We propose and demonstrate chip-scale based all-optical remote magnetic sensing. Specifically, we remotely interrogate mm-scale micromachined vapor cells and measure the ambient magnetic field with at a standoff distance of ~10 meters and a sensitivity of ~1 pT/√Hz. Simultaneously we are able to measure the distance between the micro-cell and the interrogating system by means of time-of-flight measurements, thus correlating between position and magnetic field. Consequently, we provide a novel toolset to remotely map arbitrary, remote and hard to access magnetic field in an unshielded environment with high sensitivity and spatial resolution.
We propose and demonstrate chip-scale based all-optical remote magnetic sensing. Specifically, we remotely interrogate mm-scale micromachined vapor cells and measure the ambient magnetic field with at a standoff distance of ~10 meters and a sensitivity of ~1 pT/√Hz. Simultaneously we are able to measure the distance between the micro-cell and the interrogating system by means of time-of-flight measurements, thus correlating between position and magnetic field. Consequently, we provide a novel toolset to remotely map arbitrary, remote and hard to access magnetic field in an unshielded environment with high sensitivity and spatial resolution.
Quantum sensing is an ever-evolving research field describing the use of a quantum phenomenon to perform measurement of a physical quantity. Amongst different types of quantum sensors, atomic vapor-based quantum effects are extensively used to measure quantities such as time, velocity, acceleration, electric, and magnetic fields. Here, we propose and demonstrate remote quantum sensing using a chip-scale atomic vapor cell. Specifically, we remotely interrogate millimeter-scale micromachined vapor cells, and measure the ambient Earth’s magnetic field at a standoff distance of ∼10 m and a sensitivity of ∼1 pT/√Hz. We further spatially map different magnetic fields in the presence of a noisy ambient environment. Simultaneously we are able measure the distance between a micro-cell and the interrogating system by means of time-of-flight measurements, thus correlating between position and magnetic field. Utilizing micromachined vapor cells for remote magnetometry offers substantial advantages in scalability, planar photonic integration, cost, and size. Consequently, we provide a novel toolset to deploy, measure, and map arbitrary, remote, and hard-to-access magnetic fields in unshielded environments with high sensitivity and spatial resolution, paving the way to a variety of novel applications in diverse fields such as medicine, communication, defense, space-exploration, and quantum technologies.
Atomic magnetometry was performed at Earth’s magnetic field over a free-space distance of ten meters. Two laser beams aimed at a distant alkali-vapor cell excited and detected the 87Rb magnetic resonance, allowing the magnetic field within the cell to be interrogated remotely. Operated as a driven oscillator, the magnetometer measured the geomagnetic field with ≲3.5 pT precision in a ∼2 s data acquisition; this precision was likely limited by ambient field fluctuations. The sensor was also operated in self-oscillating mode with a 5.3 pT/Hz noise floor. Further optimization will yield a high-bandwidth, fully remote magnetometer with sub-pT sensitivity.
This paper reports the development and characterization of an atomic magnetometer with a microfabricatedRb atomic vapour cell as the sensing element. The measurement principle is based on the Faraday rotation of linearly polarized probe light, which interacts resonantly with atomic spin states in the presence of a magnetic field. In the chip-scale vapour cell (dimensions: 8.0 mm × 12.0 mm × 1.5 mm), the atomic vapour is confined to a micromachined optical cavity of 3.5 µL with an optical path length of 0.5 mm. Optical interrogation is performed using a single laser beam tuned to the D1 absorption resonance of ⁸⁵Rb. The rotation arises due to magnetically induced circular birefringence in the hot atomic vapour. A bench model of the magnetometer is demonstrated over a measurement range of ±50 µT with a maximum uncertainty of 800 nT in an unshielded environment. The magneto-optic rotation (MOR) response in the laboratory was investigated and is observed to vary from 5×10³ rad/T for near zero magnetic field to 3.2×10³ rad/T for ambient geomagnetic field.
We demonstrate an optical magnetometer based on a microfabricated 87Rb vapor cell in a micromachined silicon sensor head. The alkali atom density in the vapor cell is increased by heating the cell with light brought to the sensor through an optical fiber, and absorbed by colored filters attached to the cell windows. A second fiber-optically coupled beam optically pumps and interrogates the atoms. The magnetometer operates on 140 mW of heating power and achieves a sensitivity below 20 fT/√Hz throughout most of the frequency band from 15 Hz to 100 Hz. Such a sensor can measure magnetic fields from the human heart and brain.
Sensitive magnetometers have been applied in a wide range of research fields, including geophysical exploration, bio-magnetic field detection, ultralow-field nuclear magnetic resonance, etc. Commonly, magnetometers are directly placed at the position where the magnetic field is to be measured. However, in some situations, for example in near space or harsh environments, near nuclear reactors or particle accelerators, it is hard to place a magnetometer directly there. If the magnetic field can be detected remotely, i.e., via stand-off detection, this problem can be solved. As optical magnetometers are based on optical readout, they are naturally promising for stand-off detection. We review various approaches to optical stand-off magnetometry proposed and developed over the years, culminating in recent results on measuring magnetic fields in the mesosphere using laser guide stars, magnetometry with mirrorless-lasing readout, and proposals for satellite-assisted interrogation of atmospheric sodium.
The ability to measure tiny magnetic fields with good sensitivity can be found in many applications, from biological imaging to prospecting for buried treasure. However, the most sensitive magnetometers that operate in ambient conditions tend to be power-hungry, bulky, and heavy. Shrinking the size to just several millimeters and the power consumption to hundreds of milliwatts, Schwindt et al. have fabricated a sensitive magnetometer using microelectromechanical technology. A cloud of rubidium atoms trapped in a micromachined vapor cell is used to sense the magnetic field. The magnetic field splits the energy levels of rubidium atoms, and the extent of the splitting depends on the strength of the magnetic field. Changes in the magnetic field are then detected and tracked optically by the relative absorption changes of a laser light tuned to the split energy levels. It could be that in the not-too-distant future we could be using handheld battery-operated magnetometers. — ISO