Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Sensors Journal

Quantum-Enhanced Fiber Curvature Sensor Exploiting Intensity-Correlated Pulse Twin Beams

Hailong Wang, Zhihao Ni, Jun Chen, Yan Chao Shi, Shangzhong Jin, Yajuan Zhang, Chunliu Zhao

Published Apr 28, 2022• 9 citations
Publisher

Abstract

A quantum-enhanced fiber curvature sensor based on single-mode fiber (SMF) taper exploiting intensity-correlated pulse twin beams has been proposed and experimentally realized. The curvature can be measured by intensity difference noise power and degree of intensity difference squeezing which are tailored by the bending-induced loss of one beam’s SMF taper. In addition, the three different waist diameters of SMF tapers, i. e.,$52.12~ \boldsymbol {\mu }\text{m}$,$61.68~ \boldsymbol {\mu }\text{m}$, and 67.54$\boldsymbol {\mu }\text{m}$respectively have been prepared using a fusion splicer. Finally, the maximum measured sensitivity enhancement of 4.42 dB/m−1and signal-to-noise ratio enhancement of 2.0 dB have been experimentally implemented through intensity difference measurement technique compared with the corresponding classical counterpart (double-channel light source). In contrast to other curvature sensors, this proposal has the advantages of high sensitivity, ease of fabrication, simple structure, and low cost.

DOI
10.1109/jsen.2022.3170907

Related papers

Quantum-Enhanced Signal-to-Noise Ratio Fiber Bending Sensor Utilizing Intensity Correlated Pulse Twin Beams

Hailong Wang, Qiong Fan, Chunliu Zhao +5 more

We have experimentally proposed and implemented a fiber bending sensor with quantum-enhanced signal-to-noise ratio (SNR), which stems from the combination of single-mode fiber (SMF) taper and intensity correlated pulse twin beams. One beam from pulse twin beams is coupled into the SMF taper to obtain a bending-induced loss, while the other beam is also attenuated correspondingly by a variable optical attenuator to ensure maximum noise cancellation. Along this line, intensity-difference noise power between pulse twin beams is always reduced below standard quantum limit (SQL), and thus a higher SNR value compared with the corresponding double-channel light source can be realized. In this work, the three different SMF tapers with the waist diameters of$85.1~\mu \text{m}$,$74.9~\mu \text{m}$, and$67.3~\mu \text{m}$, respectively have been prepared by a fusion splicer. The experimental results show that in the bending range of 0–20 m−1, the SMF taper with$67.3~\mu \text{m}$waist diameter shows the highest sensitivity of 0.105 dB/m−1, the resolution of 0.095 m−1, and its SNR value is enhanced by a maximal factor of 2.84 dB compared with the corresponding classical counterpart. The present bending proposal may find potential applications in monitoring the bending deformation of building structure, roadbed settlement, medical and health, etc.

IEEE Sensors Journal•Dec 15, 2021•10 citations

Quantum-Enhanced Strain and Curvature Sensing Based on a Birefringent Fiber Sagnac Interferometer

Hailong Wang, Zehua Chen, Siyuan Ma +4 more

In this work, the combination of an all-fiber two-mode squeezed state light source and Sagnac interferometer for the experimental realization of a quantum-enhanced strain and curvature sensor is presented here. The former can offer intensity-correlated twin beams, whose intensity difference noise is beyond standard quantum limit. The latter can be prepared by splicing a polarization-maintaining fiber between two standard single-mode fibers. Using the intensity interrogation method tracing the intensity variation of the sensing signal beam, we can obtain the following quantum-enhanced experimental results. In the strain sensing, signal-to-noise ratio (SNR) is enhanced by a maximal factor of 1.54 dB compared with the corresponding classical strategy under balanced measurement condition. Under unbalanced measurement condition, SNR and the sensitivity are enhanced by the maximal factors of 1.39 dB and 0.026 dB/μϵ respectively compared with the corresponding classical counterpart. In the curvature sensing, balanced measurement condition can offer a maximal factor of 1.31 dB SNR enhancement, unbalanced measurement condition will bring the maximal factors of 1.36 dB and 3.31 dB/m−1respectively enhancement in SNR and sensitivity. These results demonstrate the feasibility of the combination of all-fiber non-classical light source and various fiber-based structures as the strain and curvature sensors for many applications that demands sub-poissonian precise measurements.

Journal of Lightwave Technology•Sep 23, 2024•9 citations

Quantum-Enhanced Strain and Temperature Sensing Based on Self-Imaging Principle in a Single-Multi-Single-Mode Fiber Structure

Dongxu Wang, Zihao Liu, Hailong Wang +3 more

To overcome the precision limitation imposed by classical common noise and standard quantum limit (SQL) in traditional classical sensing, a single-multi-single-mode (SMS) fiber optic sensor based on the combination of self-imaging principle and two-mode squeezed light source is proposed and experimentally demonstrated. The SMS sensor is constructed by fusing a multi-mode fiber in between two single-mode fiber segments. By utilizing an intensity-correlated twin beam source (signal and idler), the signal beam acts as the sensing probe interacting with the SMS sensor, while the idler beam serves as a reference to implement balanced differential measurement. The experimental results explicitly demonstrate a maximum signal-to-noise ratio enhancement of 1.196±0.012 dB and 1.194±0.019 dB for strain sensing (0 με to 2077.9 με) and temperature sensing (30°C to 110°C), respectively. These findings confirm the sensor's capability for real-time, high-precision sub-Poissonian measurements, particularly for practical applications in electromagnetic-immune and the requirements of simultaneous discrimination of temperature and strain.

IEEE Transactions on Instrumentation and Measurement•Jan 1, 2026•0 citations

Talbot Effect-Assisted Strain Sensing Based on Intensity Correlated Twin Beams in a Sandwich Fiber Structure

Dongxu Wang, Hailong Wang, Tenghui Mao +2 more

In this work, a sandwich fiber structure based on the combination of Talbot effect and intensity correlated twin beams has been theoretically proposed and experimentally demonstrated. The twin beams are composed of signal and idler beams. In this sense, signal beam is acted as the sensing role to interact with this sandwich fiber structure, and idler beam is regard as a reference role to implement balanced differential measurement for eliminating classical common noise and beating standard quantum limit (SQL). Comparing with SQL, the present experimental results affirm that the maximum signal-to-noise ratio enhancement of 1.196 dB in the strain sensing (0 με to 2077.9 με).

Photonics Global Conference•Dec 5, 2025•0 citations

The Effect of Length and Curvature on Quantum-Enhanced Temperature Sensing in a Fiber-Based Sagnac Loop

Hailong Wang, Zehua Chen, Tenghui Mao +4 more

In this work, we theoretically proposed and experimentally demonstrated the enhanced effect of prior curvature precondition on temperature sensing in a quantum-enhanced sensing system, which is constructed by combining an all-fiber two-mode squeezed light source and a Sagnac loop. By choosing the prior optimum length and curvature of polarization-maintaining fiber inside the Sagnac loop, both signal-to-noise ratio (SNR) and sensitivity can be effectively enhanced. The experimental results are summarized as follows. SNR is enhanced by the factor of 0.38 dB under balanced measurement condition. Under unbalanced measurement condition, the enhanced factors with regard to sensing depth are 0.22 and 2.34 dB for the classical double-channel light source and two-mode squeezed light source, respectively. With the support of curvature precondition, the sensing depth of the former one 15.62 dB is enhanced to 31.49 dB of the latter one by an enhanced factor of 15.87 dB, which is larger than 13.75 dB in the absence of curvature precondition, this enhanced effect still exists in the temperature sensitivity (0.982 dB/°C <1.134 dB/°C) and SNR (0.54 dB <1.7 dB). These results confirm the potential prospects of using the cross effects from other physical quantities to enhance temperature sensing in a quantum-enhanced sensing system.

IEEE Sensors Journal•Feb 26, 2025•4 citations

An all-fiber source of pulsed twin beams for quantum communication

Xueshi Guo, Xiaoying Li, Nannan Liu +2 more

Motivated by the pursuit of a simple system to produce a continuous variable non-classical light source for long-distance quantum communication, we construct an all-fiber source of pulsed twin beams in the 1550 nm band by using a high gain fiber optical parametric amplifier. The intensity-difference noise of the twin beams is below the shot noise limit by 3.1 dB (10.4 dB after correction for losses). A detailed study reveals a number of limiting factors for noise reduction. Therefore, further noise reduction will be feasible once care is taken for these limiting factors.

arXiv:1208.4971•Applied Physics Letters•Dec 24, 2012•31 citations
A quantum-enhanced fiber curvature sensor based on single-mode fiber (SMF) taper exploiting intensity-correlated pulse twin beams has been proposed and experimentally realized. The curvature can be measured by intensity difference noise power and degree of intensity difference squeezing which are tailored by the bending-induced loss of one beam’s SMF taper. In addition, the three different waist diameters of SMF tapers, i. e.,52.12 μm52.12~ \boldsymbol {\mu }\text{m}52.12 μm,61.68 μm61.68~ \boldsymbol {\mu }\text{m}61.68 μm, and 67.54μm\boldsymbol {\mu }\text{m}μmrespectively have been prepared using a fusion splicer. Finally, the maximum measured sensitivity enhancement of 4.42 dB/m−1and signal-to-noise ratio enhancement of 2.0 dB have been experimentally implemented through intensity difference measurement technique compared with the corresponding classical counterpart (double-channel light source). In contrast to other curvature sensors, this proposal has the advantages of high sensitivity, ease of fabrication, simple structure, and low cost.
We have experimentally proposed and implemented a fiber bending sensor with quantum-enhanced signal-to-noise ratio (SNR), which stems from the combination of single-mode fiber (SMF) taper and intensity correlated pulse twin beams. One beam from pulse twin beams is coupled into the SMF taper to obtain a bending-induced loss, while the other beam is also attenuated correspondingly by a variable optical attenuator to ensure maximum noise cancellation. Along this line, intensity-difference noise power between pulse twin beams is always reduced below standard quantum limit (SQL), and thus a higher SNR value compared with the corresponding double-channel light source can be realized. In this work, the three different SMF tapers with the waist diameters of85.1 μm85.1~\mu \text{m}85.1 μm,74.9 μm74.9~\mu \text{m}74.9 μm, and67.3 μm67.3~\mu \text{m}67.3 μm, respectively have been prepared by a fusion splicer. The experimental results show that in the bending range of 0–20 m−1, the SMF taper with67.3 μm67.3~\mu \text{m}67.3 μmwaist diameter shows the highest sensitivity of 0.105 dB/m−1, the resolution of 0.095 m−1, and its SNR value is enhanced by a maximal factor of 2.84 dB compared with the corresponding classical counterpart. The present bending proposal may find potential applications in monitoring the bending deformation of building structure, roadbed settlement, medical and health, etc.
In this work, the combination of an all-fiber two-mode squeezed state light source and Sagnac interferometer for the experimental realization of a quantum-enhanced strain and curvature sensor is presented here. The former can offer intensity-correlated twin beams, whose intensity difference noise is beyond standard quantum limit. The latter can be prepared by splicing a polarization-maintaining fiber between two standard single-mode fibers. Using the intensity interrogation method tracing the intensity variation of the sensing signal beam, we can obtain the following quantum-enhanced experimental results. In the strain sensing, signal-to-noise ratio (SNR) is enhanced by a maximal factor of 1.54 dB compared with the corresponding classical strategy under balanced measurement condition. Under unbalanced measurement condition, SNR and the sensitivity are enhanced by the maximal factors of 1.39 dB and 0.026 dB/μϵ respectively compared with the corresponding classical counterpart. In the curvature sensing, balanced measurement condition can offer a maximal factor of 1.31 dB SNR enhancement, unbalanced measurement condition will bring the maximal factors of 1.36 dB and 3.31 dB/m−1respectively enhancement in SNR and sensitivity. These results demonstrate the feasibility of the combination of all-fiber non-classical light source and various fiber-based structures as the strain and curvature sensors for many applications that demands sub-poissonian precise measurements.
To overcome the precision limitation imposed by classical common noise and standard quantum limit (SQL) in traditional classical sensing, a single-multi-single-mode (SMS) fiber optic sensor based on the combination of self-imaging principle and two-mode squeezed light source is proposed and experimentally demonstrated. The SMS sensor is constructed by fusing a multi-mode fiber in between two single-mode fiber segments. By utilizing an intensity-correlated twin beam source (signal and idler), the signal beam acts as the sensing probe interacting with the SMS sensor, while the idler beam serves as a reference to implement balanced differential measurement. The experimental results explicitly demonstrate a maximum signal-to-noise ratio enhancement of 1.196±0.012 dB and 1.194±0.019 dB for strain sensing (0 με to 2077.9 με) and temperature sensing (30°C to 110°C), respectively. These findings confirm the sensor's capability for real-time, high-precision sub-Poissonian measurements, particularly for practical applications in electromagnetic-immune and the requirements of simultaneous discrimination of temperature and strain.
In this work, a sandwich fiber structure based on the combination of Talbot effect and intensity correlated twin beams has been theoretically proposed and experimentally demonstrated. The twin beams are composed of signal and idler beams. In this sense, signal beam is acted as the sensing role to interact with this sandwich fiber structure, and idler beam is regard as a reference role to implement balanced differential measurement for eliminating classical common noise and beating standard quantum limit (SQL). Comparing with SQL, the present experimental results affirm that the maximum signal-to-noise ratio enhancement of 1.196 dB in the strain sensing (0 με to 2077.9 με).
In this work, we theoretically proposed and experimentally demonstrated the enhanced effect of prior curvature precondition on temperature sensing in a quantum-enhanced sensing system, which is constructed by combining an all-fiber two-mode squeezed light source and a Sagnac loop. By choosing the prior optimum length and curvature of polarization-maintaining fiber inside the Sagnac loop, both signal-to-noise ratio (SNR) and sensitivity can be effectively enhanced. The experimental results are summarized as follows. SNR is enhanced by the factor of 0.38 dB under balanced measurement condition. Under unbalanced measurement condition, the enhanced factors with regard to sensing depth are 0.22 and 2.34 dB for the classical double-channel light source and two-mode squeezed light source, respectively. With the support of curvature precondition, the sensing depth of the former one 15.62 dB is enhanced to 31.49 dB of the latter one by an enhanced factor of 15.87 dB, which is larger than 13.75 dB in the absence of curvature precondition, this enhanced effect still exists in the temperature sensitivity (0.982 dB/°C <1.134 dB/°C) and SNR (0.54 dB <1.7 dB). These results confirm the potential prospects of using the cross effects from other physical quantities to enhance temperature sensing in a quantum-enhanced sensing system.
Motivated by the pursuit of a simple system to produce a continuous variable non-classical light source for long-distance quantum communication, we construct an all-fiber source of pulsed twin beams in the 1550 nm band by using a high gain fiber optical parametric amplifier. The intensity-difference noise of the twin beams is below the shot noise limit by 3.1 dB (10.4 dB after correction for losses). A detailed study reveals a number of limiting factors for noise reduction. Therefore, further noise reduction will be feasible once care is taken for these limiting factors.