Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA)

Photonic detector for quantum applications: DiPho

Piotr Daniel, Grzegorz H. Kasprowicz, Krzysztof T. Pozniak

Published Dec 12, 2022• 0 citations
Publisher

Abstract

In this paper, the “DiPho” (Digital Photodiode) device is described. The device is used for quick verification measurements and performance monitoring of photonic sources used in quantum physics experiments. DiPho was designed as a stack of two printed circuit boards (PCB) – one contains the detection element, a silicon PIN photodiode, and analog front-end, while the other contains the necessary digital circuitry. The core of the analog front end is a programmable-gain trans-impedance amplifier which was designed to be capable of measuring photocurrents in the range of 10μA to 10mA. DiPho provides analog measurement output via SMA connector and digital data output via USB serial interface. Moreover, support for single-pair Ethernet (SPE) communication is planned.

DOI
10.1117/12.2660654

Related papers

A high-performance integrated single-photon detector for telecom wavelengths

Donald S. Bethune, W. P. Risk, Gary W. Pabst

A commercial avalanche photodiode (APD) and the circuitry needed to operate it as a single-photon detector (SPD) have been integrated onto a single PC board (PCB). At temperatures accessible with Peltier coolers (∼200–240 K), the PCB-SPD achieves high detection efficiency (DE) at 1308 and 1545 nm with low dark-count probability (e.g. ∼10−6/bias pulse at DE = 20%, 220 K), making it useful for quantum key distribution (QKD). The board generates fast bias pulses, cancels noise transients, amplifies the signals, and sends them to an on-board discriminator. A digital blanking circuit suppresses afterpulsing.

arXiv:quant-ph/0311112•Journal of Modern Optics•Jan 1, 2004•71 citations

Assembly and characterization of single-photon detectors for quantum networks

Enric Solé Aznar

The use of quantum technologies has risen drastically in the last decades, offering an enhancement in terms of the technological capabilities available nowadays. Found in this field of research, quantum communications based on the transmission of single photons offer new approaches to redefine the use of protocols and devices for specialised applications. As a final result, this leads to the accomplishment of long-range quantum networks with terrestrial and satellite-based communications set to establish a new scale of Telecommunication applications. Within these kinds of applications, this project focuses on the assembly of a single-photon detector using a photodiode of type Single-Photon Avalanche Diode (SPAD), essential device to define the level of performance of any quantum communication system. To carry this out, the system is assembled around its centre piece, an Excelitas APD operated in Geiger mode above its breakdown voltage. The electronic circuit that drives the photodiode is characterised to work with its adjusted bias voltage, its dedicated temperature management system and its active quenching circuit to detect pulses with certainty and precision. The final version of the project is adjusted to work in the 1300nm and 1500nm operating wavelengths as the photodiode used is formed by an InGaAs/InP semiconductor structure. Working on top of the original circuit provided initially, the experimental measurements obtained in the course of the project prove that the design modifications implemented have improved the functioning of the whole system. The main achievements accomplished encompass the generation of pulses for photon detection at 20kHz, the reduction of electromagnetic interferences by a factor 40, the enhancement of the manipulated signals in the circuit by a factor of tens, and the correct management of the SPAD temperature to maintain a fixed value of dark counts for a long time.

•Jul 1, 2026•0 citations

Quantum Microwave Photodetection Using Superconducting Josephson Circuits.

Brendan Osberg

Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.

•Sep 3, 2009•0 citations

Analysis of Photodiode Sensing Devices in a Photonic Integrated Chip solution for Quantum Computing

Luca Gemma, Martino Bernard, Mher Ghulinyan +1 more

From encryption to machine learning, the interest in quantum technologies is growing by the day. Many big companies are pushing the research and trying to develop a variety of techniques to achieve the so-called "quantum supremacy." Among all, there is one which is simpler to build an integrated system with: photonics. In this study, we illustrate the characterization for sensing elements of a prototype photonic integrated chip (PIC) where the photonic layer and the detector layer are homogeneously integrated. We fabricated in our facility a testing chip with silicon photodiodes as output devices. After the characterization discussed in this work, such detectors will be used as fully integrated sensing elements for a more advanced chip featuring thermistors as phase shifters in a multiple Mach-Zehnder Interferometers architecture.

Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...•Oct 25, 2020•2 citations

A Study for an Improved Design of Front-End Circuit of Superconducting Analog-to-Digital Converter

Futoshi Furuta, K. Saitoh

We have proposed an improved design of the front-end circuit for superconducting analog-to-digital (A/D) converters. The assumed structure of the A/D converter consists of a front-end circuit based on single flux quantum circuitry and a back-end circuit based on semiconductor circuits. To complete the A/D converter, it is necessary to enable synchronous operation between the front-end circuit and assumed back-end circuit. In the present framework, the front-end circuit consists of a ladder-type pulse generator, a modulator, a hybrid DEMUX, shift-registers and stack-type amplifiers. The voltage level of the output data signal is enlarged to about 10 mV by using stack-type amplifiers. Furthermore, the timing margin for synchronization is improved by using a hybrid demultiplexing method. We also have designed a front-end circuit based on the present framework and verified its functionalities at low speed. It was experimentally confirmed that the timing margin in a 1-to-4 hybrid DEMUX was enlarged to three times as large as in the conventional binary-tree DEMUX. A high-voltage output signal of 11 mV was also obtained. From these results, we conclude that functionalities of the designed front-end circuit are correct.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•6 citations

Hybrid Photonic Integrated Circuits for Quantum Communications

Moritz Kleinert, Jakob Reck, P. S. Ott +14 more

Compact, high-performance hybrid photonic integrated circuits (PICs) are crucial for advancing Quantum Communications. This paper presents recent examples from the PolyBoard platform, including a time-bin interferometer, a DV-QKD transmitter, and a heralded single photon source. Keywords: Quantum communication and quantum cryptography, Photonic integration, Photonic integrated circuits, Planar lightwave circuits (PLCs), Photonic quantum communication, Single-photon and quantum entangled photon-pair sources

OptoElectronics and Communications Conference and International Conference on Photonics in Switching and Computing (OECC/PSC)•Jun 29, 2025•0 citations
In this paper, the “DiPho” (Digital Photodiode) device is described. The device is used for quick verification measurements and performance monitoring of photonic sources used in quantum physics experiments. DiPho was designed as a stack of two printed circuit boards (PCB) – one contains the detection element, a silicon PIN photodiode, and analog front-end, while the other contains the necessary digital circuitry. The core of the analog front end is a programmable-gain trans-impedance amplifier which was designed to be capable of measuring photocurrents in the range of 10μA to 10mA. DiPho provides analog measurement output via SMA connector and digital data output via USB serial interface. Moreover, support for single-pair Ethernet (SPE) communication is planned.
A commercial avalanche photodiode (APD) and the circuitry needed to operate it as a single-photon detector (SPD) have been integrated onto a single PC board (PCB). At temperatures accessible with Peltier coolers (∼200–240 K), the PCB-SPD achieves high detection efficiency (DE) at 1308 and 1545 nm with low dark-count probability (e.g. ∼10−6/bias pulse at DE = 20%, 220 K), making it useful for quantum key distribution (QKD). The board generates fast bias pulses, cancels noise transients, amplifies the signals, and sends them to an on-board discriminator. A digital blanking circuit suppresses afterpulsing.
The use of quantum technologies has risen drastically in the last decades, offering an enhancement in terms of the technological capabilities available nowadays. Found in this field of research, quantum communications based on the transmission of single photons offer new approaches to redefine the use of protocols and devices for specialised applications. As a final result, this leads to the accomplishment of long-range quantum networks with terrestrial and satellite-based communications set to establish a new scale of Telecommunication applications. Within these kinds of applications, this project focuses on the assembly of a single-photon detector using a photodiode of type Single-Photon Avalanche Diode (SPAD), essential device to define the level of performance of any quantum communication system. To carry this out, the system is assembled around its centre piece, an Excelitas APD operated in Geiger mode above its breakdown voltage. The electronic circuit that drives the photodiode is characterised to work with its adjusted bias voltage, its dedicated temperature management system and its active quenching circuit to detect pulses with certainty and precision. The final version of the project is adjusted to work in the 1300nm and 1500nm operating wavelengths as the photodiode used is formed by an InGaAs/InP semiconductor structure. Working on top of the original circuit provided initially, the experimental measurements obtained in the course of the project prove that the design modifications implemented have improved the functioning of the whole system. The main achievements accomplished encompass the generation of pulses for photon detection at 20kHz, the reduction of electromagnetic interferences by a factor 40, the enhancement of the manipulated signals in the circuit by a factor of tens, and the correct management of the SPAD temperature to maintain a fixed value of dark counts for a long time.
Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.
From encryption to machine learning, the interest in quantum technologies is growing by the day. Many big companies are pushing the research and trying to develop a variety of techniques to achieve the so-called "quantum supremacy." Among all, there is one which is simpler to build an integrated system with: photonics. In this study, we illustrate the characterization for sensing elements of a prototype photonic integrated chip (PIC) where the photonic layer and the detector layer are homogeneously integrated. We fabricated in our facility a testing chip with silicon photodiodes as output devices. After the characterization discussed in this work, such detectors will be used as fully integrated sensing elements for a more advanced chip featuring thermistors as phase shifters in a multiple Mach-Zehnder Interferometers architecture.
We have proposed an improved design of the front-end circuit for superconducting analog-to-digital (A/D) converters. The assumed structure of the A/D converter consists of a front-end circuit based on single flux quantum circuitry and a back-end circuit based on semiconductor circuits. To complete the A/D converter, it is necessary to enable synchronous operation between the front-end circuit and assumed back-end circuit. In the present framework, the front-end circuit consists of a ladder-type pulse generator, a modulator, a hybrid DEMUX, shift-registers and stack-type amplifiers. The voltage level of the output data signal is enlarged to about 10 mV by using stack-type amplifiers. Furthermore, the timing margin for synchronization is improved by using a hybrid demultiplexing method. We also have designed a front-end circuit based on the present framework and verified its functionalities at low speed. It was experimentally confirmed that the timing margin in a 1-to-4 hybrid DEMUX was enlarged to three times as large as in the conventional binary-tree DEMUX. A high-voltage output signal of 11 mV was also obtained. From these results, we conclude that functionalities of the designed front-end circuit are correct.
Compact, high-performance hybrid photonic integrated circuits (PICs) are crucial for advancing Quantum Communications. This paper presents recent examples from the PolyBoard platform, including a time-bin interferometer, a DV-QKD transmitter, and a heralded single photon source. Keywords: Quantum communication and quantum cryptography, Photonic integration, Photonic integrated circuits, Planar lightwave circuits (PLCs), Photonic quantum communication, Single-photon and quantum entangled photon-pair sources