IEEE Transactions on Applied Superconductivity

60-GHz Single Flux Quantum Pulse Transfer Circuit for Serial Biasing

Ashish Shukla, Dmitri E. Kirichenko, Timur V. Filippov, Anubhav Sahu, A. Erik Lehmann, Mingoo Seok, Deepnarayan Gupta

Published Jan 23, 2023• 5 citations

Abstract

Serial Biasing (SB) is a technique to reduce the total DC bias current of Rapid Single Flux Quantum (RSFQ) circuits by partitioning a design into several islands with isolated grounds and sequential biasing. In this paper we focus on the design of a driver-receiver pair (DRP) to transfer pulses between islands that are galvanically isolated for pulse streams. We discuss both DRP itself and the structure for its testing, that comprises several DRPs connected in series, on-chip pseudo random binary sequence (PRBS) generator for circuit stimulation, and HF output interface. We use the layout of DRPs’ chain as an example to illustrate the advantage of the grapevine (GV) approach, introduced earlier, to manage the bias current flowing into and out of an island. The GV current management technique is analyzed by both electromagnetic simulations and measurement, compared, and contrasted with the so-called ‘straightforward’ (SF) approach. The maximum operational frequency for SF test structure was 10 GHz with zero margins for the SB current. Measurements of the GV structure at 10 GHz demonstrated BER of 10−12with ±5.8% margins for SB current. We observed the correct operation of the 5-island DRP chain up to 60 GHz using the grapevine approach for SB current management. All chips were fabricated at MIT Lincoln Laboratory using SFQ5ee fab node.

DOI: 10.1109/tasc.2023.3238990

Related papers

Serial Biasing Technique for Electronic Design Automation in RSFQ Circuits

Ashish Shukla, Timur V. Filippov, Dmitri E. Kirichenko +4 more

There has been renewed interest and efforts in increasing the complexity of superconductor circuits by means of electronic design automation (EDA). Serial biasing (SB) is a technique that reduces the total dc bias current required by large rapid single flux quantum (RSFQ) circuits, including its energy-efficient variant, ERSFQ. We believe SB needs to be incorporated in any EDA flow for large circuits. In SB, equally biased circuit blocks are placed on galvanically isolated islands and biased in series. SFQ pulses are transferred between islands by means of driver-receiver pairs (DRPs). The special current management technique, called the grapevine (GV) approach and introduced earlier, is used to handle the bias current flowing in and out of an island. In this article, we present all required layout primitives needed to implement SB for the IARPA-led SuperTools cell library that targets the SFQ5ee fab node at MIT Lincoln Laboratory. We discuss the horizontal and vertical composite driver-receiver pairs that comprise not only DRPs but also transmitters and receivers for passive transmission lines. We present the basic blocks to implement the GV managing technique for current injection and extraction. As a proof of concept, we designed a four-island test circuit that comprises all discussed layout primitives and employs an on-chip pseudorandom binary sequence generator as a test pattern source. The test circuit worked up to 50 GHz at the BER level of 10−12. We discuss future steps to improve the SB technique.

IEEE Transactions on Applied SuperconductivityOct 14, 20224 citations

Pulse Interfaces and Current Management Techniques for Serially Biased RSFQ Circuits

Ashish Shukla, Dmitri E. Kirichenko, Timur V. Filippov +4 more

As digital superconductor circuits based on Rapid Single Flux Quantum (RSFQ) logic scale up in complexity, so does the total current required to provide dc bias. Serial biasing (SB) is a promising solution that can be used to reduce the current by placing identical digital blocks on islands with isolated grounds and bias them sequentially. There are typically two implementations that are essential for the SB approach: the design of a driver-receiver pair (DRP) for inter-island pulse transport and the current management technique to handle the bias current flowing into and out of an island. While a DRP with good fidelity is essential for any serially biased circuit, the current management becomes critical for designs with relatively large bias current. In this paper, we address the latter. First, we propose a grapevine biasing scheme for serial bias current management. Second, we implement the technique using two exemplar circuits: the parallel counter and the digital decimation filter. We report the low and high speed test results up to 50 GHz for both circuits fabricated at MIT-LL in the SFQ5ee 10 kA/2 Ω fab node.

IEEE Transactions on Applied SuperconductivityJan 13, 20229 citations

Serially Biased Components for Digital-RF Receiver

Timur V. Filippov, Anubhav Sahu, Saad M. Sarwana +2 more

Reduction of total bias current using the serial biasing technique is required for RSFQ-based digital-RF receiver realization. This will have a major impact on reducing the size, weight and power consumption of the complete cryocooled receiver system. The approach is based on partitioning a homogeneous design into several isolated islands biased in series and transmitting SFQ pulses between islands, over moats through inductively-coupled driver-receiver-pairs (DRPs). Experimental data on testing of 100 DRPs connected in series are reported and bit-error-rate estimates are given. Our goal is to serially bias two sets of homogeneous circuit blocks in the digital-RF receiver design: (1) digital decimation filter (DDF) bit slices, and (2) output drivers. The correct operation of test chips containing four bit-slices of a second-order DDF, partitioned into 2 and 4 islands, are demonstrated. Results of 8 output drivers, serially biased on 2, 4, and 8 islands, are reported. Design issues of scaling to a digital-RF receiver, containing 18-20 DDF bit slices and 16 output drivers are discussed.

IEEE Transactions on Applied SuperconductivityJun 1, 200926 citations

Characteristics of driver and receiver circuits with a passive transmission line in RSFQ circuits

Hideo Suzuki, Shuichi Nagasawa, Kazunori Miyahara +1 more

We report simulated results of-rapid single flux quantum (SFQ) circuits having driver, receiver, and passive transmission lines for propagating SFQ pulses to investigate the design criteria. We have studied the equivalent input/output resistance of the driver/receiver in various bias conditions and found that the resistance is almost proportional to the bias current of the driver/receiver. Furthermore, we have proposed inserting a series resistor at the end of the superconducting passive transmission line (PTL) for avoiding undesirable flux trapping in the loop and for isolation in regard to the DC current. We also found that the reduction of the bias margin due to the resistance is rather small when the resistance is much smaller than the impedance of the PTL. An operating margin of more than 30% was obtained in the driver/receiver circuits including the PTL and the series resistor.

IEEE Transactions on Applied SuperconductivityJan 1, 200030 citations

Power Optimization of 50 GHz ERSFQ Circuits

Mustapha M. Habib, Timur V. Filippov, Anubhav Sahu +3 more

The Energy-efficient Rapid Single Flux Quantum (ERSFQ) logic family offers zero-static power dissipation. Any ERSFQ circuit requires a feeding Josephson transmission line (FJTL), a relatively large active transmission line, which serves as an accurate voltage source. For proper operation, the FJTL needs to be continuously pumped at a frequency that is equal to or higher than the highest clock frequency of the ERSFQ circuit. We selected an on-chip pseudo-random binary sequence (PRBS) generator as the example circuit since it naturally facilitates quantitative measurements of operating bias margins in terms of bit error rate (BER). Using external and internal flux pump sources, we performed extensive experimental studies on BER for ERSFQ PRBS generators operating at clock frequencies up to 50 GHz. We paid special attention to the over-pumping regime, where the FJTL pump frequency is higher than the PRBS clock frequency and confirmed its superiority in improving BER. At 35.56 GHz clock frequency, a group of 4 PRBS generators and 4 individual FJTLs with the bias current ratio (BCR) equal to 1, had a BER lower than 10−12and bias margins of ±25% for internal and external flux pump sources over-pumping at 6.25% above clock frequency. The maximal operational clock frequency of a single ERSFQ PRBS generator with intrinsic pump source (+6.25% over-pumping) and BER−12was 49.53 GHz. We also focused on optimization of the FJTL's size to reduce the power consumption and the area occupied by the FJTL itself. All chips were fabricated at MIT-Lincoln Laboratory using the SFQ5ee fab node. Future steps required for better understanding of ERSFQ operation are discussed.

IEEE Transactions on Applied SuperconductivityJan 27, 20237 citations

Current Recycling in Heterogeneous RSFQ Circuits

Tejumadejesu Oluwadamilare, Eby G. Friedman

As single flux quantum (SFQ) circuit complexities scale, larger bias currents are required. The large current produces excessive heat and greatly complicates the design process. Current recycling offers a solution by reducing the required bias current through serially biased circuit blocks. Serial biasing is typically achieved in homogeneous SFQ systems where similar bias currents are required in similar circuits. Each of these homogeneous circuits is often placed on different ground planes and serially biased to reuse the bias currents. To address heterogeneous circuits with varying bias current requirements, a novel serial biasing technique is proposed. An interface between the ground planes with unequal bias current is presented that exhibits a current balancing capability. The interface supplies additional current before passing the current to the next ground plane. The ground planes are arranged in ascending order of bias current to manage the complexity of these heterogeneous circuits. Using a one bit SFQ full adder as an example, the proposed approach demonstrates several key benefits: a 49% reduction in the number of driver-receiver pairs, a 6.5% reduction in power dissipation, and a 35% reduction in bias current across a heterogeneous SFQ circuit placed on three isolated ground planes. The performance, bias current margins, and methods for current reduction are also discussed, showcasing the effectiveness of current recycling in improving the efficiency of complex heterogeneous SFQ systems.

IEEE Transactions on Applied SuperconductivityJan 16, 20252 citations