Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Infrared, Millimeter-Wave, and Terahertz Technologies

Preliminary design of a superconducting heterodyne array receiver for Leighton Chajnantor Telescope

Shuqin Wang, Dong Liu, Boliang Liu, Ming Yao, Duo Cao, Feng Liu, Wangzhou Shi, Chenggang Shu, Sheng‐Cai Shi

Published Dec 16, 2022• 4 citations
Publisher

Abstract

The Leighton Chajnantor Telescope (LCT) project, sponsored by Shanghai Normal University in collaboration with Caltech and the University of Concepción, is seeking to relocate the Caltech Submillimeter Observatory (CSO)[1] from Mauna Kea, Hawaii to Llano de Chajnantor Observatory on the Chajnantor Plateau in Chile. The LCT will be equipped with a new 345-GHz band heterodyne array receiver of 3×3 beams and quantum-limited sensitivity. Based on superconducting Nb/Al-AlOx/Nb tunnel junction (SIS) mixers, we have developed a compact 1×3 array as one unit of the new heterodyne array receiver. Detailed design and measurement results will be presented.

DOI
10.1117/12.2641392

Related papers

Design of 345/650 GHz SIS mixers: backup for the LCT dual-color heterodyne receiver

Boxun Wang, Yao Li, Minran Chen +4 more

The Leighton Chajnantor Telescope (LCT) is an international cooperation project among Caltech, University of Concepcion (UdeC), and Shanghai Normal University (ShNU), which aims to relocate the Caltech Submillimeter Observatory (CSO) telescope from Mauna Kea, Hawaii to the Chajnantor plateau in northern Chile. ShNU has the opportunity to upgrade a 345/650 GHz dual-color SIS receiver, which was made by Caltech, for the LCT. In order to technically support this dual-color receiver, 345/650 GHz SIS mixers were designed and optimized based on the existing superconducting technology in the lab of ShNU. Within the proposed frequency range, both mixers show good sensitivity and gain characteristics. The optimized mixers show a DSB noise temperature of 24K and a conversion gain of 4.2dB at 345GHz, and a DSB noise temperature of 61K and a conversion gain of -2.9dB at 650GHz, respectively. Detailed design and results will be provided.

Infrared, Millimeter-Wave, and Terahertz Technologies•Oct 12, 2023•2 citations

High Frequency Effects and Performance of a 600 GHz-635 GHz SIS Receiver Using Nb/A10x/Nb Junctions

Morvan C. Salez, Pascal Febvre, William R. McGrath +2 more

A 600 GHz - 635 GHz waveguide SIS heterodyne receiver was built and used for astronomical observations at the Caltech Submillimeter Observatory (CSO) in Hawaii.

Softwaretechnik-Trends•May 1, 1994•2 citations

Design and analysis of 230 GHz all-NbN superconductor-insulator-superconductor mixer

Minran Chen, Peng Chen, Lin‐Jie Zhang +7 more

In this work, a 230 GHz all-NbN superconductor-insulator-superconductor (SIS) mixer was designed and analyzed. The NbN/AlN/NbN tunnel junctions (with an energy gap of 5.7 meV) and NbN/MgO/NbN tuning circuits were utilized. Full-height waveguides and bow-tie waveguide probes were adopted. The signal coupling circuit was designed and optimized to be transmissible to the given band. The quantum mixing characteristics of the all-NbN mixers were optimized with different-size SIS junctions. The mixer with a junction diameter of 1 μm achieves a conversion gain close to 0 dB and a noise temperature close to 40 K. The proposed design and analysis will provide technical support for the recovery and upgrade of the heterodyne receiver for the Leighton Chajnantor Telescope (LCT).

Infrared, Millimeter-Wave, and Terahertz Technologies•Oct 11, 2024•1 citation

Superconducting detectors for submillimeter-wave astronomy

Eric E. Bloemhof

Sensitive heterodyne receivers are being built at ever higher frequencies with superconducting (SIS) junctions as the first mixer. These devices have extremely sharp non-linearities in their current-voltage characteristics as a result of quantum-mechanical tunneling of electrons across thin insulating barriers. The low energy scale set by the magnitude of the superconducting energy gap implies very low local oscillator power requirements for heterodyne operation. Some general system design considerations for astrophysical receivers are reviewed. These principles are illustrated by discussing two specific applications: a 230 GHz SIS receiver recently installed as a facility instrument at the Swedish-ESO submillimeter telescope in Chile, and the broader receiver requirements of the 6-antenna submillimeter array (SMA), an interferometer now being designed at the Harvard-Smithsonian Center for Astrophysics. The SMA will require receivers at frequencies as high as 820 GHz, and will place some unique demands on detector performance.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 15, 1993•0 citations

A 665 GHz Waveguide Receiver Using a Tuned 0.5 μm 2 Nb/AlO x /Nb SIS Tunnel Junction

J. Kooi, Mansun Chan, Henry George LeDuc +1 more

We report recent results on a 580-740 GHz SIS heterodyne receiver employing a tuned 0.50Am Nb/A10x/Nb SIS tunnel junction. The receiver has been successfully installed at the Caltech Submillimeter Observatory, Hawaii. Results of an untuned device in the same waveguide block were presented at the fifth International THz Conference. Since the mixer is meant to be operated near the superconducting gap frequency of niobium (2,L/h 690 GHz), special has been taken to minimize the absorption loss in the rf matching network. To this effect we propose the use of a RF matching network that constitutes a hybrid between the well know end-loaded stub and radial stub matching networks. We have measured uncorrected DSB receiver temperatures as low as 160K from 680to 702 Gliz, 200K at 725GHz and 120K from 585-640 GHz. The uncorrected mixer noise temperature at 702 Gliz is about 125K, of which 62K can be directly contributed to the front end optics loss. Mixer conversion loss at 702 GHz is 7dB, of which 0.9dB is due to the absorption loss in the Nb film. This results in a corrected mixer noise temperature of 63K, 1.7 times the quantum noise limit.

Softwaretechnik-Trends•Mar 1, 1996•1 citation

Submillimeter mixers based on superconductive parallel junction arrays

Faouzi M. Boussaha, Morvan C. Salez, Y. Delorme +4 more

Observation and analysis of submillimeter-wave radiation (300GHz-3THz) in astronomy and atmospheric sciences requires increasingly performant receivers. The most sensitive receivers working in this range of electromagnetic spectrum use superconductor-insolator-superconductor (SIS) junctions. In order to increase the bandwidth and the sensitivity, we are developing a quantum-noise limited heterodyne receiver based on several parallel SIS junctions with broad (larger than 30%) fixed tuned bandwidth. These circuits can be viewed as passband filters which have been optimized by varying the spacings between junctions. We have designed such 5-junction arrays for operation in the range 480-640 GHz. Fabrication and heterodyne characterization of these devices has been done. The 1 μm2 junctions current density ranges from 4 to 13 kA/cm2, using optical lithography and Nb/Al2Nb5/Nb trilayer sputtering technology. The fabrication process and yield are presented in this paper, along with measured performances

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 25, 2003•1 citation
The Leighton Chajnantor Telescope (LCT) project, sponsored by Shanghai Normal University in collaboration with Caltech and the University of Concepción, is seeking to relocate the Caltech Submillimeter Observatory (CSO)[1] from Mauna Kea, Hawaii to Llano de Chajnantor Observatory on the Chajnantor Plateau in Chile. The LCT will be equipped with a new 345-GHz band heterodyne array receiver of 3×3 beams and quantum-limited sensitivity. Based on superconducting Nb/Al-AlOx/Nb tunnel junction (SIS) mixers, we have developed a compact 1×3 array as one unit of the new heterodyne array receiver. Detailed design and measurement results will be presented.
The Leighton Chajnantor Telescope (LCT) is an international cooperation project among Caltech, University of Concepcion (UdeC), and Shanghai Normal University (ShNU), which aims to relocate the Caltech Submillimeter Observatory (CSO) telescope from Mauna Kea, Hawaii to the Chajnantor plateau in northern Chile. ShNU has the opportunity to upgrade a 345/650 GHz dual-color SIS receiver, which was made by Caltech, for the LCT. In order to technically support this dual-color receiver, 345/650 GHz SIS mixers were designed and optimized based on the existing superconducting technology in the lab of ShNU. Within the proposed frequency range, both mixers show good sensitivity and gain characteristics. The optimized mixers show a DSB noise temperature of 24K and a conversion gain of 4.2dB at 345GHz, and a DSB noise temperature of 61K and a conversion gain of -2.9dB at 650GHz, respectively. Detailed design and results will be provided.
In this work, a 230 GHz all-NbN superconductor-insulator-superconductor (SIS) mixer was designed and analyzed. The NbN/AlN/NbN tunnel junctions (with an energy gap of 5.7 meV) and NbN/MgO/NbN tuning circuits were utilized. Full-height waveguides and bow-tie waveguide probes were adopted. The signal coupling circuit was designed and optimized to be transmissible to the given band. The quantum mixing characteristics of the all-NbN mixers were optimized with different-size SIS junctions. The mixer with a junction diameter of 1 μm achieves a conversion gain close to 0 dB and a noise temperature close to 40 K. The proposed design and analysis will provide technical support for the recovery and upgrade of the heterodyne receiver for the Leighton Chajnantor Telescope (LCT).
Sensitive heterodyne receivers are being built at ever higher frequencies with superconducting (SIS) junctions as the first mixer. These devices have extremely sharp non-linearities in their current-voltage characteristics as a result of quantum-mechanical tunneling of electrons across thin insulating barriers. The low energy scale set by the magnitude of the superconducting energy gap implies very low local oscillator power requirements for heterodyne operation. Some general system design considerations for astrophysical receivers are reviewed. These principles are illustrated by discussing two specific applications: a 230 GHz SIS receiver recently installed as a facility instrument at the Swedish-ESO submillimeter telescope in Chile, and the broader receiver requirements of the 6-antenna submillimeter array (SMA), an interferometer now being designed at the Harvard-Smithsonian Center for Astrophysics. The SMA will require receivers at frequencies as high as 820 GHz, and will place some unique demands on detector performance.
We report recent results on a 580-740 GHz SIS heterodyne receiver employing a tuned 0.50Am Nb/A10x/Nb SIS tunnel junction. The receiver has been successfully installed at the Caltech Submillimeter Observatory, Hawaii. Results of an untuned device in the same waveguide block were presented at the fifth International THz Conference. Since the mixer is meant to be operated near the superconducting gap frequency of niobium (2,L/h 690 GHz), special has been taken to minimize the absorption loss in the rf matching network. To this effect we propose the use of a RF matching network that constitutes a hybrid between the well know end-loaded stub and radial stub matching networks. We have measured uncorrected DSB receiver temperatures as low as 160K from 680to 702 Gliz, 200K at 725GHz and 120K from 585-640 GHz. The uncorrected mixer noise temperature at 702 Gliz is about 125K, of which 62K can be directly contributed to the front end optics loss. Mixer conversion loss at 702 GHz is 7dB, of which 0.9dB is due to the absorption loss in the Nb film. This results in a corrected mixer noise temperature of 63K, 1.7 times the quantum noise limit.
Observation and analysis of submillimeter-wave radiation (300GHz-3THz) in astronomy and atmospheric sciences requires increasingly performant receivers. The most sensitive receivers working in this range of electromagnetic spectrum use superconductor-insolator-superconductor (SIS) junctions. In order to increase the bandwidth and the sensitivity, we are developing a quantum-noise limited heterodyne receiver based on several parallel SIS junctions with broad (larger than 30%) fixed tuned bandwidth. These circuits can be viewed as passband filters which have been optimized by varying the spacings between junctions. We have designed such 5-junction arrays for operation in the range 480-640 GHz. Fabrication and heterodyne characterization of these devices has been done. The 1 μm2 junctions current density ranges from 4 to 13 kA/cm2, using optical lithography and Nb/Al2Nb5/Nb trilayer sputtering technology. The fabrication process and yield are presented in this paper, along with measured performances