© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

International Conference on Photonics in Switching

Phase-Insensitive, Ultrafast All-Optical Switch Based on Parametric Down-Conversion

Andrey E. Kobyakov, Vladimir Pavlovich Torchigin, Eduard Schmidt, F. Lederer

Published Jan 1, 1997• 0 citations

Abstract

In a search for all-optical signal processing elements operating at a picosecond time scale nonlinear phenomena in quadratic media, extensively studied since many years in a different context were revisited lately. However, all devices proposed and implemented to date (see [1,2] and Refs, therein) have certain drawbacks complicating their use as all-optical amplifying/switching devices, viz., low amplification because of a strong control signal in intensity-controlled devices, smooth switching characteristics of Mach-Zehnder interferometers, and a requirement of fast phase control in phase-sensitive devices [3]. A key requirement of all devices proposed until now is the coherence of pump and signal beams because the χ(2)-process strongly depends on the relative phase. Here we demonstrate that this phase-insensitive amplification/switching can be achieved by a three wave interaction even with reduced pump power requirements. In what follows we focus on the so-called vectorial or type II SHG where two orthogonally polarized fundamental frequency (FF) components A1 and A2 interact with the only second harmonic (SH) wave B polarized parallel to one of the fundamentals [2].

DOI: 10.1364/ps.1997.pthc3

Related papers

Experimental processing of light pulses with quadratic nonlinearity in type II phase-matched conditions: switching, phase modulation, phase conjugation, transistor operation

L. Lefort, Alain Barthélémy

The scope of this paper is to revisit the use of quadratic crystals cut for second harmonic generation (SHG) with type II phase-matching in view of all-optical processing of light signal. The investigations on this topic mainly focused in the past years on the possibilities opened by cascading of quadratic nonlinearities in phase-mismatched conditions [1]. The goal of this paper is to remind the reader that various types of optical processing are achievable with sum and difference frequency generation in phase-matched position without the requirement for cascaded nonlinearities. In a first part we will report few examples of the use of difference frequency generation (or down conversion) for signal processing. In a second part we will show that type II SHG with unbalanced fundamental inputs may lead to coherent amplification or transistor like operation.

Nonlinear Guided Waves and Their Applications•Jan 1, 1998•0 citations

Phase-Insensitive, Single Wavelength, All-Optical Transistor Based on Cascaded Second-Order Nonlinearities

Z. Wang, David J. Hagan, Sunggeon Kim +2 more

The resurgence of interest in cascaded second order nonlinearities[1,2] has resulted in several schemes for applying cascading in second-harmonic generating (SHG) crystals to optical transistor-like devices [3-7], Such devices allow a weak signal beam to impose a large amplitude modulation on a strong “pump” beam, through mixing in a χ(2) crystal. However, all of the devices reported to date require the pump and signal beams to be temporally coherent, as the process is strongly dependent on the phase between these two beams. There have been some suggestions[6,7] that type II phasematched SHG may remove phase sensitivity, but the devices proposed still require that the signal must be in phase with approximately half of the pump intensity. In this letter, we describe how one may properly exploit type II phase matching to produce a truly phase-insensitive all-optical transistor (AOT) based on second order nonlinearities.

Nonlinear Optics•Jan 1, 1996•1 citation

Phase-insensitive all-optical transistors based on second-order nonlinearities

Sungwon Kim, Zuo Wang, David J. Hagan +4 more

We demonstrate and compare two phase-insensitive all-optical transistors (AOT's) based on frequency-degenerate quadratic three-wave interactions. In particular, we demonstrate gain using KTP in a type II geometry. Both AOT's exploit the phase insensitivity inherent to three-wave parametric processes when only two fields are input, providing amplification of a small signal at the operating frequency via the interaction with a second-harmonic wave. The first scheme is based on successive up- and down-conversion (i.e., cascading) while the second relies on parametric down-conversion. We obtain gains of 5 and 160 in the two configurations, respectively, with a significant background and output coherent to the pump in the first case, no background and coherence between output and signal in the second.

IEEE Journal of Quantum Electronics•Apr 1, 1998•18 citations

Fiber-based phase-sensitive optical amplifiers and their applications

Peter A. Andrekson, Magnus Karlsson

Optical parametric amplifiers rely on second-order susceptibility (three-wave mixing) or third-order susceptibility (four-wave mixing) in a nonlinear process where the energy of incoming photons is not changed (elastic scattering). In the latter case, two pump photons are converted to a signal and to an idler photon. Under certain conditions, related to the phase evolution of the waves involved, this conversion can be very efficient, resulting in large amplification of an input signal. As the nonlinear process can be very fast, all-optical applications aside from pure amplification are also possible. If the amplifier is implemented in an optical input-phase-sensitive manner, it is possible to amplify a signal wave without excess noise, i.e., with a noise figure of 0 dB. In this paper, we will provide the fundamental concepts and theory of such amplifiers, with a focus on their implementation in highly nonlinear optical fibers relying on four-wave mixing. We will discuss the distinctions between phase-insensitive and phase-sensitive operation and include several experimental results to illustrate their capability. Different applications of parametric amplifiers are also discussed, including their use in optical communication links.

Advances in Optics and Photonics•Feb 20, 2020•102 citations

All-optical processing by means of vectorial interactions in second-order cascading: novel approaches

Gaetano Assanto, S. Trillo, Irina Torelli

Based on the tensorial nature of second-order nonlinear susceptibilities, we show how two orthogonal field components at frequency omega can interact by means of the generated second harmonic, with a resulting coherent control of one onto the other. All-optical transistor operation and polarization switching are among the signal functions that can be implemented in properly oriented crystals.

Optics Letters•Nov 1, 1994•49 citations

All-optical switching and sampling based on a parametric device with type II phase-matching

L. Lefort, Alain Barthélémy

We report a new arrangement for all-optical switching that is very simple to implement. It is based on a degenerate parametric amplifier working at low gain level (G=3 to 5 dB) that preserves an on/off ratio close to 40 to 50 dB. It relies on the characteristic features of type II phase-matching in the case of parametric amplification at degeneracy, where a single pump photon breaks into two photons of half energy with crossed linear polarizations. The device has been designed to allow the ultrafast switching of weak light.

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Nov 19, 2002•1 citation

In a search for all-optical signal processing elements operating at a picosecond time scale nonlinear phenomena in quadratic media, extensively studied since many years in a different context were revisited lately. However, all devices proposed and implemented to date (see [1,2] and Refs, therein) have certain drawbacks complicating their use as all-optical amplifying/switching devices, viz., low amplification because of a strong control signal in intensity-controlled devices, smooth switching characteristics of Mach-Zehnder interferometers, and a requirement of fast phase control in phase-sensitive devices [3]. A key requirement of all devices proposed until now is the coherence of pump and signal beams because the χ(2)-process strongly depends on the relative phase. Here we demonstrate that this phase-insensitive amplification/switching can be achieved by a three wave interaction even with reduced pump power requirements. In what follows we focus on the so-called vectorial or type II SHG where two orthogonally polarized fundamental frequency (FF) components A1 and A2 interact with the only second harmonic (SH) wave B polarized parallel to one of the fundamentals [2].

The scope of this paper is to revisit the use of quadratic crystals cut for second harmonic generation (SHG) with type II phase-matching in view of all-optical processing of light signal. The investigations on this topic mainly focused in the past years on the possibilities opened by cascading of quadratic nonlinearities in phase-mismatched conditions [1]. The goal of this paper is to remind the reader that various types of optical processing are achievable with sum and difference frequency generation in phase-matched position without the requirement for cascaded nonlinearities. In a first part we will report few examples of the use of difference frequency generation (or down conversion) for signal processing. In a second part we will show that type II SHG with unbalanced fundamental inputs may lead to coherent amplification or transistor like operation.

The resurgence of interest in cascaded second order nonlinearities[1,2] has resulted in several schemes for applying cascading in second-harmonic generating (SHG) crystals to optical transistor-like devices [3-7], Such devices allow a weak signal beam to impose a large amplitude modulation on a strong “pump” beam, through mixing in a χ(2) crystal. However, all of the devices reported to date require the pump and signal beams to be temporally coherent, as the process is strongly dependent on the phase between these two beams. There have been some suggestions[6,7] that type II phasematched SHG may remove phase sensitivity, but the devices proposed still require that the signal must be in phase with approximately half of the pump intensity. In this letter, we describe how one may properly exploit type II phase matching to produce a truly phase-insensitive all-optical transistor (AOT) based on second order nonlinearities.

We demonstrate and compare two phase-insensitive all-optical transistors (AOT's) based on frequency-degenerate quadratic three-wave interactions. In particular, we demonstrate gain using KTP in a type II geometry. Both AOT's exploit the phase insensitivity inherent to three-wave parametric processes when only two fields are input, providing amplification of a small signal at the operating frequency via the interaction with a second-harmonic wave. The first scheme is based on successive up- and down-conversion (i.e., cascading) while the second relies on parametric down-conversion. We obtain gains of 5 and 160 in the two configurations, respectively, with a significant background and output coherent to the pump in the first case, no background and coherence between output and signal in the second.

Optical parametric amplifiers rely on second-order susceptibility (three-wave mixing) or third-order susceptibility (four-wave mixing) in a nonlinear process where the energy of incoming photons is not changed (elastic scattering). In the latter case, two pump photons are converted to a signal and to an idler photon. Under certain conditions, related to the phase evolution of the waves involved, this conversion can be very efficient, resulting in large amplification of an input signal. As the nonlinear process can be very fast, all-optical applications aside from pure amplification are also possible. If the amplifier is implemented in an optical input-phase-sensitive manner, it is possible to amplify a signal wave without excess noise, i.e., with a noise figure of 0 dB. In this paper, we will provide the fundamental concepts and theory of such amplifiers, with a focus on their implementation in highly nonlinear optical fibers relying on four-wave mixing. We will discuss the distinctions between phase-insensitive and phase-sensitive operation and include several experimental results to illustrate their capability. Different applications of parametric amplifiers are also discussed, including their use in optical communication links.

We report a new arrangement for all-optical switching that is very simple to implement. It is based on a degenerate parametric amplifier working at low gain level (G=3 to 5 dB) that preserves an on/off ratio close to 40 to 50 dB. It relies on the characteristic features of type II phase-matching in the case of parametric amplification at degeneracy, where a single pump photon breaks into two photons of half energy with crossed linear polarizations. The device has been designed to allow the ultrafast switching of weak light.