Moving-frame imaging of transiting cold atoms for precise long-range transport
Meung Ho Seo, In Hwan Do, Hansuek Lee, Dai-Hyuk Yu, Sangwon Seo, Hyun-Gue Hong, Jeong Ho Han, Sang Eon Park, Sang-Bum Lee, Taeg Yong Kwon, Jongchul Mun, Jae Hoon Lee
Transporting cold atoms between interconnected vacuum chambers is an important technique for increasing the versatility of cold atom setups, particularly for those that couple atoms to photonic devices. In this report, we introduce a method where we are able to image the atoms at all points during transport via moving optical dipole trap. Cooled 87Rb atoms are transported ∼50 cm into an auxiliary vacuum chamber while being monitored with a moving-frame imaging system for which in-situ characterization of the atom transport is demonstrated. Precise positioning of the atoms near photonic devices is also tested across several tapered fibers showing an axial positioning resolution of ∼450 μm.
Transporting cold atoms between interconnected vacuum chambers is an important technique for increasing the versatility of cold atom setups, particularly for those that couple atoms to photonic devices. In this report, we introduce a method where we are able to image the atoms at all points during transport via moving optical dipole trap. Cooled 87Rb atoms are transported ∼50 cm into an auxiliary vacuum chamber while being monitored with a moving-frame imaging system for which in-situ characterization of the atom transport is demonstrated. Precise positioning of the atoms near photonic devices is also tested across several tapered fibers showing an axial positioning resolution of ∼450 μm.
We report the design and application of an optically compensated zoom lens supporting a moving optical dipole trap for transporting cold atoms. The proposed zoom lens is designed to have tunable magnification in a compact form factor which can significantly reduce the required long optical path lengths in conventional moving optical dipole trap systems. Without the need of mechanical cams for zooming, the optically compensated zoom lens has the ability to control the position of the trap along the optical axis with high precision while maintaining a constant trap depth by conserving the numerical aperture of the laser beam focus during the transport. We experimentally comprise an optically compensated zoom lens having dimensions of $\ensuremath{\lesssim}20$ cm in length, which can be readily configured to suit a wide range of desired transport lengths from 0.15 to 3 m and displacement magnifications from 7 to 100. The performance of our moving optical dipole trap is tested for a target transport length of 600 mm using a 532 nm laser beam on laser-cooled ytterbium atoms. The atoms can be transported to an adjacent vacuum chamber using this optically compensated zoom lens with $\ensuremath{\sim}89%$ efficiency.
A high imaging resolution or a tight focus of a laser beam imposes a certain minimal numerical aperture (NA) of the optical system. Macroscopic high NA lenses constraint strongly the spatial organization of experiments, in particular when imaging or trapping cold atoms inside a vacuum chamber. Multimode fibers, in conjunction with spatial light modulators, offer an interesting alternative to high NA lenses. Indeed, they are flexible optical waveguides with very small transverse dimensions (∼ 100 μm), and reasonably high NA (up to 0.5). For those reasons, the use of multimode fibers for imaging or laser manipulation purposes has been widely studied in the past years. Here, we transfer these techniques to the field of cold atoms with a multimode fiber forming a compact optical bridge between the inside and the outside of an ultra-high vacuum chamber. We manipulate atoms with laser beams produced through the fiber by digital optical phase conjugation with a spatial light modulator. We are able to transport a small cloud of cold rubidium atoms with a moving optical lattice at about 200 μm from the fiber tip. We can then load them in small optical tweezers with a waist of 1.2 μm. By characterizing the propagation of light modes inside the fiber, we numerically invert its transformation and we reconstruct absorption images of the trapped atoms with a resolution of approximately 1 μm. These results pave the way towards the efficient use of multimode fibers in spatially constrained quantum technology platforms relying on cold atoms.
This thesis describes and characterizes a setup to conduct experiments combining the fields of cold atoms and nanophotonics. Furthermore, a series of numerical simulations is employed to deepen of atom transport under experimentally realistic conditions. The study of cold atoms is usually fundamental in nature and a very clean approach to investigate the laws of physics. High purity samples of atoms are cooled down to millikelvins or microkelvins. The potential landscape for the atoms can be carefully controlled using lasers and/or magnetic fields. Since the atoms' responses to electric, magnetic or electromagnetic fields are known with very high fidelity, any deviations to the state the atoms are prepared in can be precisely measured. Nanophotonics is the study of light close to or beyond the diffraction limit. In this region the field-like nature of light starts to play a role. By confining light in sub-wavelength-sized structures, high peak intensities can be achieved, giving rise to exciting non-linear optics phenomena. The strong field gradient that can be created allows, for instance, precise spectroscopy measurements, phase-sensitive sub-wavelength microscopy, as well as producing highly receptive sensing devices. Combining cold atoms and nanophotonics creates strong synergy effects. It gives access to strong coupling of light and matter. The scalability of nanophotonics now extends to atomic physics. Atoms can be trapped, coupled and manipulated at very small length scales, and in large numbers. Moreover, the potential landscape for atoms is highly customizable. The rubidium isotope 87 is used in this setup. A cloud of rubidium atoms is gathered and cooled in a two dimensional magneto-optical trap (MOT). Since the atoms are only cooled in two dimensions, they are free to escape in the third dimension and load a following three dimensional MOT. The atoms are now cooled further, compressed and loaded into an optical dipole trap. This dipole trap transports the atoms close to a sample inside the vacuum chamber. A moving optical lattice, or optical conveyor belt, brings the atoms then close to the sample surface. Now experiments can be conducted, studying the interaction of cold atoms and strongly confined light. The atom transport down to the sample surface shows some unexpected behaviour: the atoms seem to spread through the optical lattice during transport. A combination of microscopic and macroscopic numerical simulations, including genetic algorithms, are used to deepen our understanding of the underlying physics. This also allows us to get access to experimental variables that cannot be directly obtained.
Atom optics has been a highly active field of research with many scientific breakthroughs over the past two decades, largely due to successful advances in laser technology, microfabrication techniques, and the development of laser cooling and trapping of neutral atoms. This dissertation details several atom optics experiments with the motivation to develop tools and techniques for precision atom wave interferometry. It provides background information about atom optics and the fundamentals behind laser cooling and trapping, including basic techniques for cold gas thermometry and absorptive detection of atoms. A brief overview of magnetic trapping and guiding in tight wire-based traps is also provided before the experimental details are presented. ❧ We developed a novel laser source of 780 nm light using frequency-doubled 1560 nm fiber amplifier. This laser system provided up to a Watt of tunable frequency stabilized light for two Rb laser cooling and trapping experiments. One system generates Bose-Einstein condensates in an optical trap while the second is based on atom chip magnetic traps. The atom chip system, detailed in this thesis, was designed and built to develop the tools necessary for transport and loading large numbers of cold atoms and explore the potential for guided atom interferometry. Techniques and results from this experiment are presented, including an efficient magnetic transport and loading method to deliver cold atom to atom chip traps. We also developed a modeling tool for the magnetic fields formed by coiled wire geometries, as well as planar wire patterns. These models helped us design traps and determine adiabatic transportation of cold atoms between macro-scale traps and micro-traps formed on atom chips. Having achieved near unity transfer efficiency, we demonstrated that this approach promises to be a consistent method for loading large numbers of atoms into micro-traps. Furthermore, we discuss an in situ imaging technique to investigate magnetic field contours of the traps and the dynamics of atoms within those confining potentials. We also controlled the propagation along the atom chip guides by accelerating atoms with longitudinal magnetic gradients, and investigated an atom focusing scheme. ❧ While the atom chip wire guides perform a role analogous to optical fibers guiding light waves, ""free space"" cold atoms offer great opportunity for precision interferometry. We describe a second on-going atom optics experiment that measures gravity gradients using a pair of atom fountain interferometers separated by one meter. We have demonstrated Gravity Gradiometer resolution down to 4x10⁻⁹ g/m using a 40 kg test mass. The atomic physics subsystem is described in detail, including the vacuum, cold atom source, optics, magnetic coils and shields, and vibration isolation and compensation. The system is designed to be a compact, robust, transportable instrument, taking strides towards future gravity gradient measurements in the field. In the realm of space applications, there has been interest for micro-gravity science experiments aboard the International Space Station, along with instrument development for gravity mapping of Earth and planetary bodies with satellite-based instruments. Furthermore, there are ground-based applications for gravity imaging of local density distributions, precision measurement of gravity, as well as proposals for redefining the kilogram, detecting gravitational waves and determining the Gravitational constant.
We develop an ultracompact high-resolution imaging system for cold atoms. Its only in-vacuum element is a multimode optical fiber with a diameter of 230 $\ensuremath{\mu}\mathrm{m}$, which simultaneously collects light and guides it out of the vacuum chamber. External adaptive optics allow us to image cold Rb atoms with approximately 1-$\ensuremath{\mu}\mathrm{m}$ resolution over a $100\ifmmode\times\else\texttimes\fi{}100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}{\mathrm{m}}^{2}$ field of view. These optics can be easily rearranged to switch between fast absorption imaging and high-sensitivity fluorescence imaging. This system is particularly suited for hybrid quantum-engineering platforms where cold atoms are combined with optical cavities, superconducting circuits, or optomechanical devices restricting optical access.
Quantum computing exploits the laws of quantum mechanics to exponentially increase computing rate for certain processes. A realized quantum computer could break encryptions and simulate large quantum systems previously unbreakable and unattainable with classical computers. Neutral atom quantum computing is a viable candidate for building these devices that satisfies four of the five criteria for a successful quantum computer. We are exploring a novel method in creating neutral atom qubits that involves a magneto-optical trap and a dipole trap created in the diffraction pattern behind an array of pinholes. The magneto-optical trap works to cool the atoms and centralize them into a cold-atom cloud in an ultra-high vacuum chamber. Laser light is then projected into the chamber through the array of pinholes, trapping the cooled atoms in light traps. In order to test the efficiency of our trapping method, I have developed an imaging system that monitors the atoms. The system is comprised of a high-speed camera that takes images of the trap while a photodiode measures the fluorescence signal from the cold-atom cloud. These measurements are used to determine the number of atoms successfully trapped, how long they remain trapped, and the trap frequency. This paper presents the details and process of developing the complete imaging system.