Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Atom-based sensing technique of microwave electric and magnetic fields via a single rubidium vapor cell

Zhigang Feng, Xiaochi Liu, Yingyun Zhang, Weimin Ruan, Zhenfei Song, Jifeng Qu

Published Dec 23, 2022• 7 citations
Publisher

Abstract

We present an atom-based approach for determining microwave electric and magnetic fields by using a single rubidium vapor cell in a microwave waveguide. For a 87Rb cascade three-level system employed in our experiment, a weak probe laser driving the lower transition, 5S1/2→5P3/2, is first used to measure the microwave magnetic field based on the atomic Rabi resonance. When a counter-propagating strong coupling laser is subsequently turned on to drive the Rydberg transition, 5P3/2→67D5/2, the same probe laser is then used as a Rydberg electromagnetically induced transparency (EIT) probe to measure the microwave electric field by investigating the resonant microwave dressed Autler-Townes splitting (ATS). By tuning the hyperfine transition frequency of the ground state using an experimentally feasible static magnetic field, we first achieved a measurement of the microwave electric and magnetic field strength at the same microwave frequency of 6.916 GHz. Based on the ideal relationship between the electric and magnetic field components, we obtained the equivalent microwave magnetic fields by fitting the inversion to the measured microwave electric fields, which demonstrated that the results were in agreement with the experimental measurement of the microwave magnetic fields in the same microwave power range. This study provides new experimental evidence for quantum-based microwave measurements of electric and magnetic fields by a single sensor in the same system.

DOI
10.1364/oe.478064

Related papers

Multi-parameter microwave quantum sensing with a single atomic probe

Zhigang Feng, Xiaochi Liu, Zhenfei Song +1 more

We demonstrate a multi-parameter sensing scheme for free space microwave electric and magnetic fields in single vapor cell based on the atom-based microwave detection techniques. A weak probe laser though a rubidium vapor cell first acts as magnetic probe to measure the microwave magnetic field via atomic Rabi resonance of the ground state hyperfine transition. When another strong coupling laser is subsequently counter-propagated and overlapped with the probe laser in the same atomic vapor cell, the probe laser is then used as electric probe to measure microwave electric field by off-resonant microwave dressed Rydberg Autler-Townes splitting. We achieve measurement of microwave electric and magnetic fields without any complicated tuning methods at the clock frequency of 6.835 GHz. Based on the inherent relationship between microwave electric and magnetic fields, and their good linear response characteristics in respective suitable power ranges, the equivalent microwave magnetic fields are derived from linear fitting of the measured electric fields, which are in agreement with the calibrated experimental results within the same power range. This work provides an effective approach for extending the power dynamic range of atom-based microwave quantum sensors.

Scientific Reports•Feb 13, 2025•6 citations

Simultaneously measuring microwave electric fields at different frequencies by Rydberg-atom-based electrometry with Zeeman-resolved Autler–Townes splitting

Yuxiang Wang, Yuqing Liu, Qianyi Zhang +5 more

We provide the simultaneous traceable measurements of microwave electric fields at two different frequencies by the electromagnetically induced transparency (EIT) and Autler–Townes (AT) splitting. A static magnetic field working together with a linearly polarized probe and coupling light prepares Rydberg atoms in Zeeman sublevels with maximal |mJ| in an atomic vapor cell. Using the EIT-AT splitting of these two maximal |mJ| states, the microwave electric fields at two different frequencies are simultaneously measured, in which their frequency difference can be adjustable within the linear range of magnetic field-induced level shifts. The proposed method provides a promising prospect for calibrating multiple microwave frequencies simultaneously in the future.

AIP Advances•Oct 1, 2024•4 citations

Broadband Rydberg atom-based radio-frequency field sensor

Jiao Yue-Chun, Jianming Zhao, Jia Suo-Tang

Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.

Acta Physica Sinica•Jan 1, 2018•7 citations

Microwave electric field sensing with Rydberg atoms

Daniel T. Stack, Paul D. Kunz, David H. Meyer +1 more

Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 19, 2016•3 citations

Magnetic-field-induced splitting of Rydberg Electromagnetically Induced Transparency and Autler-Townes spectra in 87 Rb vapor cell

Xinheng Li, Yue Cui, Jianhai Hao +6 more

We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of 87 Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each m F state, resulting in multiple spectral peaks in the EIT-AT spectrum. A simplified analytical formula was developed to explain the EIT-AT spectrum in a static magnetic field, and the theoretical calculations agree qualitatively with experimental results. The Rydberg atom microwave electric field sensor performance was enhanced by making use of the splitting interval between the two maximum absolute m F states separated by the static magnetic field, which was attributed to the stronger Clebsch-Gordon coefficients between the extreme m F states and the frequency detuning of the microwave electric field under the static magnetic field. The traceable measurement limit of weak electric field by EIT-AT splitting method was extended by an order of magnitude, which is promising for precise microwave electric field measurement.

Optics Express•Oct 17, 2023•24 citations

Magnetic-field-induced splitting of Rydberg Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) spectra in $^{87}$Rb vapor cell

Xinheng Li, Yue Cui, Jianhai Hao +5 more

We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of $^{87}$Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each $m_F$ state, resulting in multiple spectral peaks in the EIT-AT spectrum. A simplified analytical formula was developed to explain the EIT-AT spectrum in a static magnetic field, and the calculations are in excellent agreement with experimental results.We further studied the enhancement of the Rydberg atom microwave electric field sensor performance by making use of the splitting interval between the two maximum absolute $m_F$ states under static magnetic field. The traceable measurement limit of weak electric field by EIT-AT splitting method was extended by an order of magnitude, which is promising for precise microwave electric field measurement.

arXiv:2306.13256•Jun 23, 2023•0 citations
We present an atom-based approach for determining microwave electric and magnetic fields by using a single rubidium vapor cell in a microwave waveguide. For a 87Rb cascade three-level system employed in our experiment, a weak probe laser driving the lower transition, 5S1/2→5P3/2, is first used to measure the microwave magnetic field based on the atomic Rabi resonance. When a counter-propagating strong coupling laser is subsequently turned on to drive the Rydberg transition, 5P3/2→67D5/2, the same probe laser is then used as a Rydberg electromagnetically induced transparency (EIT) probe to measure the microwave electric field by investigating the resonant microwave dressed Autler-Townes splitting (ATS). By tuning the hyperfine transition frequency of the ground state using an experimentally feasible static magnetic field, we first achieved a measurement of the microwave electric and magnetic field strength at the same microwave frequency of 6.916 GHz. Based on the ideal relationship between the electric and magnetic field components, we obtained the equivalent microwave magnetic fields by fitting the inversion to the measured microwave electric fields, which demonstrated that the results were in agreement with the experimental measurement of the microwave magnetic fields in the same microwave power range. This study provides new experimental evidence for quantum-based microwave measurements of electric and magnetic fields by a single sensor in the same system.
We demonstrate a multi-parameter sensing scheme for free space microwave electric and magnetic fields in single vapor cell based on the atom-based microwave detection techniques. A weak probe laser though a rubidium vapor cell first acts as magnetic probe to measure the microwave magnetic field via atomic Rabi resonance of the ground state hyperfine transition. When another strong coupling laser is subsequently counter-propagated and overlapped with the probe laser in the same atomic vapor cell, the probe laser is then used as electric probe to measure microwave electric field by off-resonant microwave dressed Rydberg Autler-Townes splitting. We achieve measurement of microwave electric and magnetic fields without any complicated tuning methods at the clock frequency of 6.835 GHz. Based on the inherent relationship between microwave electric and magnetic fields, and their good linear response characteristics in respective suitable power ranges, the equivalent microwave magnetic fields are derived from linear fitting of the measured electric fields, which are in agreement with the calibrated experimental results within the same power range. This work provides an effective approach for extending the power dynamic range of atom-based microwave quantum sensors.
We provide the simultaneous traceable measurements of microwave electric fields at two different frequencies by the electromagnetically induced transparency (EIT) and Autler–Townes (AT) splitting. A static magnetic field working together with a linearly polarized probe and coupling light prepares Rydberg atoms in Zeeman sublevels with maximal |mJ| in an atomic vapor cell. Using the EIT-AT splitting of these two maximal |mJ| states, the microwave electric fields at two different frequencies are simultaneously measured, in which their frequency difference can be adjustable within the linear range of magnetic field-induced level shifts. The proposed method provides a promising prospect for calibrating multiple microwave frequencies simultaneously in the future.
Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.
Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.
We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of 87 Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each m F state, resulting in multiple spectral peaks in the EIT-AT spectrum. A simplified analytical formula was developed to explain the EIT-AT spectrum in a static magnetic field, and the theoretical calculations agree qualitatively with experimental results. The Rydberg atom microwave electric field sensor performance was enhanced by making use of the splitting interval between the two maximum absolute m F states separated by the static magnetic field, which was attributed to the stronger Clebsch-Gordon coefficients between the extreme m F states and the frequency detuning of the microwave electric field under the static magnetic field. The traceable measurement limit of weak electric field by EIT-AT splitting method was extended by an order of magnitude, which is promising for precise microwave electric field measurement.
Magnetic-field-induced splitting of Rydberg Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) spectra in 87^{87}87Rb vapor cell
We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of 87^{87}87Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each mFm_FmF​ state, resulting in multiple spectral peaks in the EIT-AT spectrum. A simplified analytical formula was developed to explain the EIT-AT spectrum in a static magnetic field, and the calculations are in excellent agreement with experimental results.We further studied the enhancement of the Rydberg atom microwave electric field sensor performance by making use of the splitting interval between the two maximum absolute mFm_FmF​ states under static magnetic field. The traceable measurement limit of weak electric field by EIT-AT splitting method was extended by an order of magnitude, which is promising for precise microwave electric field measurement.