Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Low-noise and high-power second harmonic generation of 532 nm laser for trapping ultracold atoms

Xuan-Kai Wang, Zhaoyu Zhou, Meng-Da Li, Yong-Guang Zheng, Wei-Yong Zhang, Guo-Xian Su, Ming-Gen He, Zhen-Sheng Yuan

Published Dec 1, 2022• 6 citations
Publisher

Abstract

Optical lattices for coherently manipulating ultracold atoms demand high-power, low-noise, narrow-line-width, and continuous-wave lasers. Here, we report the implementation of a 30 W 532 nm low-noise laser by second harmonic generation from a 1064 nm fiber laser, which is capable to generate optical lattices for a quantum gas microscope of Rb87 atoms. The overall conversion efficiency is 59% at an input power of 51 W with a lithium triborate crystal coupled to a ring cavity. The relative intensity noise of the output laser is suppressed to -120 dBc/Hz in the range of 10 Hz-100 kHz with a high dynamic range of over 50 dB, which is suitable for long-term trapping and coherent manipulation of the quantum gases.

DOI
10.1063/5.0117561

Related papers

A high-power and low-noise 532-nm continuous-wave laser for quantum gas microscopy

Meng-Da Li, Yong-Guang Zheng, Wei-Yong Zhang +7 more

Low-noise, high-power 532-nm lasers are of great interest in many scientific research studies, such as gravitational wave detection and ultracold atom experiments. In particular, in the experiments of quantum gas microscopy, a large power of laser is necessary during the imaging process, while low noise is important for preventing the atoms from being heated up. In this work, we report on the generation of such a 532-nm continuous-wave laser by coherently combining two laser beams produced by single-pass second-harmonic generation. The power of the combined laser is up to 17 W. With the help of intensity stabilization, we are able to suppress the relative intensity noise to below -120 dBc/Hz. The generated laser satisfies the experimental requirements for integrating optical superlattices with a quantum gas microscope.

Review of Scientific Instruments•Aug 1, 2021•6 citations

High-power, 420-nm, low-intensity-noise laser source for quantum computing applications

Thomas Dubé, Coline Lavit, Dia Darwich +8 more

We demonstrate the generation of 20.2 W of continuous-wave, low-intensity noise, single-frequency light at 840 nm, obtained via sum-frequency mixing of two high-power infrared fiber laser systems in an MgO-doped periodically poled lithium niobate (ppLN) crystal. Subsequent cavity-enhanced frequency doubling to 420 nm yields an output power of 15.2 W. Respective conversion efficiencies of 48% and 79% are achieved for the sum-frequency and second-harmonic stages, with good beam quality (M 2 < 1.3), low intensity noise (<0.05% RMS [1 kHz–10 MHz]), and long-term continuous operation. Relative intensity noise and frequency noise of the generated signals are experimentally characterized.

Optics Letters•Apr 17, 2026•0 citations

Implementation of a stable, high-power optical lattice for quantum gas microscopy

A. Mazurenko, S. Blatt, F. Huber +5 more

We describe the design and implementation of a stable high-power 1064 nm laser system to generate optical lattices for experiments with ultracold quantum gases. The system is based on a low-noise laser amplified by an array of four heavily modified, high-power fiber amplifiers. The beam intensity is stabilized and controlled with a nonlinear feedback loop. Using real-time monitoring of the resulting optical lattice, we find the stability of the lattice site positions to be well below the lattice spacing over the course of hours. The position of the harmonic trap produced by the Gaussian envelope of the lattice beams is stable to about one lattice spacing and the long-term (six-month) relative root-mean-square stability of the lattice spacing itself is 0.5%.

arXiv:1806.08997•Review of Scientific Instruments•Mar 1, 2019•12 citations

Implementation of a stable, high-power optical lattice for quantum gas microscopy

Anton Mazurenko, Sebastian Blatt, Huber, F. +5 more

We describe the design and implementation of a stable high-power 1064 nm laser system to generate optical lattices for experiments with ultracold quantum gases. The system is based on a low-noise laser amplified by an array of four heavily modified, high-power fiber amplifiers. The beam intensity is stabilized and controlled with a nonlinear feedback loop. Using real-time monitoring of the resulting optical lattice, we find the stability of the lattice site positions to be well below the lattice spacing over the course of hours. The position of the harmonic trap produced by the Gaussian envelope of the lattice beams is stable to about one lattice spacing and the long-term (six-month) relative root-mean-square stability of the lattice spacing itself is 0.5%.

•Mar 1, 2019•10 citations

High-powered optical superlattice with robust phase stability for quantum gas microscopy

Meng-Da Li, Wan Lin, An Luo +6 more

Optical superlattice has a wide range of applications in the study of ultracold atom physics. Especially, it can be used to trap and manipulate thousands of atom pairs in parallel which constitutes a promising system for quantum simulation and quantum computation. In the present work, we report on a high-power optical superlattice formed by a 532-nm and 1064-nm dual-wavelength interferometer with a short lattice spacing of 630 nm. The short-term fluctuation (in 10 seconds) of the relative phase between the short lattice and the long lattice is measured to be 0.003π, which satisfies the needs for performing two-qubit gates among neighboring lattice sites. We further implement this superlattice in a 87Rb experiment with a quantum gas microscope of single-site resolution, where the high-power 532-nm laser is necessary for pinning atoms in the short lattice during imaging, providing a unique platform for engineering quantum states.

Optics Express•Apr 12, 2021•15 citations

Fiber laser-pumped Ti:sapphire laser with ultra-low-intensity noise and frequency stabilization for quantum precision measurement applications

Yingjie Ma, Yutong Wang, Xinxiu Zhou +2 more

We developed a fiber-laser-pumped Ti:sapphire laser system designed for quantum precision measurement applications. By employing a 35 W single-frequency 532 nm fiber laser as the pump source, the system delivered continuous-wave output powers of 4.12 W at 770.108 nm (D 1 line, K), 4.72 W at 780.244 nm (D 2 line, Rb), and 5.29 W at 794.982 nm (D 1 line, Rb), thereby fulfilling the requirements for optical pumping and probing of alkali atoms. To enhance frequency stability, saturated absorption spectroscopy was used to lock the laser frequency, resulting in frequency drifts below 1 MHz over two hours. Furthermore, since low-frequency intensity noise (DC-100 Hz) critically affects spin-relaxation-free quantum sensing, we carried out a theoretical analysis which identified the pump laser as the dominant noise source. By implementing feedback control to the pump source as well as an external noise suppression, both methods achieved over 30 dB of intensity noise suppression within the DC-4kHz frequency range. In addition, improved beam pointing stability further reduced noise below 3 Hz. These results collectively demonstrate the system’s strong potential for quantum sensing applications.

Optics Express•Aug 19, 2025•4 citations
Optical lattices for coherently manipulating ultracold atoms demand high-power, low-noise, narrow-line-width, and continuous-wave lasers. Here, we report the implementation of a 30 W 532 nm low-noise laser by second harmonic generation from a 1064 nm fiber laser, which is capable to generate optical lattices for a quantum gas microscope of Rb87 atoms. The overall conversion efficiency is 59% at an input power of 51 W with a lithium triborate crystal coupled to a ring cavity. The relative intensity noise of the output laser is suppressed to -120 dBc/Hz in the range of 10 Hz-100 kHz with a high dynamic range of over 50 dB, which is suitable for long-term trapping and coherent manipulation of the quantum gases.
Low-noise, high-power 532-nm lasers are of great interest in many scientific research studies, such as gravitational wave detection and ultracold atom experiments. In particular, in the experiments of quantum gas microscopy, a large power of laser is necessary during the imaging process, while low noise is important for preventing the atoms from being heated up. In this work, we report on the generation of such a 532-nm continuous-wave laser by coherently combining two laser beams produced by single-pass second-harmonic generation. The power of the combined laser is up to 17 W. With the help of intensity stabilization, we are able to suppress the relative intensity noise to below -120 dBc/Hz. The generated laser satisfies the experimental requirements for integrating optical superlattices with a quantum gas microscope.
We demonstrate the generation of 20.2 W of continuous-wave, low-intensity noise, single-frequency light at 840 nm, obtained via sum-frequency mixing of two high-power infrared fiber laser systems in an MgO-doped periodically poled lithium niobate (ppLN) crystal. Subsequent cavity-enhanced frequency doubling to 420 nm yields an output power of 15.2 W. Respective conversion efficiencies of 48% and 79% are achieved for the sum-frequency and second-harmonic stages, with good beam quality (M 2 < 1.3), low intensity noise (<0.05% RMS [1 kHz–10 MHz]), and long-term continuous operation. Relative intensity noise and frequency noise of the generated signals are experimentally characterized.
We describe the design and implementation of a stable high-power 1064 nm laser system to generate optical lattices for experiments with ultracold quantum gases. The system is based on a low-noise laser amplified by an array of four heavily modified, high-power fiber amplifiers. The beam intensity is stabilized and controlled with a nonlinear feedback loop. Using real-time monitoring of the resulting optical lattice, we find the stability of the lattice site positions to be well below the lattice spacing over the course of hours. The position of the harmonic trap produced by the Gaussian envelope of the lattice beams is stable to about one lattice spacing and the long-term (six-month) relative root-mean-square stability of the lattice spacing itself is 0.5%.
We describe the design and implementation of a stable high-power 1064 nm laser system to generate optical lattices for experiments with ultracold quantum gases. The system is based on a low-noise laser amplified by an array of four heavily modified, high-power fiber amplifiers. The beam intensity is stabilized and controlled with a nonlinear feedback loop. Using real-time monitoring of the resulting optical lattice, we find the stability of the lattice site positions to be well below the lattice spacing over the course of hours. The position of the harmonic trap produced by the Gaussian envelope of the lattice beams is stable to about one lattice spacing and the long-term (six-month) relative root-mean-square stability of the lattice spacing itself is 0.5%.
Optical superlattice has a wide range of applications in the study of ultracold atom physics. Especially, it can be used to trap and manipulate thousands of atom pairs in parallel which constitutes a promising system for quantum simulation and quantum computation. In the present work, we report on a high-power optical superlattice formed by a 532-nm and 1064-nm dual-wavelength interferometer with a short lattice spacing of 630 nm. The short-term fluctuation (in 10 seconds) of the relative phase between the short lattice and the long lattice is measured to be 0.003π, which satisfies the needs for performing two-qubit gates among neighboring lattice sites. We further implement this superlattice in a 87Rb experiment with a quantum gas microscope of single-site resolution, where the high-power 532-nm laser is necessary for pinning atoms in the short lattice during imaging, providing a unique platform for engineering quantum states.
We developed a fiber-laser-pumped Ti:sapphire laser system designed for quantum precision measurement applications. By employing a 35 W single-frequency 532 nm fiber laser as the pump source, the system delivered continuous-wave output powers of 4.12 W at 770.108 nm (D 1 line, K), 4.72 W at 780.244 nm (D 2 line, Rb), and 5.29 W at 794.982 nm (D 1 line, Rb), thereby fulfilling the requirements for optical pumping and probing of alkali atoms. To enhance frequency stability, saturated absorption spectroscopy was used to lock the laser frequency, resulting in frequency drifts below 1 MHz over two hours. Furthermore, since low-frequency intensity noise (DC-100 Hz) critically affects spin-relaxation-free quantum sensing, we carried out a theoretical analysis which identified the pump laser as the dominant noise source. By implementing feedback control to the pump source as well as an external noise suppression, both methods achieved over 30 dB of intensity noise suppression within the DC-4kHz frequency range. In addition, improved beam pointing stability further reduced noise below 3 Hz. These results collectively demonstrate the system’s strong potential for quantum sensing applications.