In chip-based quantum key distribution (QKD) systems, the non-ideal quantum state preparation due to the imperfect electro-optic phase modulators (EOPM) decreases the secret key rate and introduces potential vulnerabilities. We propose and implement an on-chip transmittance-invariant phase modulator (TIPM) to solve this problem. Simulated and experimental results show that TIPM can eliminate the correlation between phase, intensity, and polarization of quantum states caused by phase-dependent loss. The design can tolerate a significant fabrication mismatch and is universal to multi-material platforms. Furthermore, TIPM increases the modulation depth achievable by EOPMs in standard process design kit (PDK). The proposal of TIPM can improve the practical security and performance of the chip-based QKD systems.
In chip-based quantum key distribution (QKD) systems, the non-ideal quantum state preparation due to the imperfect electro-optic phase modulators (EOPM) decreases the secret key rate and introduces potential vulnerabilities. We propose and implement an on-chip transmittance-invariant phase modulator (TIPM) to solve this problem. Simulated and experimental results show that TIPM can eliminate the correlation between phase, intensity, and polarization of quantum states caused by phase-dependent loss. The design can tolerate a significant fabrication mismatch and is universal to multi-material platforms. Furthermore, TIPM increases the modulation depth achievable by EOPMs in standard process design kit (PDK). The proposal of TIPM can improve the practical security and performance of the chip-based QKD systems.
Quantum key distribution (QKD) is a technology that allows two users to communicate with theoretically perfect security using standard optical fibres. This is possible by transmitting the key on single photons, meaning a measurement by an eavesdropper disturbs the system in a way observable to the legitimate parties. The technology has advanced since the first protocol proposed in 1984, to the stage where there are now many protocols that can be experimentally implemented. These protocols have allowed secure keys to be generated over distances greater than 400 km and with secure key rates over 10 Mbit/s. In a metropolitan QKD network, it would be desirable for as many users to be connected as possible. Unfortunately, each protocol comes with different requirements on the transmitter and receiver. Even within a single protocol, different clock rates can require individualised transmitter and receiver hardware. This prohibits users from communicating with all receivers, unless they have complex transmitters with hardware for many protocols. This thesis develops a transmitter for practical QKD that is able to adapt to a number of different protocols with no changes to the hardware. The transmitter works using optical injection locking, where a pulse preparation laser adopts the phase of a phase preparation laser. Controlling the phase and intensity of the pulses in this way removes the side channel ordinarily present with direct modulation, in that the phase, intensity and frequency simultaneously change in response to an applied current. The cavity-enhanced electro-optic effect allows for the first demonstration of sub-volt half-wave phase modulation at high clock rates. The transmitter successfully demonstrates phase encoding, intensity encoding and on-demand phase randomisation. This allows for the experimental realisation and direct comparison of different QKD protocols, including one that has never before been implemented due to experimental complexity. A stable intensity modulator is also developed, based on a Sagnac interferometer. This removes a side channel in QKD systems and integrates well with the directly-modulated quantum transmitter. This development also means that the transmitter can implement all current two-party QKD protocols based on weak coherent pulses. The transmitter has the potential to become the standard transmitter for future quantum communication networks due to its stability, versatility and power efficiency. The design could also be demonstrated on a photonic chip, making it compact enough to fit in small transmitter units.
Quantum key distribution (QKD) is a method that enables two parties separated by distance to share a secret data string. QKD is based on the principles of quantum mechanics and offers information-theoretical security, making it a strong contender for the next generation of cryptography. However, the use of imperfect devices can lead to vulnerabilities and potential quantum hacking schemes. It is crucial to address these imperfections and restore the security of QKD, especially for individuals who use realistic devices for secure communication. QKD can be categorized into two types based on key encoding methods: discrete-variable (DV) QKD and continuous-variable (CV) QKD. It can also be classified based on the transmission medium: fiber-based QKD, free-space-based QKD, and chip-based QKD. This thesis focuses on chip-based DVQKD and fiber-based CVQKD. In the first part, we study the chip-based DVQKD system in the presence of phase-and polarization-dependent loss. We develop innovative methods to restore the security and improve the key rate. The solution is practical, requiring no hardware modifications, and has been adopted by other groups. The second part focuses on fiber-based CVQKD systems that use intensity fluctuating sources. We establish the security by incorporating the concept from DVQKD. Our proposed techniques are practical and do not require any hardware adjustments for existing CVQKD systems. Lastly, we present a general framework for passive CVQKD. Our proposed passive protocol offers a one-time solution to eliminate all potential side channels or imperfections in the source. Interestingly, we discover that the passive source is an excellent choice for the discrete-modulated CVQKD protocol, since the passive protocol offers the same key rate as its active counterpart, while removing all modulator side channels that have plagued the active ones. To sum up, this thesis introduces novel techniques and practical solutions to address imperfections in source devices in different QKD systems. We also propose a passive protocol that can handle all loopholes in source devices in a one-time process. We anticipate that this thesis will facilitate significant advancements in chip-based and fiber-based QKD implementations in the future.
Quantum key distribution (QKD) allows secret key exchange between two users with unconditional security. For QKD to be widely deployed, low cost and compactness are crucial requirements alongside high performance. Currently, the majority of QKD systems demonstrated rely on bulk intensity and phase modulators to generate optical pulses with precisely defined amplitude and relative phase difference—i.e., to encode information as signal states and decoy states. However, these modulators are expensive and bulky, thereby limiting the compactness of QKD systems. Here, we present and experimentally demonstrate a novel optical transmitter design to overcome this disadvantage by generating intensity- and phase-tunable pulses at GHz clock speeds. Our design removes the need for bulk modulators by employing directly modulated lasers in combination with optical injection locking and coherent interference. This scheme is, therefore, well suited to miniaturization and photonic integration, and we implement a proof-of-principle QKD demonstration to highlight potential applications.
Abstract Quantum key distribution (QKD) has convincingly been proven compatible with real life applications. Its wide-scale deployment in optical networks will benefit from an optical platform that allows miniature devices capable of encoding the necessarily complex signals at high rates and with low power consumption. While photonic integration is the ideal route toward miniaturisation, an efficient route to high-speed encoding of the quantum phase states on chip is still missing. Consequently, current devices rely on bulky and high power demanding phase modulation elements which hinder the sought-after scalability and energy efficiency. Here we exploit a novel approach to high-speed phase encoding and demonstrate a compact, scalable and power efficient integrated quantum transmitter. We encode cryptographic keys on-demand in high repetition rate pulse streams using injection-locking with deterministic phase control at the seed laser. We demonstrate record secure-key-rates under multi-protocol operation. Our modulator-free transmitters enable the development of high-bit rate quantum communications devices, which will be essential for the practical integration of quantum key distribution in high connectivity networks.
Silicon photonics holds the promise of the miniaturization of quantum communication devices. Recently, silicon chip optical transmitters for quantum key distribution (QKD) have been built and demonstrated experimentally. Nonetheless, these silicon chips suffer substantial phase- and polarization-dependent loss (PDL) which, if unchecked, could compromise the security of QKD systems due to overestimation of the secret key rate. Here, first, we restore the security by regarding single photons without phase and polarization dependence as untagged and secure qubits. Next, by using a postselection technique, we implement a secure QKD protocol that provides a high key generation rate even in the presence of severe phase- and polarization-dependent loss. Our solution is simple to realize in a practical experiment, as it does not require any hardware modification.
Quantum Key Distribution (QKD) has garnered significant attention due to its unconditional security based on the fundamental principles of quantum mechanics. While QKD has been demonstrated by various groups and commercial QKD products are available, the development of a fully chip-based QKD system, aimed at reducing costs, size, and power consumption, remains a significant technological challenge. Most researchers focus on the optical aspects, leaving the integration of the electronic components largely unexplored. In this paper, we present the design of a fully integrated electrical control chip for QKD applications. The chip, fabricated using 28 nm CMOS technology, comprises five main modules: an ARM processor for digital signal processing, delay cells for timing synchronization, ADC for sampling analog signals from monitors, OPAMP for signal amplification, and DAC for generating the required voltage for phase or intensity modulators. According to the simulations, the minimum delay is 11ps, the open-loop gain of the operational amplifier is 86.2 dB, the sampling rate of the ADC reaches 50 MHz, and the DAC achieves a high rate of 100 MHz. To the best of our knowledge, this marks the first design and evaluation of a fully integrated driver chip for QKD, holding the potential to significantly enhance QKD system performance. Thus, we believe our work could inspire future investigations toward the development of more efficient and reliable QKD systems.