The belief propagation (BP) algorithm for polar codes has attracted significant attention due to its soft-output property and high parallelism. However, the BP algorithm is not comparable with the successive cancellation list (SCL) algorithm in terms of the error-correction performance. In this paper, we propose a high-stage BP flip (HSBPF) algorithm to further improve the error-correction performance of the BP algorithm by analyzing the distribution of log-likelihood ratio (LLR) values. Simulation results show that the decoding latency can be reduced by 30% with the proposed algorithm. Moreover, benefiting from the simplified message passing of the factor graph, the computational complexity of the proposed algorithm is also significantly reduced compared with the existing algorithms.
The belief propagation (BP) algorithm for polar codes has attracted significant attention due to its soft-output property and high parallelism. However, the BP algorithm is not comparable with the successive cancellation list (SCL) algorithm in terms of the error-correction performance. In this paper, we propose a high-stage BP flip (HSBPF) algorithm to further improve the error-correction performance of the BP algorithm by analyzing the distribution of log-likelihood ratio (LLR) values. Simulation results show that the decoding latency can be reduced by 30% with the proposed algorithm. Moreover, benefiting from the simplified message passing of the factor graph, the computational complexity of the proposed algorithm is also significantly reduced compared with the existing algorithms.
Due to the design principle of parallel processing, belief propagation (BP) decoding is attractive, and it provides good error-correction performance compared with successive cancellation (SC) decoding. However, its error-correction performance is still inferior to that of successive cancellation list (SCL) decoding. Consequently, this paper proposes a novel flip-list- (FL)-enabled belief propagation (BP) method to improve the error-correction performance of BP decoding for polar codes with low computational complexity. The proposed technique identifies the vulnerable channel log-likelihood ratio (LLR) that deteriorates the BP decoding result. The FL is utilized to efficiently identify the erroneous channel LLRs and correct them for the next BP decoding attempt. The preprocessed channel LLR through FL improves the error-correction performance with minimal flipping attempts and reduces the computational complexity. The proposed technique was compared with the state-of-the-art BP, i.e., BP bit-flip (BP-BF), generalized BP-flip (GBPF), cyclic redundancy check (CRC)-aided (CA-SCL) decoding, and ordered statistic decoding (OSD), algorithms. Simulation results showed that the FL-BP had an excellent block error rate (BLER) performance gain up to 0.7 dB compared with BP, BP-BF, and GBPF decoder. Besides, the computational complexity was reduced considerably in the high signal-to-noise ratio (SNR) regime compared with the BP-BF and GBPF decoding methods.
Belief propagation (BP) has attracted increasing attention due to its high parallelism. In this letter, a correction method is proposed to improve the block error rate (BLER) performance of the BP decoder for polar codes so that it is comparable to that of the successive cancellation list (SCL) decoder. Compared with BP flipping (BPF) decoding, the proposed decoder focuses on prior knowledge of the code bits in the factor graph. Two strategies have been proposed to construct the correction set. The simulation results show that the BPC decoder exhibits a BLER similar to that of BPF decoder while reducing the average latency and complexity by half. In addition, the BLER of the BPC decoder can approach that of the cyclic redundancy check (CRC)-aided SCL (CA-SCL) decoder in regions with low and medium signal-to-noise ratios (SNRs).
Bit flipping was first used to improve the decoding performance of successive cancellation (SC) decoder. Since SC decoding process is serial, so the first bit that goes wrong in the decoding process will cause several subsequent bits to go wrong, which will suffer from higher decoding delay than belief propagation (BP) parallel decoding. In order to meet the performance of 5G low latency and high reliability, BP decoding algorithm have received a lot of attention. However, at medium and high signal-to-noise ratios (SNR), BP decoding does not perform as well as the SC list (SCL) decoding algorithm. Hence, BP decoding algorithm borrows bit-flip strategies from SC bit flip (SCF) decoder to improve the performance. The performance of BP bit flip (BPF) decoding depends on whether the construction of the flip set is correct, so this letter proposes a flip set construction approach based on the standard deviation of the log-likelihood ratio (LLR) and the reliability weight of polarized channels, which is comparable to the existing BPF decoding, the improved algorithm can identify the error-prone bits more efficiently and improve the decoding performance.
Belief propagation (BP) decoding for polar codes has been extensively studied because of its inherent parallelism. However, its performance remains inferior to that of successive cancellation list decoding (SCL) due to the structure of the decoding graph. To improve the block error rate (BLER) performance, the BP correction (BPC) decoding, a post-processing scheme that corrects prior knowledge of the identified code bit, improves convergence by executing additional iterations on the failed BP decoder. Moreover, the BPC decoder demonstrates a better decoding performance than the BP-based bit-flipping decoder. Nevertheless, the additional decoding attempts lead to increased latency. In this article, a modified BPC decoder is proposed to reduce the number of decoding attempts by redefining the correction rules. A new metric is designed to effectively identify the corrected location. Numerical results show that the proposed modified BPC decoder achieves a slight improvement in BLER compared with the original BPC, with a dramatic reduction in average complexity. Furthermore, a higher-order version, named MBPC-Ω, is extended to further improve the performance, where the Ω is the maximum correction order. Numerical results show that the higher-order modified BPC achieves a similar BLER performance to existing multiple bit-flipping BP decoders but has around half the latency overhead. In addition, the proposed MBPC-2 decoder performs better than the cyclic redundancy check-aided SCL (CA-SCL) decoder with list size 4 and is slightly worse than the CA-SCL with list size 8 in high signal-to-noise ratio (SNR) regions but with significant decoding latency reduction.
Recently, belief propagation list (BPL) decoding has been proposed to achieve the excellent parallel decoding performance of polar codes with high throughput and low latency. However, the performance gap between BPL decoding and state-of-the-art successive cancellation list (SCL) decoding is still significant at practical SNRs. In this letter, we propose an efficient BPL flip (EBPLF) decoding algorithm for filling this gap. Firstly, an efficient bit-flipping strategy under BPL decoding is proposed to allow multiple bits being flipped more efficiently than the existing bit-flipping strategy. Then, by exploiting the decoding diversity and reliability of each bit over the multiple factor graphs within BPL decoding, an enhanced flip set is constructed to identify the error-prone patterns in an efficient way. Extensive simulation results show that EBPLF decoding outperforms the existing BPLF scheme and approaches the performance of adaptive SCL decoding at practical SNRs with much lower average latency.
Polar codes have become the channel coding scheme for control channel of enhanced mobile broadband in the 5G communication systems. Belief propagation (BP) decoding of polar codes has advantages of low decoding latency and high parallelism but achieves worse bit error ratio (BER) performance compared with the successive cancellation list (SCL) decoding scheme. In this paper, an improved BP list (IBPL) decoding algorithm is proposed with comparable BER performance to SCL algoritm. Firstly, the optimal permuted factor graph is analyzed for polar codes, which improves the performance of the BP decoder without path extension. Furthermore, based on the optimal graph, the bit metric and decoding path metric are proposed to extend and prune the decoding path. The proposed IBPL decoder is focused on not only the permutation of polar codes but also the reliabilities of decoded codewords during each iteration of BP decoding, which has a more accurate decoding path list. The simulation results show that the proposed IBPL decoder improves the BER performance compared with the original BP decoder significantly, and can approach the performance of the SCL decoder at low signal to noise ratio regions.