We present an enhanced informed dynamic scheduling (IDS) strategy to avoid propagations of unreliable messages in the residual belief-propagation (RBP) algorithm for decoding low-density parity-check (LDPC) codes. To reduce the resource needed for updating the degree-one variable nodes (VNs) in an RBP-based algorithm for decoding 5G New Radio (NR) LDPC codes, we further introduce a process consisting of several simple procedures for managing the resource consumption. Simulation results demonstrate that our RBP algorithm based on the proposed IDS strategy outperforms existing RBP-based algorithms at the early decoding iterations. By using our degree-one VN resource managing approach, the performance of both the proposed and the existing decoders is significantly improved in decoding the 5G NR codes.
We present an enhanced informed dynamic scheduling (IDS) strategy to avoid propagations of unreliable messages in the residual belief-propagation (RBP) algorithm for decoding low-density parity-check (LDPC) codes. To reduce the resource needed for updating the degree-one variable nodes (VNs) in an RBP-based algorithm for decoding 5G New Radio (NR) LDPC codes, we further introduce a process consisting of several simple procedures for managing the resource consumption. Simulation results demonstrate that our RBP algorithm based on the proposed IDS strategy outperforms existing RBP-based algorithms at the early decoding iterations. By using our degree-one VN resource managing approach, the performance of both the proposed and the existing decoders is significantly improved in decoding the 5G NR codes.
In this paper, we propose two new scheduling algorithms to address the issues of existing informed dynamic scheduling (IDS) decoding algorithms of short low-density parity-check (LDPC) codes for the fifth-generation (5G) new radio (NR). The first issue is the complexity problem, where the high complexity of IDS makes hardware implementation difficult. By considering the impact of puncturing for the first two columns of base matrices, the proposed least-punctured and sum-residual-based (LPSRB) algorithm can reduce decoding complexity. The second issue is the significant degradation of decoding performance when the code length is short. By fully utilizing residuals, the proposed novel residual belief propagation (NRBP) algorithm allocates a significant amount of decoding resources to the less convergent edges. Simulation results demonstrate that NRBP achieves better frame error rate (FER) performance for short LDPC codes.
When residual belief-propagation (RBP), which is a kind of informed dynamic scheduling (IDS), is applied to low-density parity-check (LDPC) codes, the convergence speed in error-rate performance can be significantly improved. However, the RBP decoders presented in previous literature suffer from poor convergence error-rate performance due to the two phenomena explored in this paper. The first is the greedy-group phenomenon, which results in a small part of the decoding graph occupying most of the decoding resources. By limiting the number of updates for each edge message in the decoding graph, the proposed Quota-based RBP (Q-RBP) schedule can reduce the probability of greedy groups forming. The other phenomenon is the silent-variable-nodes issue, which is a condition where some variable nodes have no chance of contributing their intrinsic messages to the decoding process. As a result, we propose the Silent-Variable-Node-Free RBP (SVNF-RBP) schedule, which can force all variable nodes to contribute their intrinsic messages to the decoding process equally. Both the Q-RBP and the SVNF-RBP provide appealing convergence speed and convergence error-rate performance compared to previous IDS decoders for both dedicated and punctured LDPC codes.
The informed dynamic scheduling (IDS) strategies for decoding of low-density parity-check codes obtained superior performance in error correction performance and convergence speed. However, there are still two problems existing in the current IDS algorithms. The first is that the current IDS algorithms only preferentially update the selected unreliable messages, but they do not guarantee the updating is performed with reliable information. In this paper, a two-step message selecting strategy is introduced. On the basis of the two reliability metrics and two types of variable node residuals, the residual belief propagation (BP) decoding algorithm, short for TRM-TVRBP, is proposed. With the algorithm, the reliability of the updating-messages can be improved. The second is the greediness problem, prevalently existed in the IDS-like algorithms. The problem arises mainly from the fact that the major computing resources are allocated to or concentrated on some nodes and edges. To overcome the problem, the reliability metric-based RBP algorithm (RM-RBP) is proposed, which can force every variable node to contribute its intrinsic information to the iterative decoding. At the same time, the algorithm can force the related variable nodes to be updated, and make every edge have an equal opportunity of being updated. The simulation results show that both the TRM-TVRBP and the RM-RBP have appealing convergence rate and error-correcting performance compared with the previous IDS decoders over the white Gaussian noise (AWGN) channel.
Belief-propagation (BP) algorithm and its variants are well-established methods for iterative decoding of LDPC codes. Among them, residual belief-propagation (RBP), which is the most primitive and representative informed dynamic scheduling (IDS) strategy, can significantly accelerate the convergence speed. However, RBP decoding suffers from a poor convergence error-rate performance due to its greedy property, which is one of the challenging issues in the design of IDS strategies. To tackle this problem, a novel IDS scheme, namely residual-decaying-based residual belief-propagation (RD-RBP) algorithm, is presented in this paper. In RD-RBP, a decaying mechanism is introduced to manipulate the residuals of those check-to-variable messages, preventing the decoding resources from being unreasonably occupied by a small group of edges in the Tanner graph. The greediness is therefore alleviated and better performance of convergence error-rate is achieved. Besides, a two-stage scheduling scheme combining prior-art variable-node and variable-to-check-edge RBP (V-VCRBP) with RD-RBP, named V-VC-RD-RBP, is proposed for achieving both fast convergence speed and a low convergence error-rate. The simulation results validate the advantages of the proposed schemes.
Low-density parity-check (LDPC) codes have been chosen for the fifth-generation (5G) new radio (NR) enhanced Mobile Broad Band (eMBB) data channel. Since NR LDPC codes puncture the first two block columns of the parity-check matrix, the decoding complexity is reduced, but it slows down the convergence rate. In this letter, we propose a fixed schedule that decodes the layers with the least-punctured edges and those with the highest-degree (LPHD), which has much faster convergence speed than conventional schemes. The fixed scheduling schemes cannot take full advantage of the dynamic changes of decoding messages. As a result, the residual-based layered belief propagation (RB-LBP) is proposed to rearrange the layers dynamically among different iterations. Compared with some informed dynamic scheduling (IDS) strategies, RB-LBP reduces the decoding complexity with slight performance loss.
Low‐density parity‐check (LDPC) codes have excellent performance for a wide range of applications at reasonable complexity. LDPC codes with short blocks avoid the high latency of codes with large block lengths, making them potential candidates for ultra reliable low‐latency applications of future wireless standards. In this work, a novel informed dynamic scheduling (IDS) strategy for decoding LDPC codes, denoted reliability‐based residual belief propagation (Rel‐RBP), is developed by exploiting the reliability of the message and the residuals of the possible updates to choose the messages to be used by the decoding algorithm. A different measure for each iteration of the IDS schemes is also presented, which underlies the high cost of those algorithms in terms of computational complexity and motivates the development of the proposed strategy. Simulations show that Rel‐RBP speeds up the decoding at reduced complexity and results in error rate performance gains over prior work.