Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Microwave and Wireless Components Letters

A 230-GHz Endfire SIS Mixer With Near Quantum-Limited Performance

John Garrett, Boon-Kok Tan, Christine Chaumont, Faouzi M. Boussaha, G. Yassin

Published Jul 20, 2022• 8 citations
Publisher

Abstract

In this letter, we report the near quantum-limited performance of a 230 GHz endfire superconductor-insulator-superconductor (SIS) mixer utilizing a Nb/Al-AlOx/Nb trilayer. An important feature of this mixer is its use of a unilateral finline for the waveguide-to-planar circuit transition, which allows for a wide radiofrequency (RF) bandwidth, a simple waveguide structure with easy alignment, and for the mixer chip to be aligned along the optical axis. Each of these factors is beneficial in the construction of large-format focal plane arrays. We tested the new finline mixer from 210 to 260 GHz in a liquid helium cryostat at ~4 K. The best recorded noise temperature was approximately twice the quantum limit, which is comparable to conventional radial probe mixers. This suggests that endfire SIS mixers can be used in large format arrays, comprising 100s or even 1000s of SIS mixing elements, while retaining state-of-the-art quantum mixing performance.

DOI
10.1109/lmwc.2022.3190701

Related papers

An End-Fire SIS Mixer with Near Quantum-Limited Performance

John Garrett

In this letter, we report the near quantum-limited performance of an end-fire millimetre-wavelength superconductor-insulator-superconductor (SIS) mixer. An important feature of this mixer is its use of a unilateral finline as the input antenna, which allows for a wide RF bandwidth, a simple waveguide structure with easy alignment and for the mixer chip to be aligned along the optical axis. Each of these factors is beneficial in the construction of large-format focal plane arrays. We tested the new finline mixer from 210 to 260 GHz and the best recorded noise temperature was approximately twice the quantum limit, which is comparable to conventional radial probe mixers. This suggests that end-fire SIS mixers can be used in large-format arrays, comprising of 100s or even 1000s of SIS mixing elements, while retaining state-of-the-art quantum mixing performance.

•Apr 28, 2022•0 citations

Development of 230 GHz finline SIS mixers for next-generation large array receivers and HARP instrument upgrade

Kuan‐Yu Liu, Boon-Kok Tan, Ming-Jye Wang +28 more

In pursuit of advancing large array receiver capabilities and enhancing the 16-element Heterodyne Array Receiver Program (HARP) instrument on the James Clerk Maxwell Telescope (JCMT), we have successfully fabricated 230 GHz finline superconductor-insulator-superconductor (SIS) mixers. These mixers are critical for assessing the potential and prospective for the HARP instrument’s upgrade. Unlike the existing HARP’s mixer, we replace the probe antenna with an end-fire unilateral finline as the waveguide to planar circuit transition. This mixer design is expected to operate from about 160–260 GHz (approximately 47% bandwidth), and the mixer chips’ current-voltage (I-V) curves have been characterized, showing promising results with a quality factor (Rsg/Rn) exceeding 9.3. Evaluation of the double-sideband (DSB) receiver noise temperature (Trx) is currently underway. Once successfully characterised, our immediate aim is to scale the mixer to operate at HARP’s frequency range near 345 GHz to achieve similar broad RF bandwidth performance. Ongoing simulations are currently being conducted for the design of the 345 GHz finline mixer. This work marks a crucial step toward enhancing HARP receiver performance with better sensitivity and wider Intermediate Frequency (IF) bandwidth, enabling higher-frequency observations, and expanding the scientific potential of the JCMT and its collaborative partners.

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI•Jun 14, 2024•0 citations

A millimeter unilateral finline SIS mixer with a wide IF bandwidth

Yangjun Zhou

Superconductor-Insulator-Superconductor (SIS) tunnel junction mixers are now commonly used in as- tronomical receivers at (sub)millimeter wavelengths because of their superb sensitivity, high dynamic range and stability of operation. Niobium SIS mixers operating at frequencies well below the super- conducting gap (∼680 GHz) have already achieved quantum limited sensitivity. Therefore to further enhance the receiver sensitivity, increasing the Intermediate Frequency (IF) bandwidth of SIS mixers has became crucial. This thesis focuses on the theoretical modeling, design and experimental verifi- cation of Nb SIS mixers operating around 230 GHz with a wide IF bandwidth of 1–15 GHz. These mixers were designed for a single baseline heterodyne interferometer (GUBBINS), which is being built to observe the Sunyaev-Zel’dovich effect in the Cosmic Microwave Background. The combination of wide IF bandwidth SIS mixers and complex analogue correlators will allow GUBBINS to feature high surface brightness sensitivity, that helps to distinguish the weak SZ effect from the background noise. The SIS mixer detector system was assembled inside the GUBBINS cryostat together with the IF electronics and RF/LO optical systems. Low noise temperatures of around 71 K were then measured in the GUBBINS system. The Nb SIS mixer we have developed uses a unilateral finline and fully integrated planar circuits deposited on a silicon substrate, to couple the electromagnetic radiation from the waveguide into the SIS junction. The finline mixer allows a broad-band RF coupling, an easy integration of the on-chip planar circuits and an easy-to-fabricate mixer block. To achieve a wide IF bandwidth, the output impedance of the SIS mixer was well matched to the input impedance of the amplifier by a multi-stage microstrip circuit. Additionally, the planar circuit of the SIS mixer was also designed to have a small lumped inductance and capacitance. The SIS mixer chip was extensively simulated by rigorous electromagnetic software (HFSS) and the S-parameter was exported to a quantum mixing package SuperMix to produce a full-wave model of the mixer. Experimental testing yielded a best noise temperature of 50 K with an average noise temperature of 75 K over an RF bandwidth of 160 GHz– 260 GHz. We have performed thorough experimental and computational investigation of the IF system in particular the constraints on the bandwidth caused by the lumped element capacitance of the mixer chip and the matching of the output impedance of the mixer to the IF amplifier. Our conclusion is that a bandwidth of 1–15 GHz could be achieved using our mixer design, subject to the performance of the amplifier. Finally, a variable temperature load system was successfully developed and tested inside the cryostat, to avoid the losses from the room-temperature optics. We have showed that the noise temperature of the SIS detector could be reduced by as much as 15 K by testing the mixer using a variable temperature load inside the cryostat.

•Jan 1, 2013•0 citations

A planar quasi-optical SIS receiver

P. A. Stimson, Robert J. Dengler, Henry George LeDuc +2 more

A planar, quasi-optical SIS (superconductor-insulator-superconductor) receiver operating at 230 GHz is described. The receiver consists of a 2*5 array of half-wave dipole antennas with niobium-aluminum oxide-niobium SIS junctions on a quartz dielectric-filled parabola. The 1.4-GHz intermediate frequency is coupled from the mixer via coplanar strip transmission lines and 4:1 balun transformers. The receiver is operated at 4.2 K in a liquid helium immersion cryostat. Accurate measurements of the performance of single untuned array receiver elements are reported. A mixer noise temperature of 89 K DSB (double sideband), receiver noise temperature of 156 K DSB and conversion loss of 8 dB into a matched load have been obtained. This mixer noise temperature is approximately a factor of two larger than that of current state of the art waveguide mixers using untuned single junctions a the same frequency.>

IEEE Transactions on Microwave Theory and Techniques•Apr 1, 1993•15 citations

Wide If 230-GHz Superconductor-Insulator-Superconductor Mixer

Naeun Shin, Jung‐Won Lee, Ming-Jye Wang

A 230 GHz Superconductor-Insulator-Superconductor (SIS) mixer is designed focusing on a good performance in the IF frequency range of 4–16 GHz over the RF band from 211 to 275 GHz. A transition from a full-height waveguide to a probe is designed using HFSS. The mixer chips containing SIS junctions are designed and optimized to have low total capacitance of circuits to ensure wide IF bandwidth. The chip fabrication was done in Academia Sinica Institute of Astronomy and Astrophysics (ASIAA), where the masks were conducted by TSMC. A lab test was conducted on a superconducting mixer with a cryogenic dewar. The gap voltage in the I-V curve of the mixer is approximately 8 mV, and there is a clear nonlinearity around a current of 110 μA, which matches well with the simulation. The receiver noise temperature is approximately 60 K including optical losses and the noise from the RF input.

International Conference on Information and Communication Technology Convergence (ICTC)•Oct 16, 2024•1 citation

A 650 GHz Unilateral Finline SIS Mixer Fed by a Multiple Flare-Angle Smooth-Walled Horn

Boon-Kok Tan, G. Yassin, Paul Grimes +3 more

We report the design and successful operation of an superconductor-insulator-superconductor (SIS) mixer operating near the superconducting gap of niobium. A key feature of this design is the employment of a unilateral finline taper to transform the waveguide modes to microstrip signals. This transition is easy to design since it can be rigorously modeled, and also easy to fabricate being a single-layer structure. We will show that unilateral finline mixers have important advantages at THz frequencies since they exhibit wideband operation at both radio frequency (RF) and intermediate frequency (IF), allow elegant on-chip integration of the mixer circuits and result in an extremely simple mixer block that does not require a backshort or any mechanical tuners. The mixer we describe below is fed by a multiple flare-angle smooth-walled horn which exhibits beam pattern characteristic comparable to the conventional corrugated horn and yet is much easier to fabricate. In this paper, we shall present a brief discussion of the testing of the multiple flare-angle horn and detailed description of the design and testing of the mixer, covering ~100 GHz bandwidth centered at 650 GHz. In particular, we will present full electromagnetic de sign description of the mixer chip including the superconducting effects, and the heterodyne properties of the mixer using quantum mixing theory. Mixer performance tests that we carried out from 595 to 702 GHz gave a best receiver noise temperature of 145 K at 600 GHz, corrected for a 75 μm beam splitter. Finally, we performed a thorough analysis of the mixer performance, comparing the experimental results with theoretical models. Our investigation demonstrated that unilateral finline mixers fed by a multiple flare-angle horn can yield performance comparable to conventional designs, hence are suitable for large format mixer array at THz frequencies.

IEEE Transactions on Terahertz Science and Technology•Dec 13, 2011•17 citations
In this letter, we report the near quantum-limited performance of a 230 GHz endfire superconductor-insulator-superconductor (SIS) mixer utilizing a Nb/Al-AlOx/Nb trilayer. An important feature of this mixer is its use of a unilateral finline for the waveguide-to-planar circuit transition, which allows for a wide radiofrequency (RF) bandwidth, a simple waveguide structure with easy alignment, and for the mixer chip to be aligned along the optical axis. Each of these factors is beneficial in the construction of large-format focal plane arrays. We tested the new finline mixer from 210 to 260 GHz in a liquid helium cryostat at ~4 K. The best recorded noise temperature was approximately twice the quantum limit, which is comparable to conventional radial probe mixers. This suggests that endfire SIS mixers can be used in large format arrays, comprising 100s or even 1000s of SIS mixing elements, while retaining state-of-the-art quantum mixing performance.
In this letter, we report the near quantum-limited performance of an end-fire millimetre-wavelength superconductor-insulator-superconductor (SIS) mixer. An important feature of this mixer is its use of a unilateral finline as the input antenna, which allows for a wide RF bandwidth, a simple waveguide structure with easy alignment and for the mixer chip to be aligned along the optical axis. Each of these factors is beneficial in the construction of large-format focal plane arrays. We tested the new finline mixer from 210 to 260 GHz and the best recorded noise temperature was approximately twice the quantum limit, which is comparable to conventional radial probe mixers. This suggests that end-fire SIS mixers can be used in large-format arrays, comprising of 100s or even 1000s of SIS mixing elements, while retaining state-of-the-art quantum mixing performance.
In pursuit of advancing large array receiver capabilities and enhancing the 16-element Heterodyne Array Receiver Program (HARP) instrument on the James Clerk Maxwell Telescope (JCMT), we have successfully fabricated 230 GHz finline superconductor-insulator-superconductor (SIS) mixers. These mixers are critical for assessing the potential and prospective for the HARP instrument’s upgrade. Unlike the existing HARP’s mixer, we replace the probe antenna with an end-fire unilateral finline as the waveguide to planar circuit transition. This mixer design is expected to operate from about 160–260 GHz (approximately 47% bandwidth), and the mixer chips’ current-voltage (I-V) curves have been characterized, showing promising results with a quality factor (Rsg/Rn) exceeding 9.3. Evaluation of the double-sideband (DSB) receiver noise temperature (Trx) is currently underway. Once successfully characterised, our immediate aim is to scale the mixer to operate at HARP’s frequency range near 345 GHz to achieve similar broad RF bandwidth performance. Ongoing simulations are currently being conducted for the design of the 345 GHz finline mixer. This work marks a crucial step toward enhancing HARP receiver performance with better sensitivity and wider Intermediate Frequency (IF) bandwidth, enabling higher-frequency observations, and expanding the scientific potential of the JCMT and its collaborative partners.
Superconductor-Insulator-Superconductor (SIS) tunnel junction mixers are now commonly used in as- tronomical receivers at (sub)millimeter wavelengths because of their superb sensitivity, high dynamic range and stability of operation. Niobium SIS mixers operating at frequencies well below the super- conducting gap (∼680 GHz) have already achieved quantum limited sensitivity. Therefore to further enhance the receiver sensitivity, increasing the Intermediate Frequency (IF) bandwidth of SIS mixers has became crucial. This thesis focuses on the theoretical modeling, design and experimental verifi- cation of Nb SIS mixers operating around 230 GHz with a wide IF bandwidth of 1–15 GHz. These mixers were designed for a single baseline heterodyne interferometer (GUBBINS), which is being built to observe the Sunyaev-Zel’dovich effect in the Cosmic Microwave Background. The combination of wide IF bandwidth SIS mixers and complex analogue correlators will allow GUBBINS to feature high surface brightness sensitivity, that helps to distinguish the weak SZ effect from the background noise. The SIS mixer detector system was assembled inside the GUBBINS cryostat together with the IF electronics and RF/LO optical systems. Low noise temperatures of around 71 K were then measured in the GUBBINS system. The Nb SIS mixer we have developed uses a unilateral finline and fully integrated planar circuits deposited on a silicon substrate, to couple the electromagnetic radiation from the waveguide into the SIS junction. The finline mixer allows a broad-band RF coupling, an easy integration of the on-chip planar circuits and an easy-to-fabricate mixer block. To achieve a wide IF bandwidth, the output impedance of the SIS mixer was well matched to the input impedance of the amplifier by a multi-stage microstrip circuit. Additionally, the planar circuit of the SIS mixer was also designed to have a small lumped inductance and capacitance. The SIS mixer chip was extensively simulated by rigorous electromagnetic software (HFSS) and the S-parameter was exported to a quantum mixing package SuperMix to produce a full-wave model of the mixer. Experimental testing yielded a best noise temperature of 50 K with an average noise temperature of 75 K over an RF bandwidth of 160 GHz– 260 GHz. We have performed thorough experimental and computational investigation of the IF system in particular the constraints on the bandwidth caused by the lumped element capacitance of the mixer chip and the matching of the output impedance of the mixer to the IF amplifier. Our conclusion is that a bandwidth of 1–15 GHz could be achieved using our mixer design, subject to the performance of the amplifier. Finally, a variable temperature load system was successfully developed and tested inside the cryostat, to avoid the losses from the room-temperature optics. We have showed that the noise temperature of the SIS detector could be reduced by as much as 15 K by testing the mixer using a variable temperature load inside the cryostat.
A planar, quasi-optical SIS (superconductor-insulator-superconductor) receiver operating at 230 GHz is described. The receiver consists of a 2*5 array of half-wave dipole antennas with niobium-aluminum oxide-niobium SIS junctions on a quartz dielectric-filled parabola. The 1.4-GHz intermediate frequency is coupled from the mixer via coplanar strip transmission lines and 4:1 balun transformers. The receiver is operated at 4.2 K in a liquid helium immersion cryostat. Accurate measurements of the performance of single untuned array receiver elements are reported. A mixer noise temperature of 89 K DSB (double sideband), receiver noise temperature of 156 K DSB and conversion loss of 8 dB into a matched load have been obtained. This mixer noise temperature is approximately a factor of two larger than that of current state of the art waveguide mixers using untuned single junctions a the same frequency.>
A 230 GHz Superconductor-Insulator-Superconductor (SIS) mixer is designed focusing on a good performance in the IF frequency range of 4–16 GHz over the RF band from 211 to 275 GHz. A transition from a full-height waveguide to a probe is designed using HFSS. The mixer chips containing SIS junctions are designed and optimized to have low total capacitance of circuits to ensure wide IF bandwidth. The chip fabrication was done in Academia Sinica Institute of Astronomy and Astrophysics (ASIAA), where the masks were conducted by TSMC. A lab test was conducted on a superconducting mixer with a cryogenic dewar. The gap voltage in the I-V curve of the mixer is approximately 8 mV, and there is a clear nonlinearity around a current of 110 μA, which matches well with the simulation. The receiver noise temperature is approximately 60 K including optical losses and the noise from the RF input.
We report the design and successful operation of an superconductor-insulator-superconductor (SIS) mixer operating near the superconducting gap of niobium. A key feature of this design is the employment of a unilateral finline taper to transform the waveguide modes to microstrip signals. This transition is easy to design since it can be rigorously modeled, and also easy to fabricate being a single-layer structure. We will show that unilateral finline mixers have important advantages at THz frequencies since they exhibit wideband operation at both radio frequency (RF) and intermediate frequency (IF), allow elegant on-chip integration of the mixer circuits and result in an extremely simple mixer block that does not require a backshort or any mechanical tuners. The mixer we describe below is fed by a multiple flare-angle smooth-walled horn which exhibits beam pattern characteristic comparable to the conventional corrugated horn and yet is much easier to fabricate. In this paper, we shall present a brief discussion of the testing of the multiple flare-angle horn and detailed description of the design and testing of the mixer, covering ~100 GHz bandwidth centered at 650 GHz. In particular, we will present full electromagnetic de sign description of the mixer chip including the superconducting effects, and the heterodyne properties of the mixer using quantum mixing theory. Mixer performance tests that we carried out from 595 to 702 GHz gave a best receiver noise temperature of 145 K at 600 GHz, corrected for a 75 μm beam splitter. Finally, we performed a thorough analysis of the mixer performance, comparing the experimental results with theoretical models. Our investigation demonstrated that unilateral finline mixers fed by a multiple flare-angle horn can yield performance comparable to conventional designs, hence are suitable for large format mixer array at THz frequencies.