When residual belief-propagation (RBP), which is a kind of informed dynamic scheduling (IDS), is applied to low-density parity-check (LDPC) codes, the convergence speed in error-rate performance can be significantly improved. However, the RBP decoders presented in previous literature suffer from poor convergence error-rate performance due to the two phenomena explored in this paper. The first is the greedy-group phenomenon, which results in a small part of the decoding graph occupying most of the decoding resources. By limiting the number of updates for each edge message in the decoding graph, the proposed Quota-based RBP (Q-RBP) schedule can reduce the probability of greedy groups forming. The other phenomenon is the silent-variable-nodes issue, which is a condition where some variable nodes have no chance of contributing their intrinsic messages to the decoding process. As a result, we propose the Silent-Variable-Node-Free RBP (SVNF-RBP) schedule, which can force all variable nodes to contribute their intrinsic messages to the decoding process equally. Both the Q-RBP and the SVNF-RBP provide appealing convergence speed and convergence error-rate performance compared to previous IDS decoders for both dedicated and punctured LDPC codes.
When residual belief-propagation (RBP), which is a kind of informed dynamic scheduling (IDS), is applied to low-density parity-check (LDPC) codes, the convergence speed in error-rate performance can be significantly improved. However, the RBP decoders presented in previous literature suffer from poor convergence error-rate performance due to the two phenomena explored in this paper. The first is the greedy-group phenomenon, which results in a small part of the decoding graph occupying most of the decoding resources. By limiting the number of updates for each edge message in the decoding graph, the proposed Quota-based RBP (Q-RBP) schedule can reduce the probability of greedy groups forming. The other phenomenon is the silent-variable-nodes issue, which is a condition where some variable nodes have no chance of contributing their intrinsic messages to the decoding process. As a result, we propose the Silent-Variable-Node-Free RBP (SVNF-RBP) schedule, which can force all variable nodes to contribute their intrinsic messages to the decoding process equally. Both the Q-RBP and the SVNF-RBP provide appealing convergence speed and convergence error-rate performance compared to previous IDS decoders for both dedicated and punctured LDPC codes.
Belief-propagation (BP) algorithm and its variants are well-established methods for iterative decoding of LDPC codes. Among them, residual belief-propagation (RBP), which is the most primitive and representative informed dynamic scheduling (IDS) strategy, can significantly accelerate the convergence speed. However, RBP decoding suffers from a poor convergence error-rate performance due to its greedy property, which is one of the challenging issues in the design of IDS strategies. To tackle this problem, a novel IDS scheme, namely residual-decaying-based residual belief-propagation (RD-RBP) algorithm, is presented in this paper. In RD-RBP, a decaying mechanism is introduced to manipulate the residuals of those check-to-variable messages, preventing the decoding resources from being unreasonably occupied by a small group of edges in the Tanner graph. The greediness is therefore alleviated and better performance of convergence error-rate is achieved. Besides, a two-stage scheduling scheme combining prior-art variable-node and variable-to-check-edge RBP (V-VCRBP) with RD-RBP, named V-VC-RD-RBP, is proposed for achieving both fast convergence speed and a low convergence error-rate. The simulation results validate the advantages of the proposed schemes.
The informed dynamic scheduling (IDS) strategies for decoding of low-density parity-check codes obtained superior performance in error correction performance and convergence speed. However, there are still two problems existing in the current IDS algorithms. The first is that the current IDS algorithms only preferentially update the selected unreliable messages, but they do not guarantee the updating is performed with reliable information. In this paper, a two-step message selecting strategy is introduced. On the basis of the two reliability metrics and two types of variable node residuals, the residual belief propagation (BP) decoding algorithm, short for TRM-TVRBP, is proposed. With the algorithm, the reliability of the updating-messages can be improved. The second is the greediness problem, prevalently existed in the IDS-like algorithms. The problem arises mainly from the fact that the major computing resources are allocated to or concentrated on some nodes and edges. To overcome the problem, the reliability metric-based RBP algorithm (RM-RBP) is proposed, which can force every variable node to contribute its intrinsic information to the iterative decoding. At the same time, the algorithm can force the related variable nodes to be updated, and make every edge have an equal opportunity of being updated. The simulation results show that both the TRM-TVRBP and the RM-RBP have appealing convergence rate and error-correcting performance compared with the previous IDS decoders over the white Gaussian noise (AWGN) channel.
After the publication of the residual belief-propagation (RBP) algorithm, many low-density parity-check (LDPC) decoders using informed dynamic scheduling (IDS) have been investigated. In this paper, we propose the twofold-RBP (T-RBP) decoder that combines two residuals. Using T-RBP, significant improvement can be achieved in both convergence speed and convergence error-rate performance. In addition to T-RBP, the simplified-RBP (S-RBP) decoder is also proposed in order to reduce the complexity. Instead of comparing all the residuals of all edges in the code graph, as with previous IDS decoders, S-RBP only compares the residuals of the edges connected to a single check node, thus dramatically reduces the complexity without any significant degradation in performance. The proposed T-RBP and S-RBP can improve not only the performance of dedicated codes, but also that of punctured codes, especially the convergence speed. The improvement can make punctured LDPC codes more practical and becoming a competitive candidate for the rate compatible applications.
We present an enhanced informed dynamic scheduling (IDS) strategy to avoid propagations of unreliable messages in the residual belief-propagation (RBP) algorithm for decoding low-density parity-check (LDPC) codes. To reduce the resource needed for updating the degree-one variable nodes (VNs) in an RBP-based algorithm for decoding 5G New Radio (NR) LDPC codes, we further introduce a process consisting of several simple procedures for managing the resource consumption. Simulation results demonstrate that our RBP algorithm based on the proposed IDS strategy outperforms existing RBP-based algorithms at the early decoding iterations. By using our degree-one VN resource managing approach, the performance of both the proposed and the existing decoders is significantly improved in decoding the 5G NR codes.
Low-Density Parity-Check (LDPC) codes are usually decoded by running an iterative belief-propagation (BP), or message-passing, algorithm over the factor graph of the code. The traditional message-passing scheduling, called flooding, consists of updating all the variable nodes in the graph, using the same pre-update information, followed by updating all the check nodes of the graph, again, using the same pre-update information. Recently, several studies show that sequential scheduling, in which messages are generated using the latest available information, significantly improves the convergence speed in terms of number of iterations. Sequential scheduling introduces the problem of finding the best sequence of message updates. We propose Informed Dynamic Scheduling (IDS) strategies that select the message-passing schedule according to the observed rate of change of the messages. In general, IDS strategies require computation to select the message to update but converge in fewer message updates because they focus on the part of the graph that has not converged. Moreover, IDS yields a lower error-rate performance than either flooding or sequential scheduling because IDS strategies overcome traditional trapping-set errors. This paper presents IDS strategies that address several issues including performance for short-blocklength codes, complexity, and implementability.
The informed dynamic scheduling (IDS) strategies for the low-density parity check (LDPC) decoding have shown superior performance in error correction and convergence speed, particularly those based on reliability measures and residual belief propagation (RBP). However, the search for the most unreliable variable nodes and the residual precomputation required for each iteration of the IDS-LDPC increases the complexity of the decoding process which becomes more sequential, making it hard to exploit the parallelism of signal processing algorithms available in multicore platforms. To overcome this problem, a new, low-complexity scheduling system, called layered vicinal variable nodes scheduling (LWNS) is presented in this paper. With this LWNS, each variable node is updated by exchanging intrinsic information with all its associated control and variable nodes before moving to the next variable node updating. The proposed scheduling strategy is fixed by a preprocessing step of the parity control matrix instead of calculation of the residuals values and by computation of the most influential variable node instead the most unreliable metric. It also allows the parallel processing of independent Tanner graph subbranches identified and grouped in layers. Our simulation results show that the LWNS BP have an attractive convergence rate and better error correction performance with low complexity when compared to previous IDS decoders under the white Gaussian noise channel (AWGN).