Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Symmetry

Controlling I-V Hysteresis in Al/Pt Bilayer Symmetric SQUIDs at Millikelvin Temperatures

Dmitry S. Yakovlev, Ivan A. Nazhestkin, Nidzhat G. Ismailov, Sergey V. Egorov, Vladimir N Antonov, Vladimir L. Gurtovoi

Published Feb 18, 2023• 8 citations
Publisher

Abstract

We study operation of a superconducting quantum interference devices (SQUIDs) based on a new bilayer material. They can be used for the ultra-sensitive detection of magnetic momentum at temperatures down to milliKelvin range. Typically, thermal origin hysteresis of the symmetric SQUID current-voltage curves limits operating temperatures to T>0.6Tc. We used a new bilayer material for SQUID fabrication, namely proximity-coupled superconductor/normal-metal (S/N) bilayers (aluminum 25 nm/platinum 5 nm). Because of the 5 nm Pt-layer, Al/Pt devices show nonhysteretic behavior in a broad temperature range from 20 mK to 0.8 K. Furthermore, the Al/Pt bilayer devices demonstrate an order of magnitude lower critical current compared to the Al devices, which decreases the screening parameter (βL) and improves the modulation depth of the critical current by magnetic flux. Operation at lower temperatures reduces thermal noise and increases the SQUID magnetic field resolution. Moreover, we expect strong decrease of two-level fluctuators on the surface of aluminum due to Pt-layer oxidation protection and hence significant reduction of the 1/f noise. Optimized geometry of Al/Pt symmetric SQUIDs is promising for the detection of single-electron spin flip.

DOI
10.3390/sym15020550

Related papers

Proximity effect bilayer nano superconducting quantum interference devices for millikelvin magnetometry

A. Blois, S. Rozhko, L. Hao +2 more

Superconducting quantum interference devices (SQUIDs) incorporating thin film nanobridges as weak links have sensitivities approaching that required for single spin detection at 4.2 K. However, due to thermal hysteresis they are difficult to operate at much lower temperatures which hinder their application to many quantum measurements. To overcome this, we have developed nanoscale SQUIDs made from titanium-gold proximity bilayers. We show that their electrical properties are consistent with a theoretical model developed for heat flow in bilayers and demonstrate that they enable magnetic measurements to be made on a sample at system temperatures down to 60 mK.

Journal of Applied Physics•Dec 18, 2013•22 citations

NanoSQUIDs for millikelvin magnetometry

A. Blois

Nanoscale Superconducting QUantum Interference Devices (SQUIDs) have spin sensitivities approaching that required to detect the flip of a single spin in close proximity. There is considerable interest in developing them for measuring the properties of small spin populations in magnetic systems. It is desirable that such measurements can be realised at sub-kelvin temperatures thereby allowing the study of magnetic systems that undergo phase changes at such temperatures. However, most nanoscale SQUIDs use nanobridges as the Josephson elements which limits the operating range to temperatures close to the transition temperature of the device. Well below this, the current-phase relation can become non-sinusoidal, and hot spots arising from the large critical current lead to hysteretic I-V characteristics. To extend the temperature range downwards, we have developed a range of nanoSQUIDs fabricated from alternative materials with lower transition temperatures including Ti/Au and Al/Ag bilayers patterned using lift-off and e-beam lithography (EBL). We report on their I-V characteristics, noise performance and behaviour in applied magnetic fields at temperatures down to 60 mK. We discuss theoretical analysis and computer modelling of the heat flow in the nanobridge structure, and consider the effects of bank geometry and kinetic inductance on the overall device performance. Finally, we present measurements of several magnetic systems: control lines, superconducting islands and ground planes and discuss the feasibility of magnetic measurements of novel materials of interest, including the heterointerface between lanthanium aluminate and strontium titanate.

•Apr 28, 2014•0 citations

High-T$_\text{c}$ SQUID Optimization: Exploring Competing Design and Operating Parameters

M. A. Galí Labarias, Oscar A. Nieves, Shane Keenan +1 more

Improving the design of superconducting quantum interference devices (SQUIDs) for quantum sensing applications can involve a compromise between competing device parameters. For SQUIDs made from high-temperature superconductors (HTS), accurate modelling for optimization should include the device geometry, material properties and their temperature dependences, as well as thermal noise. We outline here a lumped element model that calculates the voltage response to magnetic flux of a hairpin SQUID and use it to explore the effect of these parameters on optimizing the SQUID voltage output. We first validate our model by showing close agreement with current-voltage and voltage-flux measurements performed on Yttrium Barium Copper Oxide hairpin SQUIDs with different geometries by including structures such as the bias leads. We show the effect of track width on the kinetic to geometric inductance ratios ($\kappa$) for a range of film thicknesses and temperatures, to aid researchers how to optimize SQUID designs. Then, through numerical simulations, we show on how (i) the voltage modulation depth decreases exponentially with the total inductance, independent of the asymmetry ratio; (ii) narrower superconducting tracks lead to a broader temperature operation range,$\Delta T \sim 30$K, while wider tracks operate in a narrower temperature range,$\Delta T \sim 10$K, but are more sensitive to temperature changes; and (iv) the optimal bias current, which maximises the device performance, depends on the operating temperature.

IEEE Transactions on Applied Superconductivity•May 2, 2024•2 citations

Nano-superconducting quantum interference devices with continuous read out at milliKelvin temperatures

Dibyendu Hazra, John R. Kirtley, K. Hasselbach

We describe aluminum-niobium-tungsten trilayer Nano-Superconducting Quantum Interference Devices (NanoSQUIDs) that can be read out continuously down, in temperature, to at least 230 mK. They show voltage oscillations up to at least 20 mT in field. A voltage modulation of 500 μV, voltage sensitivity of 2 mV/Φ0, and white noise floor better than 5×10−5 Φ0/Hz have been obtained. Flux noise places them between conventional low impedance SQUIDs and standard nanoSQUIDs. High sensitivity and ease of implementation make this new kind of nanoSQUID attractive for magnetic detection schemes on the nanoscale and low temperature scanning SQUID microscopy.

Applied Physics Letters•Aug 26, 2013•24 citations

Applications of superconducting electronics to quantum optics and quantum metrology

Ling Yun Hao

SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.

Advances in Automobile Engineering•Jan 1, 2021•0 citations

Nano-superconducting quantum interference devices with suspended junctions

Dibyendu Hazra, John R. Kirtley, K. Hasselbach

Nano-Superconducting Quantum Interference Devices (nano-SQUIDs) are usually fabricated from a single layer of either Nb or Al. We describe here a simple method for fabricating suspended nano-bridges in Nb/Al thin-film bilayers. We use these suspended bridges, which act as Josephson weak links, to fabricate nano-SQUIDs which show critical current oscillations at temperatures up to 1.5 K and magnetic flux densities up to over 20 mT. These nano-SQUIDs exhibit flux modulation depths intermediate between all-Al and all-Nb devices, with some of the desirable characteristics of both. The suspended geometry is attractive for magnetic single nanoparticle measurements.

Applied Physics Letters•Apr 14, 2014•25 citations
We study operation of a superconducting quantum interference devices (SQUIDs) based on a new bilayer material. They can be used for the ultra-sensitive detection of magnetic momentum at temperatures down to milliKelvin range. Typically, thermal origin hysteresis of the symmetric SQUID current-voltage curves limits operating temperatures to T>0.6Tc. We used a new bilayer material for SQUID fabrication, namely proximity-coupled superconductor/normal-metal (S/N) bilayers (aluminum 25 nm/platinum 5 nm). Because of the 5 nm Pt-layer, Al/Pt devices show nonhysteretic behavior in a broad temperature range from 20 mK to 0.8 K. Furthermore, the Al/Pt bilayer devices demonstrate an order of magnitude lower critical current compared to the Al devices, which decreases the screening parameter (βL) and improves the modulation depth of the critical current by magnetic flux. Operation at lower temperatures reduces thermal noise and increases the SQUID magnetic field resolution. Moreover, we expect strong decrease of two-level fluctuators on the surface of aluminum due to Pt-layer oxidation protection and hence significant reduction of the 1/f noise. Optimized geometry of Al/Pt symmetric SQUIDs is promising for the detection of single-electron spin flip.
Superconducting quantum interference devices (SQUIDs) incorporating thin film nanobridges as weak links have sensitivities approaching that required for single spin detection at 4.2 K. However, due to thermal hysteresis they are difficult to operate at much lower temperatures which hinder their application to many quantum measurements. To overcome this, we have developed nanoscale SQUIDs made from titanium-gold proximity bilayers. We show that their electrical properties are consistent with a theoretical model developed for heat flow in bilayers and demonstrate that they enable magnetic measurements to be made on a sample at system temperatures down to 60 mK.
Nanoscale Superconducting QUantum Interference Devices (SQUIDs) have spin sensitivities approaching that required to detect the flip of a single spin in close proximity. There is considerable interest in developing them for measuring the properties of small spin populations in magnetic systems. It is desirable that such measurements can be realised at sub-kelvin temperatures thereby allowing the study of magnetic systems that undergo phase changes at such temperatures. However, most nanoscale SQUIDs use nanobridges as the Josephson elements which limits the operating range to temperatures close to the transition temperature of the device. Well below this, the current-phase relation can become non-sinusoidal, and hot spots arising from the large critical current lead to hysteretic I-V characteristics. To extend the temperature range downwards, we have developed a range of nanoSQUIDs fabricated from alternative materials with lower transition temperatures including Ti/Au and Al/Ag bilayers patterned using lift-off and e-beam lithography (EBL). We report on their I-V characteristics, noise performance and behaviour in applied magnetic fields at temperatures down to 60 mK. We discuss theoretical analysis and computer modelling of the heat flow in the nanobridge structure, and consider the effects of bank geometry and kinetic inductance on the overall device performance. Finally, we present measurements of several magnetic systems: control lines, superconducting islands and ground planes and discuss the feasibility of magnetic measurements of novel materials of interest, including the heterointerface between lanthanium aluminate and strontium titanate.
High-Tc_\text{c}c​ SQUID Optimization: Exploring Competing Design and Operating Parameters
Improving the design of superconducting quantum interference devices (SQUIDs) for quantum sensing applications can involve a compromise between competing device parameters. For SQUIDs made from high-temperature superconductors (HTS), accurate modelling for optimization should include the device geometry, material properties and their temperature dependences, as well as thermal noise. We outline here a lumped element model that calculates the voltage response to magnetic flux of a hairpin SQUID and use it to explore the effect of these parameters on optimizing the SQUID voltage output. We first validate our model by showing close agreement with current-voltage and voltage-flux measurements performed on Yttrium Barium Copper Oxide hairpin SQUIDs with different geometries by including structures such as the bias leads. We show the effect of track width on the kinetic to geometric inductance ratios (κ\kappaκ) for a range of film thicknesses and temperatures, to aid researchers how to optimize SQUID designs. Then, through numerical simulations, we show on how (i) the voltage modulation depth decreases exponentially with the total inductance, independent of the asymmetry ratio; (ii) narrower superconducting tracks lead to a broader temperature operation range,ΔT∼30\Delta T \sim 30ΔT∼30K, while wider tracks operate in a narrower temperature range,ΔT∼10\Delta T \sim 10ΔT∼10K, but are more sensitive to temperature changes; and (iv) the optimal bias current, which maximises the device performance, depends on the operating temperature.
We describe aluminum-niobium-tungsten trilayer Nano-Superconducting Quantum Interference Devices (NanoSQUIDs) that can be read out continuously down, in temperature, to at least 230 mK. They show voltage oscillations up to at least 20 mT in field. A voltage modulation of 500 μV, voltage sensitivity of 2 mV/Φ0, and white noise floor better than 5×10−5 Φ0/Hz have been obtained. Flux noise places them between conventional low impedance SQUIDs and standard nanoSQUIDs. High sensitivity and ease of implementation make this new kind of nanoSQUID attractive for magnetic detection schemes on the nanoscale and low temperature scanning SQUID microscopy.
SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.
Nano-Superconducting Quantum Interference Devices (nano-SQUIDs) are usually fabricated from a single layer of either Nb or Al. We describe here a simple method for fabricating suspended nano-bridges in Nb/Al thin-film bilayers. We use these suspended bridges, which act as Josephson weak links, to fabricate nano-SQUIDs which show critical current oscillations at temperatures up to 1.5 K and magnetic flux densities up to over 20 mT. These nano-SQUIDs exhibit flux modulation depths intermediate between all-Al and all-Nb devices, with some of the desirable characteristics of both. The suspended geometry is attractive for magnetic single nanoparticle measurements.