Physics of the Solid State

Influence of transmission line parameters on the degree of matching of the generator with the SIS-mixer in the frequency range 200-700 GHz

A. A. Atepalikhin, Fedor V. Khan, Lyudmila V. Filippenko, V. P. Koshelets

Published Jan 1, 2022• 1 citation

Abstract

This work is aimed at the development, research and optimization of superconducting integrated circuits designed to match the impedances of a long Josephson junction generator, the so-called flux generator (FFO) and a superconductor--insulator--superconductor (SIS) detector in the sub-terahertz frequency range. Numerical calculations of integrated circuits designed to optimize the parameters of transmission lines are presented. The main parameters of the lines and their influence on signal propagation are determined. The results of optimization of integrated matching circuits in the range of 450-700 GHz are demonstrated. Keywords: integrated matching circuits, Josephson junctions, sub-terahertz generator.

DOI: 10.21883/pss.2022.10.54219.41hh

Related papers

Superconducting Matching Circuits for an Oscillator and an SIS Mixer in the Subterahertz Frequency Range

A. A. Atepalikhin, Fedor V. Khan, Lyudmila V. Filippenko +1 more

Abstract At present, microwave transmission lines are characterized by a strong frequency dependence of loss in the subterahertz range. This work is aimed at development, research, and optimization of superconducting integrated circuits designed for matching the impedances of a long Josephson junction oscillator (a so-called “flux-flow oscillator”) and a superconductor–insulator–superconductor (SIS) detector in the subterahertz frequency range. The goal of this study is to improve and approve the numerical calculation methods, which make it possible to describe correctly experimental superconducting structures in a wide frequency range. Numerical calculations of integrated circuits have been performed in order to optimize the topology and parameters of transmission lines. The main parameters of the transmission lines and their influence on the signal propagation are determined. The results of optimization of integrated matching circuits in the range of 450–700 GHz have been experimentally confirmed. Optimization and improvement of transmission lines allow one to design new-generation integrated superconducting detectors and investigate tunnel SIS junctions more thoroughly (including shunted ones) and the properties of heterodyne oscillators based on long Josephson junctions.

Technical Physics LettersJan 1, 20240 citations

Shunted Josephson Junctions and Optimization of Niobium Integrated Matching Circuits

M. S. Shevchenko, Artemiy A. Atepalikhin, Fedor V. Khan +3 more

Josephson junctions (JJs) with non-hysteretic I-V characteristic and high critical parameters are required for many applications; in particular, they are needed to create tunable THz range oscillators. We fabricated and studied shunted superconductor-insulator-superconductor (SIS) Nb-AlOx-Nb tunnel junctions with an area of about 1μm2, estimated their parameters, and compared them with theoretical models. To assess the performance of shunted junctions in the terahertz range, their characteristics were studied under the influence of a high-frequency signal; the estimated value of the characteristic voltage for the shunted junction at a high frequency is about 1 mV. To improve the circuit parameters, a new type of the shunting based on application of NIS junctions was proposed, which reduces the influence of parasitic inductance, expands the frequency range of the generator, and decreases the size of the structure. The JJs with a new type of shunting have been fabricated and studied. The niobium integrated circuits intended for matching the superconducting oscillator and an SIS junction as a microwave detector were designed, fabricated, and tested. Such structures are required for studying the spectral characteristics and analyzing the operation of the oscillator. The developed circuits have demonstrated efficient operation at frequencies from 300 to 700 GHz; the experimental results are in good agreement with the simulated characteristics. The results obtained will be implemented for further development of the THz range oscillators.

IEEE Transactions on Applied SuperconductivityNov 23, 20217 citations

Design of Superconducting Integrated Matching Circuits

Fedor V. Khan, A. A. Atepalikhin, Lyudmila V. Filippenko +1 more

Abstract In this paper, we developed and investigated superconducting integrated circuits designed to match the impedances of a generator represented by a flux-flow oscillator based on a long Josephson junction and a detector based on a superconductor–insulator–superconductor tunnel junction in the subterahertz frequency range. The structures were modeled using the transfer matrix method. Designs were also calculated in the program of numerical three-dimensional modeling. A qualitative agreement was found between the results obtained by two methods. Three samples with different topologies were designed, covering the frequency range of 250–680 GHz at a level of –2 dB.

Journal of Communications Technology and ElectronicsOct 1, 20232 citations

Superconducting millimeter wave oscillators and SIS mixers integrated on a chip

V. P. Koshelets, А. В. Щукин, S. V. Shitov +1 more

All-refractory material superconducting millimeter-wave oscillators have been designed and investigated experimentally with different superconductor-insulator-superconductor (SIS) mixers integrated on the same chip. Tested structures include a flux-flow oscillator (FFO) based on a long Josephson junction, a coupling section, and an SIS detector with tuned out junction capacitance. Coupling sections were designed as multistep microstrip quarter-wave impedance transformers. All junctions have been fabricated on the basis of a high-quality trilayer Nb-AlO/sub x/-Nb process. Microwave oscillations in the frequency range 75-500 GHz have been detected experimentally. The level of delivered power was estimated from the pumped I-V curve of the strongly coupled single junction detector. Coupled power levels higher than 0.1 mu W at 256 GHz were achieved. A spectral linewidth of the FFO of less than 1 MHz has been estimated experimentally. The first attempt to create an integrated receiver based on an FFO and an SIS array mixer integrated on the same chip was made in the 2-mm wavelength band.>

IEEE Transactions on Applied SuperconductivityMar 1, 199367 citations

Superconducting Integrated Microcircuits Based on NbTiN/Al Transmission Lines Operating at Frequencies Above 1 THz

Nickolay V. Kinev, Artem M. Chekushkin, Fedor V. Khan +1 more

The results of the development and testing of superconducting integrated microcircuits based on NbTiN/Al transmission lines at the frequencies up to 1.1 THz are presented. The integrated circuits consist of a slot planar antenna made of thin film of NbTiN coupled to a NbTiN/Al microstrip line, and a superconductor-insulator-superconductor (SIS) junction based on Nb/AlN/NbN operating as a terahertz (THz) detector. Two different designs having the operating range of 0.9-1.2 THz were numerically simulated, fabricated and experimentally tested. A strong pumping of SIS detector by a signal of the backward wave oscillator (BWO) around frequency of 1.05 THz was observed, which demonstrated the applicability of fabricated transmission lines at frequencies higher than 750 GHz, where the traditionally used Nb/Nb transmission lines cannot operate.

Radiation and Scattering of Electromagnetic Waves (RSEMW)Jun 26, 20232 citations

Development of Advanced Superconductor-Insulator-Superconductor Mixers for Terahertz Radio Astronomy

Kirill I. Rudakov

Cosmic dust, cold matter and many other objects at far space have many spectral lines at the THz frequency range, leading to a rich information spectrum for astronomical observations. Ordinarily, these detected sub-mm signals from space are weak, and consequently very sensitive detectors are required to reduce the minimal time of the measurements with the desired accuracy. The main focus of this work is the design and development of superconducting high-frequency waveguide receivers at 211-275 GHz, 600-720 GHz and 780-950 GHz frequency ranges, in addition to superconducting planar integrated circuits matched with a planar Flux-Flow-Oscillator. This work is bridging the calculation methods applied for the design on one hand and the development of experimental instruments on the other.

Jun 25, 20214 citations