simulations of nonlinear coupled differential equations to describe wave propagation, parametric amplification, and spectral dynamics. Numerical results predict broadband gain up to 20[Formula: see text]dB over multi-GHz bandwidths. These results demonstrate the potential of Nb-based JTWPAs as scalable components for quantum applications.

International Journal of Geometric Methods in Modern Physics•Jul 31, 2026•0 citations

A three-dimensional Josephson parametric amplifier

Imran Mahboob, Hiraku Toida, Kosuke Kakuyanagi +2 more

Abstract A Josephson parametric amplifier (JPA) is executed in a three-dimensional (3D) microwave cavity by coupling it to a superconducting quantum interference device (SQUID) that is embedded in a two-dimensional resonator. The JPA is activated in a three-wave mixing configuration by injecting ac magnetic flux, at twice the 3D cavity frequency, into the SQUID. An 8.3 GHz cavity is measured in a non-degenerate phase-insensitive configuration which yields gains in excess of 40 dB, where a 20 dB gain results in an operational bandwidth of 0.4 MHz, a 1 dB compression point of −115 dBm with half a quantum of added noise.

arXiv:2205.13101•Applied Physics Express•May 16, 2022•9 citations
In this paper, we report a flux-driven Josephson parametric amplifier (JPA) fabricated using the Nb/AlOx/Nb Josephson junction process. The JPA consists of a parallel-plate type coupling capacitor and quarter-wavelength resonator terminated with a DC-SQUID. We adopt a simple process using well-established Nb trilayer technology. The overall configuration time of the Nb-based JPA can be shortened by measuring resonant frequency and its bias dependence in liquid helium. Amplification of the pre-tested device was demonstrated, showing a gain of 20 dB in a −3 dB bandwidth of 17 MHz in a 10 mK dilution fridge.
Josephson parametric amplifiers (JPAs) with nearly quantum-limited noise performance have become indispensable devices for the measurements of superconducting quantum information. We have developed an all-Nb lumped-element flux-driven JPA operating in the three-wave mixing mode. Our Nb-based JPA comprises Nb/Al-AlO x /Nb Josephson junctions, a parallel-plate capacitor with SiO2 dielectric sandwiched between two Nb layers, a bottom coplanar waveguides layer, and a top Nb wiring layer. We experimentally demonstrate a 20 dB gain over a 190 MHz bandwidth, a mean 1 dB compression of –123 dBm, and near quantum-limited noise performance. This fabrication process can be further used to design impedance transformed parametric amplifiers for multiple-qubit readout.
We have developed a Josephson parametric amplifier, comprising a superconducting coplanar waveguide resonator terminated by a dc SQUID (superconducting quantum interference device). An external field (the pump, ∼20\sim 20∼20 GHz) modulates the flux threading the dc SQUID, and, thereby, the resonant frequency of the cavity field (the signal, ∼10\sim 10∼10 GHz), which leads to parametric signal amplification. We operated the amplifier at different band centers, and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.
We have developed a Josephson parametric amplifier comprising a superconducting coplanar-waveguide resonator terminated by a dc superconducting quantum interference device (SQUID). An external field (the pump, ∼20 GHz) modulates the flux threading of the dc SQUID and, therefore, the resonant frequency of the cavity field (the signal, ∼10 GHz), which leads to the parametric signal amplification. We operated the amplifier at different band centers and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.
We report a fabrication process and characterization of the Josephson parametric amplifier (JPA) for the single-shot quantum state measurement of superconducting multiqubit system. The device is prepared using Nb film as its base layer, which is convenient in the sample patterning process like e-beam lithography and film etching. Our results show that the JPA has a bandwidth up to 600 MHz with gain above 15 dB and noise temperature approaching the quantum limit. The qubit state differentiation measurements demonstrate the signal-to-noise ratio around 3 and the readout fidelity above 97% and 91% for the ground and first-excited states, respectively.
This work presents the design, fabrication strategy, and numerical modeling of niobium-based Josephson traveling-wave parametric amplifiers (JTWPAs) for quantum microwave readout. These devices are designed as nonlinear transmission lines composed of more than two thousand Josephson junction unit cells, with periodically embedded resonators enabling phase matching. The use of Nb trilayer technology (Nb/AlO[Formula: see text]/Nb) with respect to Al-based devices ensures higher junction uniformity, lower losses, and higher resilience to stray magnetic fields. We developed a multi-scale modeling framework combining harmonic balance methods and time-domain simulations of nonlinear coupled differential equations to describe wave propagation, parametric amplification, and spectral dynamics. Numerical results predict broadband gain up to 20[Formula: see text]dB over multi-GHz bandwidths. These results demonstrate the potential of Nb-based JTWPAs as scalable components for quantum applications.
Abstract A Josephson parametric amplifier (JPA) is executed in a three-dimensional (3D) microwave cavity by coupling it to a superconducting quantum interference device (SQUID) that is embedded in a two-dimensional resonator. The JPA is activated in a three-wave mixing configuration by injecting ac magnetic flux, at twice the 3D cavity frequency, into the SQUID. An 8.3 GHz cavity is measured in a non-degenerate phase-insensitive configuration which yields gains in excess of 40 dB, where a 20 dB gain results in an operational bandwidth of 0.4 MHz, a 1 dB compression point of −115 dBm with half a quantum of added noise.