The issues of designing a Josephson traveling-wave parametric amplifier (JTWPA) based on a well-established technology of superconducting microcircuits with given and controlled parameters based on high-quality Nb-AlOx-Nb tunnel junctions are considered. This technology has been adapted and optimized to obtain structures with the required parameters and circuits with large number of tunnel junctions. To advance the technology, the basic elements of a promising JTWPA have been devel-oped, manufactured and studied. In direct current measurements, a number of super-conducting elements parameters were experimentally determined; these parameters are required for designing a JTWPA chips for microwave measurements. An original design of JTWPA based on a chain of SQUIDs in a coplanar line has been developed for implementation using the IRE niobium technology; the parameters of the main elements of the JTWPA have been determined.
The issues of designing a Josephson traveling-wave parametric amplifier (JTWPA) based on a well-established technology of superconducting microcircuits with given and controlled parameters based on high-quality Nb-AlOx-Nb tunnel junctions are considered. This technology has been adapted and optimized to obtain structures with the required parameters and circuits with large number of tunnel junctions. To advance the technology, the basic elements of a promising JTWPA have been devel-oped, manufactured and studied. In direct current measurements, a number of super-conducting elements parameters were experimentally determined; these parameters are required for designing a JTWPA chips for microwave measurements. An original design of JTWPA based on a chain of SQUIDs in a coplanar line has been developed for implementation using the IRE niobium technology; the parameters of the main elements of the JTWPA have been determined.
Abstract The issues of designing a Josephson traveling-wave parametric amplifier (JTWPA) based on a well-established technology of superconducting microcircuits with given and controlled parameters based on high-quality Nb–AlOx–Nb tunnel junctions are considered. This technology has been adapted and optimized to obtain structures with the required parameters and circuits with large number of tunnel junctions. To advance the technology, the basic elements of a promising JTWPA have been developed, manufactured and studied. In direct current measurements, a number of superconducting elements parameters were experimentally determined; these parameters are required for designing a JTWPA chips for microwave measurements. An original design of JTWPA based on a chain of SQUIDs in a coplanar line has been developed for implementation using niobium technology of the Kotel’nikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences. The parameters of the main elements of the JTWPA have been determined.
The issues of designing a Josephson traveling-wave parametric amplifier (JTWPA) based on a well-established technology of superconducting microcircuits with given and controlled parameters based on high-quality Nb-AlOx-Nb tunnel junctions are considered. This technology has been adapted and optimized to obtain structures with the required parameters and circuits with large number of tunnel junctions. To advance the technology, the basic elements of a promising JTWPA have been devel-oped, manufactured and studied. In direct current measurements, a number of super-conducting elements parameters were experimentally determined; these parameters are required for designing a JTWPA chips for microwave measurements. An original design of JTWPA based on a chain of SQUIDs in a coplanar line has been developed for implementation using the IRE niobium technology; the parameters of the main elements of the JTWPA have been determined. Keywords: Josephson travelling-wave parametric amplifiers (JTWPA), Josephson metamaterials (JMM), Josephson junctions (JJs), cold amplifier, coplanar lines, quantum noise, SIS, SQUIDs.
We designed, fabricated, and tested several prototypes of a Josephson Travelling Wave Parametric Amplifier (JTWPA) with aluminum SIS junctions integrated in series array of dc SQUIDs in the central line of coplanar waveguide. Three types of fabrication recipes were tested: two with shadow evaporation and one with magnetron sputtering and direct e-beam lithography. IV curves of SQUIDs were measured at bath temperature of 0.3 K. We developed a cryogenic setup for meas-urements of spectral characteristics of JTWPA comprising cold HEMT amplifier with circulator, cold attenuators and filters in signal and pump coaxial lines. Resonant characteristic of coplanar quarter-wave resonator with directional coupler intended for short JTWPA was measured.
Recent progress in physics has increased the necessity for ultra-low noise amplifiers capable of operating at the quantum limit performance. These amplifiers are essential to enhance astronomical detection, dark-matter search, and qubit readout in quantum computing, among other applications. Superconducting Josephson junction Travelling Wave Parametric Amplifiers (JTWPAs) operated in the microwave range, have demonstrated high gain over several gigahertz (GHz) bandwidth, with quantum-limited noise performance and minimal heat dissipation. These excellent properties make JTWPAs an ideal solution for ultra-low noise amplification. This thesis delves into the design, fabrication and characterisation of JTWPAs operated in the microwave (1-16 GHz) and the W-band (70-115GHz) regimes. A generalised coupled-mode equations (CME) framework describing JTWPAs based on Josephson junctions and DC superconducting quantum interference devices (SQUIDs) is introduced. This framework can be combined with electromagnetic (EM) simulation softwares to model the JTWPAs, facilitating their design. It is therefore used to model two microwave JTWPA designs, using parallel plate capacitors (PPCs) and interdigitated capacitors (IDCs). The fabrication and characterisation of both designs are presented, and possible fabrication and design issues are carefully discussed. Despite these issues, we observed broadband gain in the JTWPA with PPCs, achieving > 20 dB gain at several frequency points, and a measured P1dB = −95.8dBm when operated at 17.3 dB. The RF properties of a 500-junction Josephson array are also presented in this manuscript. The device creates a Fabry-Perot cavity, leading to non-travelling wave parametric effects, such as narrow-band gain. We also observed indications of efficient phase-sensitive amplification. The thesis is concluded with the first — to the best of our knowledge — experimental attempt to extend the operational frequency of a JTWPA to the W-band. The novel design, fabrication techniques and characterisation of the W-band JTWPA are discussed in detail in this manuscript, leading to promising results suggesting that JTWPA could operate at high frequencies.
The development of large-scale superconducting quantum computers critically depends on the accurate readout of qubit states. To enable this, cryogenic parametric amplifiers have been proposed and developed, and have since found widespread use in small-signal detection applications. Among various amplifier architectures, Josephson traveling-wave parametric amplifiers (JTWPAs) are widely adopted due to their broad bandwidth, high saturation power, and compatibility with superconducting qubits. In this work, we present a design workflow of JTWPAs based on a co-simulation approach combining electromagnetic (EM) and circuit-level simulation. We apply this method to a uniform JTWPA, comparing our simulation results with experimental data. To mitigate the challenge of constructing lumped element circuit models usually used in conventional simulation method, we directly perform full EM analysis of the device to accurately determine its linear response. The extracted S parameters are then fed into a nonlinear harmonic balance simulator with Josephson junctions modeled as circuit elements. By doing so, the linear and gain properties of the JTWPA are extracted. Different factors that impact device performance including gain compression, phase matching, and fabrication imperfections are further investigated and modeled. A good agreement between simulation and measurements is identified, establishing the effectiveness of our approach in designing quantum parametric amplifiers.
This paper examines the use of a quantum electronics Josephson Traveling-Wave Parametric Amplifier (JTWPA). The JTWPA presents distinctive features for amplifying quantum signals through the nonlinear Josephson junction, influenced by quantum effects at microwave energy scales. The study focuses on characterizing this quantum effects-based parametric amplification, offering perspectives in communication and information processing technologies. The results, obtained with the Advanced Design System (ADS) pathWave tool suggest promising applications of JTWPA, paving the way for significant advances in quantum electronics. Notably, the findings indicate that at a fixed frequency of 4 GHz and a constant pump current of 1.85 µA, the transmission efficiency of JTWPA decreases by 32% when exporting the design as layouts using the High-Frequency Structural Simulator (HFSS). Consequently, optimization with ADS emerges as a crucial step to assess transmission and information processing before the physical implementation of the JTWPA design.